Any way to get a scale bar/title block text to reflect plotting at half size?
We use the common (24x36) sheet size for all projects, but when plotting we send out half size (12x18) as well. This means the scale bar reading 1"=40' is no longer correct. It should read 1"=20'. I would like to automate this.
I have a block that I want to show on a vertical exaggeration of 10x. How do I make it so that a block has a Y scale of 10 without the attribute text inside the block being stretched in the Y direction 10x?
I would like to use a Y scale of 10 rather than a block with 10x the length because I have a field that returns a length parameter and I don't want that value to be 10x what it's supposed to be, and it would make things much easier to not have to multiply my values by 10x each time I use the block.
i have created some dynamic title blocks with text attributes in title column. I have gone back an added some more attributes at a later date and these new ones will not move with my dynamic stretch! I have tried everything, modifying the action, re-doing the action, nothing works!
View 3 Replies View RelatedI am looking to create a dynamic block that changes in scale, ex. If I have two (2) viewports in paper space, one 1/4"=1'-0" the other 1/8"=1'-0" I want my blocks to appear to be the same size in paper space.
Also, I would like my blocks to change attributes/features ex. If I have a "light switch block" I would like to have the option of switching the block from a 3-way switch, 4-way switch etc.
I am in the process of fixing one of our dynamic blocks. It's a fairly simple fix where there was a typo in one of the names of our items in the lookup that needed to be fixed.
I changed the name of the item in the lookup table. I went and did the test block and it seemed to work fine, but when I bring the block into a drawing, it reverts back to the old lookup as if I did nothing at all.
I made sure that the path was correct and I even just dragged and dropped straight from Windows Explorer to no avail.Does AutoCAD keep referring to the old block? Did I forget to change something else?
Im wondering if there is a fast and atuomated way to insert a title block onto the layout tab throughout an existing project?
View 1 Replies View RelatedI have a dynamic block that contains both geometry as well as text. I don't want the geometry to scale up based on the drawing scale but I do want the text to scle according to the drawing scale. I have tried making the text both annotative and non-annotative in the block and get the same result. I can get the text to scale properly if I make the entire block annotative but that also scales the geometry which is not accurate.
View 1 Replies View RelatedI have a view title where I want to show Full scale and half scale on the same view title. Please see attached .rfa file.
Is there a way to have a label return a half size automatically in an effort to have only one view title. Otherwise our current work around is to make each view title for each scale and create a viewport for each scale in our template. I have heard that the labels are hardcoded and cannot be changed.
So I just recently upgraded from LT2005 to LT2009 and am having trouble creating a Dynamic Block.
I am trying to create a 6-sided polygon with a text attribute of either 1 or 2 digit numbers to be used as a hex note. The problem I am having is getting the text to be centered within the polygon and the correct text height.
I just learn about dynamic block. How to edit text inside dynamic block without using block editor. I want directly edit text inside.
View 1 Replies View RelatedI have imported a model from C4D using the FBX importer, and everything was fine, except that it was way to big. I scaled it down to a more "manageable" size. So the scale reads 0.01 (All axis).
My question is, is there any way I can make Scale reflect the actual object size? Maya know these numbers, because they are present when using the universal manipulator tool. I would like it if the scene scale could reflect the real size of the object. So if i create a new object, the size relates to the size of the existing objects in the scene?
Can i put the real scale on the object, and then just "downscale the scene", so that the objects don`t appear giant? Like scene scale or something?
I have created a bunch of templates (title block type drawings) for my company. In these templates there is a dynamic block used for a particular note. Based on customer number, this note will be changed.
We have a program that will insert the correct template based on the drawing type. It will know the customer number and change the dynamic block visibility state to reflect the correct text in the note.
Here's the problem; I don't know why, but sometimes the visibility state does not change. It's not the code as it works just fine in some drawings.
I've gone in and just changed the visibility state name, then changed it back, then saved the drawing and it worked. In some cases, I've also just gone into the template and deleted the dynamic block and re-inserted it, and it began to work again.
Having trouble with dynamic block visibility states not working when using an automated process?
I have tried to change the size of the text in the title block and in other places within a drawing, but the changes are ignored. They always come back to Tahoma 0.120"
Is this a bug in the program?
Inventor 2013 with the latest service packs, etc.
I really need to make some changes to the title block and making the text smaller is one of them.
I made what seems to be a very simple dynamic block with text attributes and a few grips attached to stretch and polar stretch actions, but the file size is about 2mb! This is huge... roughly the size of one of our firm's full floor plans. There seems to be nothing purgeable in the file, so I am wondering if this is just the size necessary for the functionality or if I am bloating this somehow.
View 5 Replies View RelatedThe title blocks that we use have prompted entries in them and I would like to find a way using iLogic to copy the entries from one title block to another within the same drawing; i.e.. if the user decides to change from an A2 to A1 drawing.
I already have an iLogic rule which allows the user to change the active border, title block and sheet size based on a form selection but would like it to capture the prompted entries already entered and re-use them after the change.
Is there a way to have VARIABLE text size AND BLOCK SIZE autocad 2012, for different scales sizes? To sum it up I am running 1/8th scale on some of the pages in the set with a 1/4 blow up section. I use addressable devices so it is a lot of work to change all the text Is there anything that will auto-update the text size per scale with out having to go through my drawing and repeat all the text and VPfreeze it?
View 9 Replies View RelatedI'm having issues with plotting. I have my page setup as 17 x 22 (Landscape) and am designating the plot area to plot extents. I am trying to plot to 22 x 34 (size "D" portrait). The current paper loaded is 22" in a HP Design jet T770. When I do a plot preview, the drawing looks correct. However, when it plots it trims off the top part of the drawing. I'm trying to figure out what is causing this. The drawing is orientated correctly when it comes out of the plotter so I know it's not a portrait/landscape issue.
