I have a couple of attributes suing fields within a block. But they don't update on opening. I need to do a manual field update to get them updated to the latest values.Tried various combinations of "fieldeval", but this was no good.
View 5 RepliesAttached drawing file. What I am after is the ability to be able to stretch the length and/or width and update the two feilds depending on the new distance. At the moment each time I specify the distance parameter as the object it works then when you close and test the block it just shows #### as if that object no longer exsits.
The second problem is i am trying to be able to stretch the comms rack width and to update the door to the rack (the dashed part of the block) to the same length as the width of the rack. Ie atm the rack and door is 600mm and 600mm if the width was updated to 800mm the door will also scale to the same. I attached example in white just below the block.
I created a dynamic block to represent a room in a floor plan. It displays the dimensions and area of the room and can be stretched. But it's defeating the whole point of being dynamic. The area won't update unless I do a regen.
I've seen comments blaming MTEXT for the problem, so I tried putting the area field in a line of TEXT or DTEXT. It still didn't update unless I did a regen.
Infrastructure DSP '14 / Product DSP '14 / Vault Professional 2014
Dell Precision T1650
Windows 7 Professional SP1 64-bit
Intel E3-1270 V2 3.5GHz / 32G RAM
Nvidia Quadro 2000, Driver 331.82
Space Navigator, Driver Version 6.17.7
I made a dynamic block with attributes. The block was to be moved using Linear parameter + move action, and then a lookup parameter and action.
The block moves as it is suppose to but the attributes are left behind. How can I get the attributes to move with the dynamic block?
The attribute properties are:
Verify = Yes.
Lock position: Yes or No don't seem to make a difference.
Is this a bug in AutoCAD or is there a solution to this?
I would like to change sub block from a visibility after setting it. Here an example of code to get the right visibility, I don't really know how to update a sub block by name or by handle(seems to change inside dynamic block).
Dim Block As AcadBlock
Dim BlockRef As AcadBlockReference
Dim DynEntBlock As AcadEntity
Dim DynObjRefH As IAcadBlockReference
[Code]........
I "work in both worlds" It's somewhat important. (Windows at my "day job", Mac Student Ed for my University teaching.
I have an Annotative Associative block with attributes (TTFs). The Title attribute is multi-line. When the block used in a file that is opened in Windows, obvkously everything is fine. If that same drawing is opened in ACAD Mac, the position of the top attribute shifts and can't be corrected until the block is edited in Windows. (It has to be Windows because ACADmac can't edit associative blocks in this release.)
Process I used (MacBookPro 7,1):
Start ACAD12win (Parallels 7 w/WinXP), used default ACAD.DWT.inserted block "Tag Drawing Title", accepted all attribute value defaults, accepted default annotation scale of 1:1save fileopened file in ACAD12mac (multi-line attribute in wrong position)save fileOpened again in ACAD12win, and multi-line attribute is still in wrong position. Save fileOpened again in ACAD12mac, and multi-line attribute is in a greater incorrect position.
I have a group of blocks, when I click the blocks I get the editable attribute pop-up box. I can now enter a text of my liking.
I have now made a dynamic block of these blocks, with a visibility states dropdown. So that only one block is shown at a time and when I need to change it I copy the block and use the dropdown button to select the one I need.
The problem I have is that the when I click the blocks from the dropdown only one of them allows me to use the editable attribute pop up window. The others say 'The selected block has no editable attributes'.
If I can't have multiple blocks with editable attributes in one dynamic block or if I can and have done something wrong.
I've attached the block so you can see what I mean. Single Socket allows editable attributes others wont.
I want to convert existing lighting blocks with attributes to a new dynamic block. I created a few visibility states but when i insert the block I can't move the attribute text around. I don't have to redefine the attributes within the block editor to make this work. What is the best way to deal with existing blocks with attributes?
View 4 Replies View RelatedWe have a new title block which now contains various fields to automatically populate the drawing number, number of sheets, issue etc. The problem we have is when we go to zoom all or extents on a layout tab it moves the layout to the right each time. If we only have one layout or we use a plain title block i.e. with no fields, the zoom works fine (layout stays put in the center). This is also true if we directly insert a field onto the layout - again no problems.
The cause of the problem only happens when a block containing a field is inserted onto the paper space of a layout and,there are multiple layouts containing blocks with fields.
I am trying to update blocks for a client. Each block has a line of text with the block name in it. I would like to automate these with a field so that if the block name changes or a new block is created from that one, then the field would update as well. I am running AutoCAD LT 2012 currently.
