AutoCAD Inventor :: Drawing Templates And Title Blocks
Apr 15, 2013
Have more than one drawing template? (we use A and B size sheets)
My questions concerns, metric vs imperial A vs B vs C etc etc drawing sheet size title block does not scale down accordingly when change sheet size within an existing drawing template.
Is it possible to have one drawing template that can be toggle imperial vs metric, and then sheet size selected and then the title block scaled down or up accordingly? (I would assume this could be done using iLogic)
Or is it normal to have different drawing templates for sizes and units?
View 9 Replies
ADVERTISEMENT
May 16, 2013
I have trouble modifying the title blocks for the map book templates . Is there a specific folder that I need to save the adjusted title block in. Going through the block editor doesn’t work so I’m exploding the block and once I do that the links have been broken between the title block and map books.
View 2 Replies
View Related
Mar 25, 2011
I want to import default templates (Title Blocks) with in Auto cad. Is there any option ? How to proceed?
View 3 Replies
View Related
Dec 6, 2012
I'm going to take the computer home tonight so that I can set up as many drawing templates that I will conceivable need at work.
Are there any special ways to go about this or CAD standards that I should observe?
I mostly use A3 and A4 paper for architectural metric drawings.
Is it worth making me own templates so that I can just jump into future drawings or is it better to download templates from the internet?
View 9 Replies
View Related
Aug 29, 2013
we have just upgraded from Inv 2011 to 2013. I am trying to create the drawing templates in 2013 by using the blank 2013 template and then copying our border from 2011 onto it. This works a treat apart from 1 thing.
The i properties do not get copied over as well so the sheet is blank from drawing number, title and the custom properties etc.
View 6 Replies
View Related
Apr 26, 2013
The title blocks that we use have prompted entries in them and I would like to find a way using iLogic to copy the entries from one title block to another within the same drawing; i.e.. if the user decides to change from an A2 to A1 drawing.
I already have an iLogic rule which allows the user to change the active border, title block and sheet size based on a form selection but would like it to capture the prompted entries already entered and re-use them after the change.
View 9 Replies
View Related
Mar 30, 2013
I wanted to get opinions on the most efficient way of creating & saving title blocks, with regards to using them in future projects.
1. Create a title block in model space then save it as a .dwt file
OR
2. Create a title block in model space then save it as a block
I can't imagine there's a right or wrong way, just wanted get your input. Chances are you all know something I don't.
View 9 Replies
View Related
Oct 24, 2013
ideas on Drawing Revision Table / Record on Title Blocks that they would share?We are re-designing our Title Blocks and I was wondering if there was a different or better way of doing this, besides a static block with attributes.
View 2 Replies
View Related
Mar 14, 2011
Right now I'm copying it from one file to the other... but I'm sure there is some other way. Are title blocks saved anywhere other than embebed in the file? Autodesk Product Design Suite 2012 Ultimate Autodesk Developer Network [URL]
View 9 Replies
View Related
Aug 22, 2013
I need to insert two different (separate) title blocks into my idw drawings so both show on the drawing. One is the real Title block, and one is a Revision History block. I have listed them as Title blocks under Drawing Resources, but Inventor won't allow me to insert both. Is there any way round this?
I do not want the Revision History block as a Symbol.
Inventor 2011; MS Windows 7-64; i5-2500; 8Gb; GF550Ti.
View 9 Replies
View Related
Aug 14, 2013
i have created some dynamic title blocks with text attributes in title column. I have gone back an added some more attributes at a later date and these new ones will not move with my dynamic stretch! I have tried everything, modifying the action, re-doing the action, nothing works!
View 3 Replies
View Related
Nov 21, 2013
Im trying to make a small tool that i can share with other users that allows at the click of a button, a form to give options for titles & borders. Im pretty good with VBA but new to Inventor objects. The tool itself will change all of the borders & title blocks in multiple sheets to the selects ones on the form in one go.
I have the code set up to loop through the sheets and delete / replace all borders & title blocks and this works great. Im trying to find how i can loop through the borders & title blocks so that i can get them into a combo box for each. I cant find anything about this on the internet.
View 4 Replies
View Related
Mar 20, 2012
I'm trying to insert our company logo (a DXF file) into the a title block definition however the insertion point seems to default to 0,0.How can I insert it with a user defined insertion point?
You will see from the attached screen snipe what I mean about being forced to insert it at the 0,0, coordinates. I'd like to insert it into clear space then scale it and move it into replace the existing logo.
View 4 Replies
View Related
Apr 23, 2013
I can't for some reason get this rule to work, simply want to be able to choose what title block to use.
I created a text parameter with the multi-values: TES ELE and TES EQU
I have 2 title blocks in my template called TES ELE and TES EQU
Here is my code, basically, I want to rule to apply the title block based on the selection, which will be done on a form.
If Title = "TES ELE" ThenActiveSheet.TitleBlock = "TES ELE"ElseIf Title = "TES EQU" ThenActiveSheet.TitleBlock = "TES EQU"End IfInventorVb.DocumentUpdate()ThisApplication.ActiveView.Fit
I have found many threads in this forum and have used their solutions for this rule, but for some reason, my rule will not select the title block and place it in the drawing.
Here is a snap of my set-up and my template file is attached
Inventor Professional 2014-Update 2 - AutoCAD Electrical 2014
Win7-x64 | ASUS P8Z77-V | i7 3770 -3.4 GHz | 32GB RAM |
240GB SSD | nVidia GTX 670 4GB - 320.49
View 9 Replies
View Related
Feb 24, 2012
I have a problem with my title block.