I just tried plotting a 30 x 42 titleblock to the same size paper "D" portrait, and get the same problem. This happens if I use extents and window.
I made a 24 x 36 title block with attributes and saved it as a wblock.
1) When I inserted the title block into a 24 x 36 paper space, The titleblock does not fit. and the texts are messed up as well. The text are in in their respective places. What I did to create the title block is to basically created a title block border and then created the text. So, I made a block out of the borders and then a block out of the text then I made a block out of the whole thing (text and border). After i saved it as a wblock. When saving as wblock i chose entire drawing and once i chose object.
2) When I try to test plotting with this title block i made (even though it does not fit in) it does not show up in print preview.
How do I make some of the text Bold and others not? but keep them all same style?
So I've done a reasonable amount of work with dynamic blocks. I have a block with a rotation action and grip to arbitrarily align it. However I realized when trying to combine it with an alignment grip (which actions on the basic or fundamental block rotation angle) that there didn't seem to be a way to some how link a dynamic block rotation action or one of the custom angle properties to a the fundamental block rotation angle. Thus there are two additive rotations at work; the dynamic block one with its grip and the fundamental rotation property.
This can cause some confusion when one person aligns with the grip and another via rotating the block's fundamental property and would also be problematic in the generalized sense if one was trying to select or programmatically read back the net angle alignment.
I have a dynamic block, that represents a stirrup.
I inserted in the block a Block Propreties Table, that have some preset dimensions for the stirrups. The grip of this table I decided to put in the top right corner.
The problem is that I can't make this grip moveable )
See the attachement with the block
new to dynamic blocks but looking to streamline my wiring diagrams here and have created a block that shows the typical wire styles we use in a simple easy way. I now want to add an overall flip to the entire block and have not been able to find set this. I would prefer to use the same label and go from there. I have included the block to show what I mean. It is only working on the single visible item at the one time. I know this has to be possible just let me know what I am doing wrong. I am running AutoCad LT 2013
View 3 Replies View RelatedI need to create a dynamic block for a "Glass Panel" in a balustrade. I need to be able to insert it, in one corner and stretch it in another corner, to suit the staircase angle.
I've created the block, but it isn't working correctly. I've attached a drawing, with the left hand drawing a sketch of how it needs to be. The right hand drawing is my dynamic block attempt. As can be seen, when the block is stretched between the 2 points, it doesn't follow the angle of the staircase correctly (Very slight run off)
I wish to create a dynamic block containing some attributes. These attributes are inside rectangles that can't be modified in length using linear parameters ; but the attribute has to be always in the middle of the rectangle. So, I draw a line inside the rectangle (in a hidden layer) and insert the attribute with center justification (not sure for the translation) that I place in the middle of this line ; then I put a coincidence constraint (not sure for the translation, but it's the first one) linking the middle of the line with the middle of the attribute.
But here's the problem : when stretching my rectangle, the insertion point of the attribute suddenly changes from "center" to "bottom left".
I am looking for a way to use the ATTIN/ATTOUT workflow to bring in data from an excel spreadsheet to drive the size of each of my block's instances. The block will be simple, a rectangle, with width and length parameters. For each entity in my excel/csv file these parameter values are spelled out. I know how to display these parameters in my attributes, but I don't know how, if I were to feed in these values, to drive the geometry. If there's a better way to take a list of width and length values to generate a series of blocks each with a rectangle containing its respective size.
View 1 Replies View RelatedI need to do some repetitive task on a lot of dynamic blocks, unfortunately, when I open each file, AutoCAD keeps asking if I want to open it with the block editor.
Is there a way to disable that dialog and open the files as normal dwgs?
A hint: BLOCKEDITLOCK doesn't make it, it shows another dialog...
I'm trying to make a dynamic block of a column radiator.
It should be very simple. It's a 46mm wide module that comes in a range of heights (300, 500, 600, & 750mm) and a range of assembly widths (9, 13, 18, 22 & 27 modules wide - more commonly given as mm widths of 414, 598, 828, 1012 & 1242 respectively).
My attempt at constructing it has gone quite well, but when 'stretching' the block a ghost of the core 414 (w) x 300 (h) unit remains. I attach the block to give you a better idea of what I mean.
I have a drawing ("SURUBURI.dwg") with several dynamic blocks ("M12", "M16", "M18" ... an so on...). I want to insert in my current drawing, one of the blocks from SURUBURI.dwg, for instance the block named "M12".
For that i tried creating a new command "INSERT_M12" that has the following script :
^C^C-INSERT; "I:/Ionut Mihaila/Goodies/SURUBURI.dwg/M12"
Now obvious that doesn't work, but i think it shows clearly what i want to accomplish. So is there an other way to do this?
I'm working on a drawing and I want an action to work on two diffrent dynamic blocks.
In my case, I wish to have two blocks that I can rotate by one rotation grip.
How do I manage to work this out?
I have successfully created a dynamic block. I can insert it into AutoCAD, and it behaves like I want, except for one thing.
I can select the block and change it by taking a grippoint and place it at another position. So my block is e.q. stretched, just like I wanted.
But then. When I want to use the ordinary STRETCH command of AutoCAD, I can only stretch the insertion point of the block, but not the grippoints. Is there a way to set a grippoint to be select edable by commands like STRETCH.
I need to create a dynamic title block, so I can change the date on layout 1 and all the others change too.
View 5 Replies View RelatedI would like to create a "wave" dynamic block, see below...
It is made from wipeout.
Is it chance to make a similar?
If I make a list for the length (from 125 to 350), after can I make a table /list /summary where these size are shown?