i have created some dynamic title blocks with text attributes in title column. I have gone back an added some more attributes at a later date and these new ones will not move with my dynamic stretch! I have tried everything, modifying the action, re-doing the action, nothing works!
View 3 RepliesAny way to get a scale bar/title block text to reflect plotting at half size?
We use the common (24x36) sheet size for all projects, but when plotting we send out half size (12x18) as well. This means the scale bar reading 1"=40' is no longer correct. It should read 1"=20'. I would like to automate this.
I have searched high and low and still could not find a tutorial to really explain how to create a drawing title with attributes (Detail Number, Sheet Number, Detail Title, Detail Scale). All I find are on creating dynamic block, which I could achieve, but I need one for a block that has (or will have) attributes.
I was able to find a tutorial on attributed door numbers, but it does not work for drawing titles that has attributes. GOAL: I would like to have all my seven drawing titles in one file and to be able to stretch the leg of any selected title to a desired length.
The title blocks that we use have prompted entries in them and I would like to find a way using iLogic to copy the entries from one title block to another within the same drawing; i.e.. if the user decides to change from an A2 to A1 drawing.
I already have an iLogic rule which allows the user to change the active border, title block and sheet size based on a form selection but would like it to capture the prompted entries already entered and re-use them after the change.
I need to create a dynamic title block, so I can change the date on layout 1 and all the others change too.
View 5 Replies View RelatedIs it possible to increment text or attributes in a dynamic block? I'm want to create elevation text for grids that can start at a certain value and increment up or down from there.
View 1 Replies View RelatedI was curious to know if it is possible to flip the orientation of an attribute when using a mirror parameter. I would like to orient my text to the right when I flip it one way and to the left when I flip it the other way.
View 0 Replies View RelatedI made what seems to be a very simple dynamic block with text attributes and a few grips attached to stretch and polar stretch actions, but the file size is about 2mb! This is huge... roughly the size of one of our firm's full floor plans. There seems to be nothing purgeable in the file, so I am wondering if this is just the size necessary for the functionality or if I am bloating this somehow.
View 5 Replies View RelatedI need to create a new parameter in label text, (example: adress number 2), so I did it, but when I load it into the project, i cant write anything, its just a question mark.
View 2 Replies View RelatedWhat do I need: In the example I will mark attributes with underlined text, and simple text with bold text
(Position)numberDiamdiam
Diam= diameter symbol
In the model space, I enter values:
Position = 3
number = 15
diam = 12
I need to get:
(3)15Diam12
instead of
(3 )15 Diam12
Is it possible to make an Attribute, take as a "Position X" value, the "Text alignment X" from a text ?
I'm trying to make a dynamic block of a column radiator.
It should be very simple. It's a 46mm wide module that comes in a range of heights (300, 500, 600, & 750mm) and a range of assembly widths (9, 13, 18, 22 & 27 modules wide - more commonly given as mm widths of 414, 598, 828, 1012 & 1242 respectively).
My attempt at constructing it has gone quite well, but when 'stretching' the block a ghost of the core 414 (w) x 300 (h) unit remains. I attach the block to give you a better idea of what I mean.
how to create a title block that can be edited by double clicking on a block of text and then scrolling thru the list of each block of text.
View 1 Replies View RelatedI have just upgraded to 2012 and I am having a few issues with the title blocks I am creating. For some reason everytime I add attributes to the block they never come out in order. For example I create the title page, add the attributes using ATTDEF (job name etc) then I create the block and check my attributes using BATTORDER, I can arrange them using the up/down buttons which is fine. But as soon as I try to edit the attributes outside the block editor they are all out of order again! I have tried making the attributes in and outside of the block editor with no avail! And to make matters worse I have a jumpy mouse.
View 9 Replies View RelatedI was just notified I am supposed to show a small class how to make our company title blocks using attributes and what annotative scaling is and how to use it. videos or related forums so I can set up something to show tomorrow morning. We are going to be setting up our block library and setting up our title blocks. Should this be done using templates for each paper size?
View 2 Replies View RelatedI have a title block inside my drawing and i want to link my title on the title of the file itself, so that if the title of the file was change, it will be change also inside the drawing.
View 4 Replies View Relatedway I can link my AutoCAD title block attributes to excel and make changes in either excel or AutoCAD and then be able to run an update? The attributes would be “REV” “DWG_NO” “TITLE” “LOCATION” “DRAWING_SIZE” and “FILE NAME”.
View 4 Replies View RelatedWhat I need to know is, will the drawing sheets/titleblocks attributes etc, I have created to insert in AutoCAD work in Civils 3d or will i need to create separate ones.
