AutoCAD 2013 :: Dynamic Fields In Blocks?
Aug 29, 2012
Is there a way that i can put a Field in a block that does not have a locked down specific item to look for? What i'm trying to do is have a block that contains a field linked to an object (Polyline) and read its length. My problem is that when you put a field in a block you have to define what it is looking for so if i select "Object" in the field its asking for that object while i'm in the block editor, is there any way to have it pause for user input so that i can select the object after the block has been inserted?
View 5 Replies
ADVERTISEMENT
Aug 22, 2013
We have a new title block which now contains various fields to automatically populate the drawing number, number of sheets, issue etc. The problem we have is when we go to zoom all or extents on a layout tab it moves the layout to the right each time. If we only have one layout or we use a plain title block i.e. with no fields, the zoom works fine (layout stays put in the center). This is also true if we directly insert a field onto the layout - again no problems.
The cause of the problem only happens when a block containing a field is inserted onto the paper space of a layout and,there are multiple layouts containing blocks with fields.
View 6 Replies
View Related
Aug 31, 2012
I have a couple of attributes suing fields within a block. But they don't update on opening. I need to do a manual field update to get them updated to the latest values.Tried various combinations of "fieldeval", but this was no good.
View 5 Replies
View Related
May 2, 2013
I'm working in AutoCAD 2010 and I would like to make the process of creating 2D documentation easier and faster for myself and my collegues, but during the process I've hit a dead end.
I would like to use fiedds (or something simillar) to partly automate the creation of 2D documentation. We have sheets organized in a specific way and I would like to create a custom field for each of the categories (eg. drawing number, number of parts, designer...) that could be edited easily like the parameters or object properties can. Basically what I would like to do is create custom fields or some other object that can be edited from a list in AutoCAD and then automatically refreshed in text boxes. Is there a possibility to do something like that using fields or perhaps a different solution?
View 5 Replies
View Related
Apr 21, 2013
Attached drawing file. What I am after is the ability to be able to stretch the length and/or width and update the two feilds depending on the new distance. At the moment each time I specify the distance parameter as the object it works then when you close and test the block it just shows #### as if that object no longer exsits.
The second problem is i am trying to be able to stretch the comms rack width and to update the door to the rack (the dashed part of the block) to the same length as the width of the rack. Ie atm the rack and door is 600mm and 600mm if the width was updated to 800mm the door will also scale to the same. I attached example in white just below the block.
View 6 Replies
View Related
Mar 20, 2013
I created a dynamic block to represent a room in a floor plan. It displays the dimensions and area of the room and can be stretched. But it's defeating the whole point of being dynamic. The area won't update unless I do a regen.
I've seen comments blaming MTEXT for the problem, so I tried putting the area field in a line of TEXT or DTEXT. It still didn't update unless I did a regen.
Infrastructure DSP '14 / Product DSP '14 / Vault Professional 2014
Dell Precision T1650
Windows 7 Professional SP1 64-bit
Intel E3-1270 V2 3.5GHz / 32G RAM
Nvidia Quadro 2000, Driver 331.82
Space Navigator, Driver Version 6.17.7
View 9 Replies
View Related
Jan 24, 2013
I have opened an exported .dwg file from Vectorworks. I have been able to hide most items I wish to. My difficulty is that I have (what I think from reading and Youtube) is dynamic blocks (light instruments). They are on a layer that is turned off, yet they are still visible. I've played around in the block editor, but I really don't know what I'm doing. If need be I can delete the light instruments, but I'd rather not. If there is a command to hide all blocks? I tried to use the properties editor to change the color to white so they would disappear. That didn't work.
View 2 Replies
View Related
Mar 14, 2013
I have created a drawing border block for my users to insert into their drawings. Within the block there are dynamic blocks which have visibilty states. However when you insert the border block with the dynamic ones you can't do anything with them? Is there anyway of making the border 'flexible' or something so that it maintains the fact that it is a block with all the attributes but you can use the embedded dynamic ones. Other than the obvious edit block in place or block editor?