If I create a new drawing today the date is correct. But if I open it tomorrow and open a new sheet its still todays date.
How do I make the date changed with the new sheets??
View 1 Replies
View Related
Jun 6, 2013
I am trying to create an iLogic (or VB) rule to update an active drawing title blocks from our Template File.I don't want to use any of the external software (Transfer Wizard etc), we just need a simple rule that will update the title blocks when we need to.
View 9 Replies
View Related
Jan 18, 2012
I am trying to update the text in the idw title block externally via excel or ilogic. I know of the iproperty of the part or the iam and that being able to be incorporated in the idw title block. But is there any way of linking an excel file to the idw so once the excel file is changed it updates all the idw title blocks it references?
View 2 Replies
View Related
Nov 1, 2012
I want to change the Arrow Side Position for Weld Symbols from Top to Bottom for all future drawings. I have opened the Drawing Template (Standard.idw) and opened the Styles Editor and switched the Arrow Side Position and saved the template. Then I have tested. In the template it works good, but when I open a new drawing (based on the template) the arrow side position didn't change.
View 4 Replies
View Related
Dec 6, 2012
I have a problem in which when i set up my title block templates, when i set them up and keep my template inside the dashed area the printed dwg is either cropped or too far inside so it has to be well outside at the top to print within 10 mm of the actual paper, attached is an image of how i have to do it to make it print within 10 mm of the edge of the paper print.
View 3 Replies
View Related
Mar 1, 2013
I was able to draw A1, A3 and A4 title blocks in model space before giving each of these title block drawings a layout paperspace tab at the correct paper size.
I wanted to be able to start new drawings with the title blocks and paper sizes already done.
But what happens when the beginning of a new drawing project is with a drawing that someone else has already done? I am starting a new project and I would like to focus in one one room in a large building. This means that I plan to end up with a 1:50 drawing of a room on my pre-set A3 sheet and title block.
Do I import this person's drawing into my drawing of the three title blocks in model space with the three paperspace tabs or do I import the title blocks into the other person's floor plans?
View 3 Replies
View Related
Jun 18, 2012
I'm having an error with Ilogic parameters.I just wanna change the border and the title blocks with Ilogic. This should be simple. Isn't this?
View 2 Replies
View Related
Mar 3, 2011
i am trying to set up templates at a new job and i want to create templates with an xref for the title block so when we start a new drawing, we use the template, save to the project file and everything is there with our title block already xref'd. my problem is, the path on the xref'd title block stays the same and is still referencing the location of the file i used when creating the template. if possible, when i save the new drawing to the project foldeer i want the xref to also move to the project file and the path to the xref to change.
View 4 Replies
View Related
Jan 22, 2013
Is there an add in or something for faster type in the title block in a drawing? Name, title etc?
Right now the author and date are automatically but when i save the file to for example to "D1234 hammer" it becomes the part number.
I have to edit the title.
I want to save the file to "D1234 hammer" and the partnumber to be "D1234" and title "hammer".
IS there a add-in that I type the title and name and its auto fill the title block? Or do I have to create a custom title block so the drawing can understand to only to take the numbers from <part name> and the letters becomes <title>?
View 3 Replies
View Related
Aug 17, 2012
We are going to be making a new title block and I have been looking at ways to get the new title block into the old drawings. It looks like the Inventor Drawing and Resource Wizard is the way to go.
The steps seem pretty straight forward and simple but I am not getting the correct results. For the source drawing I select my new title block and leave the boxes for borders, my new title block name, and sketched symbols checked. I then pick my drawing I want to get the new title block in. On the last step I can select Yes or No and get the same results. When I reopen Inventor and the drawing it still has the old title block in it.
View 4 Replies
View Related
Jan 9, 2014
I am trying put drawing numbers on my drawings. The drawing number is "019-02-00038-x" where "x" is the page number in the set of drawings. How do I set this up? Every time I try to change "x" it changes it for the entire set of drawings.
I'm working with Inventor 2014.
View 1 Replies
View Related
Oct 26, 2011
Is it possible to set the drawing Scale to the Title Block? Seems like it is missing parameter...
View 8 Replies
View Related
Oct 17, 2013
There don't seem to be any title templates in my new Premier Pro CC.
I have also installed CS6 PP as I want the Encore program - the templates are loaded in that version.
View 18 Replies
View Related
Apr 13, 2012
I was curious, when creating multi sheet drawings, how can I place different information in the title block on each drawing?
Example, 2 pages, Description on page 1 = PAGE 1 DESC, by default this same description will show up on all subsequent pages. How do I get page 2 description to be different?
Inventor 2014 PDS
View 5 Replies
View Related
Dec 12, 2011
Can I pre-fill some of text in my drawing’s title block under the “Field Text” –“Edit Property Fields” ? Because some of the files I will use the same text again and again, if I can save the pre-fill text title block in the template, it will save me lots of time.
View 6 Replies
View Related
Aug 5, 2013
adding an unused template drawing title block resource.
'UPDATE TITLE BLOCK SHEET 1ThisDrawing.ResourceFileName="X:TemplatesStart Drawing.idw"
ThisDrawing.KeepExtraResources=False
DimoDrawingDocAsDocument=ThisApplication.ActiveDocument
'If iProperties.Value("Custom", "V1Scale") = NullString
oDrawingDoc.ActiveSheet.TitleBlock.Delete
[code]....
View 7 Replies
View Related
Nov 3, 2011
I want to add new properties so I can have new, custom rows when I go to Fields text in a drawing environment?
I can see how you add Prompted Entry ans so. Cant add anything to basic properties.
View 4 Replies
View Related