View 4 Replies View RelatedI made a dynamic block with attributes. The block was to be moved using Linear parameter + move action, and then a lookup parameter and action.
The block moves as it is suppose to but the attributes are left behind. How can I get the attributes to move with the dynamic block?
The attribute properties are:
Verify = Yes.
Lock position: Yes or No don't seem to make a difference.
Is this a bug in AutoCAD or is there a solution to this?
My office is trying to create dynamic blocks with dynamic attributes. We have the dynamic blocks created. how to create the attributes
View 3 Replies View RelatedMy company has just upgraded to AutoCad MEP 2012 with Quickpen PD3D. I am trying to find out how to make a title block with attributes that will open in quickpen. I will have to use attributes to specify date, job, job#, etc.
View 0 Replies View RelatedI was given a customers title block but there are no defined attributes. I'm using AutoCad Electrical 2010. I have to double click on the title block and the edit block definition box pops up. I select the block to edit and click ok. I would like to use the enhanced attribute editor on these title blocks. Is there a way to define the attributes on this kind of title block using the enhanced attribute editor?
View 9 Replies View RelatedI have created fields in the drawing properties custom fields dialogue box, then inserted those fields into my title block attributes.
Two things I hope to get out of this:
1. link these fields into the drawing property summary, so that I can display the drawing title and other pieces of info in the help strings that appear in windows explorer by simply hovering the cursor over the file.
2. I wish to be able to fill out the information in the title block by data linking it to our drawing lists in access.
I wanted to get opinions on the most efficient way of creating & saving title blocks, with regards to using them in future projects.
1. Create a title block in model space then save it as a .dwt file
OR
2. Create a title block in model space then save it as a block
I can't imagine there's a right or wrong way, just wanted get your input. Chances are you all know something I don't.
In a drawing file customer wants to create 2 title block. both the title blocks should be added to the same drawing. At any point of time only one should be visible to the user. Basically users in one country will see first title block and users in another country will see second title block.
View 1 Replies View RelatedI would need to make a dynamic title block and I've tried alot of thing but can't find the solution.
I'll link my block here.
with the example I want in it.
symbole.dwg
Some of the projects I work on contain 50+ sheets, its very time consuming to alter the title block on each separate layout when either a new amendment is made or a new sheet is added etc. Is it possible to link these certain areas of the title block together so I can alter it on all layouts in one go? I thought about maybe using a dynamic block or just placing it in model space and having viewports in the appropriate area on the layouts?
View 9 Replies View RelatedI added a title to my movie but the title is showing up on random clips now.
View 1 Replies View RelatedAny method when in the Library module to quickly edit the Title and Caption per image without having to use the mouse to click in the Title box each time. For instance - my current workflow is a bunch of products with their own SKU titles. Usually I would follow this step:
1. Import images from Camera -> Lightroom
2. Open Library and click on first image, select the Title field and enter the SKU (for instance : HG4356)
3. Now I would click in Title and type in "PROFILE" or "TOP" or "SIDE"
4. I would then use the right hand key on the keyboard to move to the next image in my filmstrip and then have to use the mouse to click into the Title field again.
5. Once all these images are completey named, I select them all and then select Library -> Rename Photos and use the Title_Caption as my fields and rename all my files to the correct SKU names.
I can usually automate option 3 somewhat by selecting all the PROFILE views and doing a sync etc... but the SKU section gets a bit tedious when having to mouse click each time into the field. Ideally, I would like a "Naming" feature where it asks for the name, upon typing it in and pressing enter, it jumps to the next image, into the same field and you can start typing again.
I know its sounds a bit lazy - but when you have over a 1000+ images to rename - it does take its time - and anything to speed up this process.
So I have created a block witch is a pin out for a device with some attributes. I have created a dynamic block away so that I can have multiple pinouts on a device... how can I work it so that each element of the array has different attributes?
Output1, output2, output3 for example? but when i use the grip to give me another pin it allows me to do output4?
Right now I'm copying it from one file to the other... but I'm sure there is some other way. Are title blocks saved anywhere other than embebed in the file? Autodesk Product Design Suite 2012 Ultimate Autodesk Developer Network [URL]
View 9 Replies View RelatedI’ve been given a drawing with 3 drawings w/title blocks in Paper Space, REV A, B & C. A is on the left, B is in the middle and C is on the right. It appears somebody has been printing REV B as when I select print it jumps straight to that drawing.
How would I print REV A or C? I can do it now but I have to delete the other 2 drawings so it focuses on the only remaining drawing.