View 2 Replies
View Related
Dec 18, 2012
Is there a way I can create dynamic blocks that taper to a square point? I work with different styles of lattice towers and monopoles and I would like to create a dynamic block of a couple styles and have them taper with the correct scale.
View 1 Replies
View Related
Sep 27, 2012
I created a dynamic block that contains a quick leader. The problem I have is when I go to my layout views the leader in the block does not show up. If I edit the block, change the layer of the leader and save it then the leader will show up in viewports. Other parts of the block are on the same layer and show up, it is just the leader for some reason.
View 7 Replies
View Related
Dec 4, 2013
I am trying to update blocks for a client. Each block has a line of text with the block name in it. I would like to automate these with a field so that if the block name changes or a new block is created from that one, then the field would update as well. I am running AutoCAD LT 2012 currently.
View 8 Replies
View Related
May 12, 2013
Is it posiible to give the constrain for wipeout object in Dynamic Block.
View 3 Replies
View Related
Jan 22, 2013
My company just upgraded to 2013 from 2012, and we are having problems copying and moving dynamic blocks. As we try to re-insert the object(s) after using the copy or move command, they disappear from the screen. If we save the drawing and restart AutoCAD, the objects are there where we inserted them, but we cannot figure out how to make the objects reappear without restarting the program (Undo does not work).
The objects in question are dynamic blocks created with AutoCAD Civil3D 2012. We suspect this might have something to do with conflicts between the two different versions of AutoCAD but we're not sure. There are 5 or 6 of us who have this problem.
View 1 Replies
View Related
Feb 27, 2013
Dynamic blocks not working on one new office computer with AutoCAD 2013 - The problem seems mainly with the stretch feature. some features like flip and visibility states seem to work. The blocks are good, they work on other machines and on saved files from that computer.
We have tried doing a repair with the disk and updating with service pack 1.1.
Other computer have AutoCAD MEP 2013, but these are not MEP features.
I read an older post (2007) regarding the blocks not working due to the shortcut menus in drawing area no checked in the options, but that does not seem to be the issue.
View 4 Replies
View Related
May 5, 2010
I've made annotative blocks and I've made dynamic blocks... My intent is to integrate both but I can't find a way to move dynamic block parameters separately at different annotative scales.
In other words, if I insert an annotative dimension and add multiple scales I can move the dimension grips independently at each scale. If I insert a dynamic block I want to be able to use the dynamic block's action "grips" to do the same. However, with a dynamic block, if I move a stretch action at one annotation scale it moves the action at all annotation scales.
The attached file shows a simple example.
View 2 Replies
View Related
Sep 26, 2012
Is it possible to select visibilty states of a dynamic block in a drawing, for ex. to count how many of each visiblity are in a drawing?
Ex.:
I have a drawing of a big pile plan with al lot of various piles in there. I made one dynamic block of the pile in which i can select what kind of pile i want to have visible. Now i want to count how many of each pile is in the pile plan.
If all different piles would be different blocks i could easily count with 'Block Reference' in 'Quick Select', but i dont know how to do the same with a dynamic block (which has one block name only) and its different visibilities.
View 1 Replies
View Related
Jun 5, 2013
What I would like to do is find a way to use a dynamic block, which has already been created, and once I put in the proper length, speed, type of conveyor, etc., it will automatically update an excel spreadsheet, for example a power estimate, or cost estimate sheet. Is this possible, if so, what is the quickest, and easiest way to do this?
Also, what formula would I use in excel to link back to the DWG?
View 9 Replies
View Related
Aug 9, 2013
I created a library of Dynamic cabinets in AutoCAD LT 2013. I have tested them and used them in drawings. I just upgraded to 2104 and when I insert those same dynamic blocks into a drawing, the parameters do not show and i can not use the dynamic block as intended. when I click on it...tons ot grips show up and no parameters.
View 2 Replies
View Related
Nov 20, 2013
I am drawing a block that containes a number of other blocks which I want to control parametrically. For example. In one block, I have set the diameters of a circle restricted to 10 and 12-mm. I have a second block that also contains the circles which have similar restrictions. I now want to control the diameters of the circles from a single source - similar to shared parameters in Revit. Am I able to share a global parameter between blocks?
