I'm trying to insert our company logo (a DXF file) into the a title block definition however the insertion point seems to default to 0,0.How can I insert it with a user defined insertion point?
You will see from the attached screen snipe what I mean about being forced to insert it at the 0,0, coordinates. I'd like to insert it into clear space then scale it and move it into replace the existing logo.
I have some code to replace the current title block with a title block from a template file. I just don't like how it adds a new title block definition named "copy of titleblock". I'd like to delete or replace the current title block definition so only the newly added one is listed.
Sub test() Dim odrawdoc As DrawingDocument Set odrawdoc = ThisApplication.ActiveDocument If (odrawdoc.DocumentType <> kDrawingDocumentObject) Then Exit Sub Dim oTemplate As DrawingDocument Dim oSourceTitleBlockDef As TitleBlockDefinition Dim oNewTitleBlockDef As TitleBlockDefinition Dim oSheet As Sheet Set oTemplate = ThisApplication.Documents.Open(ThisApplication.FileOptions.TemplatesPath & "template.idw", False) Set oSourceTitleBlockDef = oTemplate.ActiveSheet.TitleBlock.Definition Set oNewTitleBlockDef = oSourceTitleBlockDef.CopyTo(odrawdoc) ' Iterate through the sheets. For Each oSheet In odrawdoc.Sheets oSheet.Activate oSheet.TitleBlock.Delete Call oSheet.AddTitleBlock(oNewTitleBlockDef) Next oTemplate.CloseEnd Sub
I'm just being picky at this point, but I don't want a buildup of title block definitions. We reuse drawings all the time which is why a simple method of updating a title block would be nice. I can just imagine in some years time after a title block update or two there are 20 "copy of copy of copy of .................. titleblock" listed in a drawing file.
The title blocks that we use have prompted entries in them and I would like to find a way using iLogic to copy the entries from one title block to another within the same drawing; i.e.. if the user decides to change from an A2 to A1 drawing.
I already have an iLogic rule which allows the user to change the active border, title block and sheet size based on a form selection but would like it to capture the prompted entries already entered and re-use them after the change.
I need to insert two different (separate) title blocks into my idw drawings so both show on the drawing. One is the real Title block, and one is a Revision History block. I have listed them as Title blocks under Drawing Resources, but Inventor won't allow me to insert both. Is there any way round this?
I do not want the Revision History block as a Symbol.
Inventor 2011; MS Windows 7-64; i5-2500; 8Gb; GF550Ti.
I have a drawing with all my block definitions and the blocks inserted and annotated. Seems that in a previous version of Autocad, I could insert the drawing and cancel the insertion at some point of the insertion command sequence, such that the drawing was not inserted, but all the block definitions remained. I could then use the insert command and all of these blocks were available. Yes, sometimes this made my drawing memory size rather large and I would have to purge the unused blocks later to reduce the memory size of my drawing.
View 1 Replies View RelatedI am new to dynamic blocks. I have figured out how to use the Properites block for "preset" definitions but we offer a product in infine sizes (within limits). For example the width may range from 30" to 200" in fractional increments which is impossible to set up presets. Is there a way that a person can set up the properties block so that a person would be prompted to enter required information, I.E. Width = xx", Height = xx" etc.?
View 3 Replies View RelatedIs it possible to create a block to insert on our title block that will populate itself with a list of drawings and names?
I know this is possible through the use of LISP and the Sheet Set Manager, but could this be done through a combination of attributes and fields (we want the same functionality in LT).
I need to insert a Key Plan as a small part in my title blocks. I have a key plan ready in my model section. I did tried to play around in the block editor but could not find anything useful. I wish I could insert the key plan like viewport in the layout section.
On the side, my file directory always showed up on the paper when I printed my drawing out. Do you know how I can get rid of this ?
How do I insert a title block into my drawing?
View 9 Replies View RelatedIm wondering if there is a fast and atuomated way to insert a title block onto the layout tab throughout an existing project?
