I have a dynamic block, that represents a stirrup.
I inserted in the block a Block Propreties Table, that have some preset dimensions for the stirrups. The grip of this table I decided to put in the top right corner.
The problem is that I can't make this grip moveable )
I just have a quick question (hopefully) about an activity I want a Dynamic block to perform.
I have a simple electric switch block (a line with an S over it), that in some cases is enclosed by a simple rectangle. When the switch is enclosed, I'd like the attribute to move further, to keep the spacing the same.
Is there a way to make the attribute move automatically with the display of the rectangle, maybe through some combination of Linear Move parameters, Visibility parameters, and a formula?
I have a couple of attributes suing fields within a block. But they don't update on opening. I need to do a manual field update to get them updated to the latest values.Tried various combinations of "fieldeval", but this was no good.
I "work in both worlds" It's somewhat important. (Windows at my "day job", Mac Student Ed for my University teaching.
I have an Annotative Associative block with attributes (TTFs). The Title attribute is multi-line. When the block used in a file that is opened in Windows, obvkously everything is fine. If that same drawing is opened in ACAD Mac, the position of the top attribute shifts and can't be corrected until the block is edited in Windows. (It has to be Windows because ACADmac can't edit associative blocks in this release.)
Process I used (MacBookPro 7,1): Start ACAD12win (Parallels 7 w/WinXP), used default ACAD.DWT.inserted block "Tag Drawing Title", accepted all attribute value defaults, accepted default annotation scale of 1:1save fileopened file in ACAD12mac (multi-line attribute in wrong position)save fileOpened again in ACAD12win, and multi-line attribute is still in wrong position. Save fileOpened again in ACAD12mac, and multi-line attribute is in a greater incorrect position.
I have a group of blocks, when I click the blocks I get the editable attribute pop-up box. I can now enter a text of my liking.
I have now made a dynamic block of these blocks, with a visibility states dropdown. So that only one block is shown at a time and when I need to change it I copy the block and use the dropdown button to select the one I need.
The problem I have is that the when I click the blocks from the dropdown only one of them allows me to use the editable attribute pop up window. The others say 'The selected block has no editable attributes'.
If I can't have multiple blocks with editable attributes in one dynamic block or if I can and have done something wrong.
I've attached the block so you can see what I mean. Single Socket allows editable attributes others wont.
I want to convert existing lighting blocks with attributes to a new dynamic block. I created a few visibility states but when i insert the block I can't move the attribute text around. I don't have to redefine the attributes within the block editor to make this work. What is the best way to deal with existing blocks with attributes?
So I have created a block witch is a pin out for a device with some attributes. I have created a dynamic block away so that I can have multiple pinouts on a device... how can I work it so that each element of the array has different attributes?
Output1, output2, output3 for example? but when i use the grip to give me another pin it allows me to do output4?
In "test" mode, this block works well except for the point of the arrow. If you stretch the line under the title, then move the arrow point to somewhere else, then flip it, the arrow point and its associated grip needs to stay put.
It actually does, the first time. BUT then if you move the arrow point again and flip it again, it does not.
Then, when I inserted it into another drawing, either with "insert" or via SSM, the flip doesn't stick to the point even the first time.
So I guess my question is how to flip it but keep the point where it happens to be when the flip occurs. Like a multileader, because what I am actually trying to create here is a multileader that has an annotative block with attribute fields, to be used with SSM.
I have dynamic block with visibility states and Lookups. I tried to add attribute (field with block reference property) which suppose to be updated according to Lookup. But it didn't happen Attribute still the same as first lookup props, but if I insert the block(pic1) and select another properties from the list (pic2-3), when open and close the block editor(4) - everything is ok. Is it possible to solve this problem?
So I've done a reasonable amount of work with dynamic blocks. I have a block with a rotation action and grip to arbitrarily align it. However I realized when trying to combine it with an alignment grip (which actions on the basic or fundamental block rotation angle) that there didn't seem to be a way to some how link a dynamic block rotation action or one of the custom angle properties to a the fundamental block rotation angle. Thus there are two additive rotations at work; the dynamic block one with its grip and the fundamental rotation property.
This can cause some confusion when one person aligns with the grip and another via rotating the block's fundamental property and would also be problematic in the generalized sense if one was trying to select or programmatically read back the net angle alignment.
new to dynamic blocks but looking to streamline my wiring diagrams here and have created a block that shows the typical wire styles we use in a simple easy way. I now want to add an overall flip to the entire block and have not been able to find set this. I would prefer to use the same label and go from there. I have included the block to show what I mean. It is only working on the single visible item at the one time. I know this has to be possible just let me know what I am doing wrong. I am running AutoCad LT 2013
I need to create a dynamic block for a "Glass Panel" in a balustrade. I need to be able to insert it, in one corner and stretch it in another corner, to suit the staircase angle.