View 8 Replies View RelatedI made a dynamic block (REINF_ID) with attributes that i will use to determine the reinforcement of structural walls on elevations. I inserted an attribute called LIGN1 which will be visible and the other attributes such as DIA(bar diameter)-SPC(rebar spacing)-POSITION(rebar position) will be invisible.
Now, in the block editor i want to insert 3 fields in the LIGN1(visible) attribute default value that will link to other attributes in the same block. example: LIGN1 default = 25M(DIAattribute) @(text) 300(SPCattribute) EF(POSITIONattribute). When i insert my block in a dwg and i decide to modify the DIAMETER(invisible attribute) from 25M to 30M for example, I want the value in the LIGN1 attribute to update to show the new DIAMETER.
When I regen, it does not modify the attribute (LIGN1) 25M to 30M, it keeps the default value of the attribute (25M).
Is there a way that i can put a Field in a block that does not have a locked down specific item to look for? What i'm trying to do is have a block that contains a field linked to an object (Polyline) and read its length. My problem is that when you put a field in a block you have to define what it is looking for so if i select "Object" in the field its asking for that object while i'm in the block editor, is there any way to have it pause for user input so that i can select the object after the block has been inserted?
View 5 Replies View RelatedMy office is trying to create dynamic blocks with dynamic attributes. We have the dynamic blocks created. how to create the attributes
View 3 Replies View RelatedI am looking for a way to create a master list of construction notes then use blocks attributes with fields to link to that master list. That way if the master list changed the note bubbles would change as well.
Sheet sets are being used with this project but I can't think of a way to make it work with the existing sheet set technology.
I'm working in AutoCAD 2010 and I would like to make the process of creating 2D documentation easier and faster for myself and my collegues, but during the process I've hit a dead end.
I would like to use fiedds (or something simillar) to partly automate the creation of 2D documentation. We have sheets organized in a specific way and I would like to create a custom field for each of the categories (eg. drawing number, number of parts, designer...) that could be edited easily like the parameters or object properties can. Basically what I would like to do is create custom fields or some other object that can be edited from a list in AutoCAD and then automatically refreshed in text boxes. Is there a possibility to do something like that using fields or perhaps a different solution?
So I have created a block witch is a pin out for a device with some attributes. I have created a dynamic block away so that I can have multiple pinouts on a device... how can I work it so that each element of the array has different attributes?
Output1, output2, output3 for example? but when i use the grip to give me another pin it allows me to do output4?
I have a job where some one has manually written valves into the titleblock fileds that should be coming from sheetset manager is there a way to reinsert the titleblock and have the fields come back.
View 1 Replies View RelatedEvery time I try to update blocks with attributes of a given layout, this only updates the last active layout. example:
I have three layouts: Layout1, Layout2 and Layout3
layout of the three blocks I would need to update the reference but I can Layout1 default that always takes the last active layout. In the following paper space specific code, but as it would to tell a particular layout.
Private Sub UpdateAttributesInDatabase(ByVal db As Database, ByVal blockName As String, ByVal attbName As String, ByVal attbValue As String) Dim psId As ObjectId Dim tr As Transaction = db.TransactionManager.StartTransaction() Using tr Dim bt As BlockTable = DirectCast(tr.GetObject(db.BlockTableId, OpenMode.ForRead), BlockTable) psId = bt(BlockTableRecord.PaperSpace) tr.Commit() End Using UpdateAttributesInBlock(db, psId, blockName, attbName, attbValue) End Sub
I have dynamic block with visibility states and Lookups. I tried to add attribute (field with block reference property) which suppose to be updated according to Lookup. But it didn't happen Attribute still the same as first lookup props, but if I insert the block(pic1) and select another properties from the list (pic2-3), when open and close the block editor(4) - everything is ok. Is it possible to solve this problem?
View 9 Replies View RelatedI am trying to create a dynamic block with two attributes, a double grid head, when I add a stretch parameter to the head it only affects the first assigned attribute.
I have added a stretch parameter to each attribute and only the firt attribute will move. What are the rules with attributes in dynamic blocks, the only thing I found was I have to lock posistion for attributes to be affected by the paramter assigned by the dynamic block.
I'm trying to set up a dynamic block with an attribute/field within it that the user(s) edit using a lookup table.
I understand basically that a field must be created as the attribute that then references a lookup table with the inputs listed. However, I really do not know how to create a lookup that has custom information such as below:
Site: Unit Code
Site X 100
Site Y 200
Site Z 300
All I have seen explains how to create a lookup from an existing parameter (liner etc) and I don't seem able to create something specific to my requirements. I forgot add that I want the user to see "Site X", "Site Y" etc in the dropdown - but the attribute to reflect only the Unit Code.