View 1 Replies View RelatedHow to insert a title block from MS and fit to the PS without affecting the scale?
View 9 Replies View RelatedI'm trying to edit an architectural Title Block. I've went into block editor and did attribute definitions. However, when I save it I can't insert it into a drawing. Is there anything I can do to prevent this from happening?
View 2 Replies View Related1. I want to all selected profiles or blocks set to one object, than continue to select second object,(see attached drawing file). How to write the "ssget" lisp.
2. Command "line" ask me specify next point.
3. Found object boundary prompt me to "select oblect", when i selected profile, with the error: bad argument type: consp.
I have just finished my design and I wanted to insert a title block and annotations with pictures using the paperspace option. I want to print the design out onto A1 Paper (80000mm x 56000mm) to a 1:100 scale.
What I want to know is what is the dashed line, how do I make the paperspace A1 size and a 1:100 scale, as well as wanting to know how to make the title block and add annotations to the design.
One problem I am facing is that any line I do create comes out bold as well as when I zoom into the drawing itself every line is bold. Why is this?
I am trying to insert a block into a drawing that uses dynamic blocks. I want the block to be associated to the dynamic block, so that when I alter a linear stretch parameter on the dynamic block it moves the other block.
I am probably missing something obvious, but have now googled my mind into a numb state and can't make any more progress.
I'm new to .net for autocad, but very familiar with c#. I studied some samples about creating a block from c#. I have a form for some basic input. When the user presses OK the code checks if the blockname is already in use. When no it creates the block using following
private void make_block() { double nextpoint = 0.0; double linedis = 7.3634; Document doc = Autodesk.AutoCAD.ApplicationServices.Application.DocumentManager.MdiActiveDocument; Database db = doc.Database; Editor ed = doc.Editor; using (Transaction tr = db.TransactionManager.StartTransaction()) {
[code]......
The code runs successfully (meaning i don't get any errors), but when I want to insert the block it isn't in the list of blocks.
Any way to get a scale bar/title block text to reflect plotting at half size?
We use the common (24x36) sheet size for all projects, but when plotting we send out half size (12x18) as well. This means the scale bar reading 1"=40' is no longer correct. It should read 1"=20'. I would like to automate this.
I've created a dynamic block with two visibility states. The second state is a copy of the first state, but some of the attribute definitions have been moved, along with some of the geometry.
When I insert the block, then toggle between the two visibility states, the geometry changes as I would expect, but the attributes stay in the position dictated on the first state.
How can I make sure that the attributes move for the second state, as I need them to.
Right now I'm copying it from one file to the other... but I'm sure there is some other way. Are title blocks saved anywhere other than embebed in the file? Autodesk Product Design Suite 2012 Ultimate Autodesk Developer Network [URL]
View 9 Replies View RelatedBasically I have a rectangle and want to change the dimensions of it. There are a couple of attributed definitions that I want to stretch the and change it length but I alsowant the attributed definitions to move with the right hand side of the rectangle and the stay a constant distance from the right hand side. Unfortunately when I use the stretch action it filters out the attributed from the object that I can stretch, any way to include these AD’s with the stretch action
View 3 Replies View RelatedI have a drawing ("SURUBURI.dwg") with several dynamic blocks ("M12", "M16", "M18" ... an so on...). I want to insert in my current drawing, one of the blocks from SURUBURI.dwg, for instance the block named "M12".
For that i tried creating a new command "INSERT_M12" that has the following script :
^C^C-INSERT; "I:/Ionut Mihaila/Goodies/SURUBURI.dwg/M12"
Now obvious that doesn't work, but i think it shows clearly what i want to accomplish. So is there an other way to do this?
Have more than one drawing template? (we use A and B size sheets)
My questions concerns, metric vs imperial A vs B vs C etc etc drawing sheet size title block does not scale down accordingly when change sheet size within an existing drawing template.