I've created the block, but it isn't working correctly. I've attached a drawing, with the left hand drawing a sketch of how it needs to be. The right hand drawing is my dynamic block attempt. As can be seen, when the block is stretched between the 2 points, it doesn't follow the angle of the staircase correctly (Very slight run off)
I wish to create a dynamic block containing some attributes. These attributes are inside rectangles that can't be modified in length using linear parameters ; but the attribute has to be always in the middle of the rectangle. So, I draw a line inside the rectangle (in a hidden layer) and insert the attribute with center justification (not sure for the translation) that I place in the middle of this line ; then I put a coincidence constraint (not sure for the translation, but it's the first one) linking the middle of the line with the middle of the attribute.
But here's the problem : when stretching my rectangle, the insertion point of the attribute suddenly changes from "center" to "bottom left".
I am looking for a way to use the ATTIN/ATTOUT workflow to bring in data from an excel spreadsheet to drive the size of each of my block's instances. The block will be simple, a rectangle, with width and length parameters. For each entity in my excel/csv file these parameter values are spelled out. I know how to display these parameters in my attributes, but I don't know how, if I were to feed in these values, to drive the geometry. If there's a better way to take a list of width and length values to generate a series of blocks each with a rectangle containing its respective size.
I need to do some repetitive task on a lot of dynamic blocks, unfortunately, when I open each file, AutoCAD keeps asking if I want to open it with the block editor.
Is there a way to disable that dialog and open the files as normal dwgs?
A hint: BLOCKEDITLOCK doesn't make it, it shows another dialog...
I'm trying to make a dynamic block of a column radiator.
It should be very simple. It's a 46mm wide module that comes in a range of heights (300, 500, 600, & 750mm) and a range of assembly widths (9, 13, 18, 22 & 27 modules wide - more commonly given as mm widths of 414, 598, 828, 1012 & 1242 respectively).
My attempt at constructing it has gone quite well, but when 'stretching' the block a ghost of the core 414 (w) x 300 (h) unit remains. I attach the block to give you a better idea of what I mean.
I have a drawing ("SURUBURI.dwg") with several dynamic blocks ("M12", "M16", "M18" ... an so on...). I want to insert in my current drawing, one of the blocks from SURUBURI.dwg, for instance the block named "M12".
For that i tried creating a new command "INSERT_M12" that has the following script :
I have successfully created a dynamic block. I can insert it into AutoCAD, and it behaves like I want, except for one thing.
I can select the block and change it by taking a grippoint and place it at another position. So my block is e.q. stretched, just like I wanted.
But then. When I want to use the ordinary STRETCH command of AutoCAD, I can only stretch the insertion point of the block, but not the grippoints. Is there a way to set a grippoint to be select edable by commands like STRETCH.
Why the drawing title in my dynamic block will not scale up or down. The rest of the objects scale properly but just this the drawing title text attribute will not follow suit.
I tried adding position point and link, etc....I run out options and don't know how to fix this.
I have a dynamic block with several actions and parameters. There are three grip points. Two are visible. One appears when you move one of the other grips. If i insert or paste this block near my template, the X/Y basepoint stays near the template when i drag the block on the template with one of the other two grips.. When i print the drawing the basepoint stays visible and the scale on my printed drawing is not correct (smaller).
I am creating a dynamic block of a conveyor belt it has a set number of widths and needs to be stretchable in length, which I have managed to do. The motor is placed half way down the length of the conveyor and needs to stay centered
I know I need to use the move command and put in a factor of 0.5 somewhere, but I can't remember how to do it.
Is it possible to mirror a rotation within a dynamic block?
See the attached drawing. I am trying to have two rotations within a dynamic block, but only one grip. When the grip is rotated one half of the block rotates while the other half rotates in reverse. The resulting action would be much like the wings of a butterfly.
I have tried many different combinations of parameters, actions and constraints with no luck. The block in the attached file was as close as I could get. Have I reached the end of what AutoCAD is capable of?
I have a block of a roof screen. What i want to do is to stretch it & have the slats on the front & also the supports on the rear array @ different intervals. The slats on the front would array every 6-1/2" (The slats are 5-1/2" wide with a 1" gap). The supports array every 4'-0". I have tried to do this multiple ways with mixed results. How to get my desired outcome. I am enclosing my block.
Last week I opened the drawing and added some visibilty states etc. to the block.
Now when I open the block or insert it into another drawing for whatever reason the cursor or crosshairs stop at the edge of the block. And if you move towards the middle of the block where there isn't any lines etc. the cursor will move to that point until you hit another line then it will stop moving again.
I've been reading some other posts for different dynamic block topics/issues and read that everyone has problems when you get to higher numbers of visibility states, but when I edited last week I only added 7 states. Is that enough to make this happen? It sounds like everyone else that is having problems has far fewer visibility states than on the attached drawing.