I need to know if there is a way to link an attributed F-N bubble with qty's to the BOM. This is for electrical wiring diagrams for aircraft. So I have serveral part numbers to a BOM, but no real accurate way of finding total quantities other than manually going though the drawing.
View 2 Replies View RelatedI am trying to create an attribute that displays the product of an Area of an object in the block and the value of a different attribute. For instance, here is what makes up the dynamic block:
1 rectangle (with width and height parameters and stretch actions)
1 Attribute called "ForcePerSQIN" - the value of this is entered separately for every instance of the block by the user
1 Attribute called "Total Force"
In the "Total Force" attribute, I want to create a field that contains a formula to multiply the area of the rectangle (which I am able to obtain with no problems using the Area property of the rectangle object type) by the value of the "ForcePerSQIN" attribute, which is user-defined. The problem I have is that it appears as if the value of this attribute is treated as text and thus cannot be used in the calculation; I get ######.
Is there a way to make the "ForcePerSQIN" parameter treat the user-defined value as a number instead of text so that it can be used in the calculation? Or is there a better way to accomplish my ultimate goal?
So I've done a reasonable amount of work with dynamic blocks. I have a block with a rotation action and grip to arbitrarily align it. However I realized when trying to combine it with an alignment grip (which actions on the basic or fundamental block rotation angle) that there didn't seem to be a way to some how link a dynamic block rotation action or one of the custom angle properties to a the fundamental block rotation angle. Thus there are two additive rotations at work; the dynamic block one with its grip and the fundamental rotation property.
This can cause some confusion when one person aligns with the grip and another via rotating the block's fundamental property and would also be problematic in the generalized sense if one was trying to select or programmatically read back the net angle alignment.
I have a dynamic block, that represents a stirrup.
I inserted in the block a Block Propreties Table, that have some preset dimensions for the stirrups. The grip of this table I decided to put in the top right corner.
The problem is that I can't make this grip moveable )
See the attachement with the block
new to dynamic blocks but looking to streamline my wiring diagrams here and have created a block that shows the typical wire styles we use in a simple easy way. I now want to add an overall flip to the entire block and have not been able to find set this. I would prefer to use the same label and go from there. I have included the block to show what I mean. It is only working on the single visible item at the one time. I know this has to be possible just let me know what I am doing wrong. I am running AutoCad LT 2013
View 3 Replies View RelatedI need to create a dynamic block for a "Glass Panel" in a balustrade. I need to be able to insert it, in one corner and stretch it in another corner, to suit the staircase angle.
I've created the block, but it isn't working correctly. I've attached a drawing, with the left hand drawing a sketch of how it needs to be. The right hand drawing is my dynamic block attempt. As can be seen, when the block is stretched between the 2 points, it doesn't follow the angle of the staircase correctly (Very slight run off)
I wish to create a dynamic block containing some attributes. These attributes are inside rectangles that can't be modified in length using linear parameters ; but the attribute has to be always in the middle of the rectangle. So, I draw a line inside the rectangle (in a hidden layer) and insert the attribute with center justification (not sure for the translation) that I place in the middle of this line ; then I put a coincidence constraint (not sure for the translation, but it's the first one) linking the middle of the line with the middle of the attribute.
But here's the problem : when stretching my rectangle, the insertion point of the attribute suddenly changes from "center" to "bottom left".
I am looking for a way to use the ATTIN/ATTOUT workflow to bring in data from an excel spreadsheet to drive the size of each of my block's instances. The block will be simple, a rectangle, with width and length parameters. For each entity in my excel/csv file these parameter values are spelled out. I know how to display these parameters in my attributes, but I don't know how, if I were to feed in these values, to drive the geometry. If there's a better way to take a list of width and length values to generate a series of blocks each with a rectangle containing its respective size.
View 1 Replies View RelatedI need to do some repetitive task on a lot of dynamic blocks, unfortunately, when I open each file, AutoCAD keeps asking if I want to open it with the block editor.
Is there a way to disable that dialog and open the files as normal dwgs?
A hint: BLOCKEDITLOCK doesn't make it, it shows another dialog...
I'm trying to make a dynamic block of a column radiator.
It should be very simple. It's a 46mm wide module that comes in a range of heights (300, 500, 600, & 750mm) and a range of assembly widths (9, 13, 18, 22 & 27 modules wide - more commonly given as mm widths of 414, 598, 828, 1012 & 1242 respectively).
My attempt at constructing it has gone quite well, but when 'stretching' the block a ghost of the core 414 (w) x 300 (h) unit remains. I attach the block to give you a better idea of what I mean.