Is it possible to have one drawing template that can be toggle imperial vs metric, and then sheet size selected and then the title block scaled down or up accordingly? (I would assume this could be done using iLogic)
Or is it normal to have different drawing templates for sizes and units?
i have created some dynamic title blocks with text attributes in title column. I have gone back an added some more attributes at a later date and these new ones will not move with my dynamic stretch! I have tried everything, modifying the action, re-doing the action, nothing works!
View 3 Replies View RelatedIm trying to make a small tool that i can share with other users that allows at the click of a button, a form to give options for titles & borders. Im pretty good with VBA but new to Inventor objects. The tool itself will change all of the borders & title blocks in multiple sheets to the selects ones on the form in one go.
I have the code set up to loop through the sheets and delete / replace all borders & title blocks and this works great. Im trying to find how i can loop through the borders & title blocks so that i can get them into a combo box for each. I cant find anything about this on the internet.
I can't for some reason get this rule to work, simply want to be able to choose what title block to use.
I created a text parameter with the multi-values: TES ELE and TES EQU
I have 2 title blocks in my template called TES ELE and TES EQU
Here is my code, basically, I want to rule to apply the title block based on the selection, which will be done on a form.
If Title = "TES ELE" ThenActiveSheet.TitleBlock = "TES ELE"ElseIf Title = "TES EQU" ThenActiveSheet.TitleBlock = "TES EQU"End IfInventorVb.DocumentUpdate()ThisApplication.ActiveView.Fit
I have found many threads in this forum and have used their solutions for this rule, but for some reason, my rule will not select the title block and place it in the drawing.
Here is a snap of my set-up and my template file is attached
Inventor Professional 2014-Update 2 - AutoCAD Electrical 2014
Win7-x64 | ASUS P8Z77-V | i7 3770 -3.4 GHz | 32GB RAM |
240GB SSD | nVidia GTX 670 4GB - 320.49
I have a problem with my title block.
If I create a new drawing today the date is correct. But if I open it tomorrow and open a new sheet its still todays date.
How do I make the date changed with the new sheets??
I am trying to create an iLogic (or VB) rule to update an active drawing title blocks from our Template File.I don't want to use any of the external software (Transfer Wizard etc), we just need a simple rule that will update the title blocks when we need to.
View 9 Replies View RelatedI am trying to update the text in the idw title block externally via excel or ilogic. I know of the iproperty of the part or the iam and that being able to be incorporated in the idw title block. But is there any way of linking an excel file to the idw so once the excel file is changed it updates all the idw title blocks it references?
View 2 Replies View RelatedI have done a new Title Block in our drawing templates.
It only works in New drawings if I open an old drawing I must "Copy/paste" the new Title Block into the browser to the left But I want all our old drawings to use the new Title Block.
Is there a way to have the new Title as default on all old drawings?
How can I customize the title block where it says Drawn, Checked and approved?
I want the dates with initials to place automatically. However, I want the date of approval and checked to be 2-5 days after the drawn date. (using Inventor pro. 2012)
I am trying to replace the title block of the first sheet of the active drawing via C#. I currently am receiving the following error on the last line of The parameter is incorrect. (Exception from HRESULT: 0x80070057 (E_INVALIDARG)).
Why the code below is throwing this error? I have tried multiple variations of the code below to no avail and I'm sure this is something minor that I am overlooking. The title block definition under Drawing Resources is replaced with no errors, the title block on Sheet 1 is deleted just fine, but I can't seem to add a Title Block back in!
How Documents are defined:
Inventor._DrawingDocument oDoc = getDoc();Inventor.DrawingDocument sourceDoc =(Drawing Document) instance.Documents. OpenWith Options(sPath, options, false); Find, copy, replace: TitleBlockDefinition tBlock = sourceDoc.TitleBlockDefinitions[blockList.SelectedItem.ToString()]; TitleBlockDefinition newBlock = tBlock.CopyTo(oDoc, true); oDoc.Sheets[1].TitleBlock.Delete(); oDoc.Sheets[1].AddTitleBlock(newBlock);