Eventually, I want to control a 2D drawing from a table only. Should I be using .Net or AutoLisp for this.
View 4 Replies
View Related
Mar 15, 2012
I have created a dynamic block with several visiblility states. The block works great for what I need it for. however, I am trying to add one more action to the block but am having issues.
This block is essentially a 24" retail cabinet with the visibility states showing the different drawer and shelf configurations. I want to be able to lengthen the cabinet in 24" increments and have the visibility show for each 24" section.....e.g. I want a 10' cabinet so I bring in the 24" starter block. Then stretch the cabinet to the 10' mark, then I can chose any drawer/shelve config for each 24" section (they are all different).
I can get the block to stretch in 24" sections....no problem.....i just want the visibility state to be duplicated as well for each section. Now as it stretches, there is only one Vis state and it only populates the first cabinet.
I could do this by copying the block over and over 5 times.....but I am hoping there is a way to make this dynamic.
View 7 Replies
View Related
Apr 23, 2013
I have a block I am making into a Dynamic Block. I will be adding in different visibility states. Depending on the visibility state the block would need to be inserted from a different point.
My question is, is it possible to add multiple insertion points to a dynamic block so depending on the visibility state it defaults to the correct insertion point?
View 2 Replies
View Related
May 1, 2012
Noticed that the Dynamic Blocks in the Annotation Tool Palette are missing? Let me rephrase that, in the Tool palette they show up, but the dwg's that they reference are missing. I have 4 users that are currently testing Civil 3D 2013 and all of them are missing the files.
I'm sure I could copy them from 2012, but still.
View 3 Replies
View Related
Sep 26, 2013
we have moved from AutoCAD MEP 2012 to AutoCAD 2014 recently using Dynamic blocks with multiple visibility states.
in 2012 we could select a dynamic block with a specific visibility state and select similar, it would only select the visibility state that was previously selected.
in 2014 that is no longer an option WTH?
i have tried a couple of system variables to no avail (pickadd, selectionmode)2014
selectionmode is not a valid SV in 2012
View 9 Replies
View Related
Sep 7, 2012
is there a way to make dynamic blocks stretchable similar to a mleader,
the blocks i create are only stretchable by grips, and not by crossing
(i am using linear or point parameter stretches)
View 2 Replies
View Related
Jun 1, 2006
Is there anyway to link standard AutoCAD Grips and there commands to Dynamic Block Actions? I want to stretch an arc by its midpoint grip. This accomplishes something that no other commands do.
View 4 Replies
View Related
Mar 22, 2013
So I've done a reasonable amount of work with dynamic blocks. I have a block with a rotation action and grip to arbitrarily align it. However I realized when trying to combine it with an alignment grip (which actions on the basic or fundamental block rotation angle) that there didn't seem to be a way to some how link a dynamic block rotation action or one of the custom angle properties to a the fundamental block rotation angle. Thus there are two additive rotations at work; the dynamic block one with its grip and the fundamental rotation property.
This can cause some confusion when one person aligns with the grip and another via rotating the block's fundamental property and would also be problematic in the generalized sense if one was trying to select or programmatically read back the net angle alignment.
View 2 Replies
View Related
Jun 13, 2013
I have a dynamic block, that represents a stirrup.
I inserted in the block a Block Propreties Table, that have some preset dimensions for the stirrups. The grip of this table I decided to put in the top right corner.
The problem is that I can't make this grip moveable )
See the attachement with the block
View 1 Replies
View Related
Jul 25, 2012
new to dynamic blocks but looking to streamline my wiring diagrams here and have created a block that shows the typical wire styles we use in a simple easy way. I now want to add an overall flip to the entire block and have not been able to find set this. I would prefer to use the same label and go from there. I have included the block to show what I mean. It is only working on the single visible item at the one time. I know this has to be possible just let me know what I am doing wrong. I am running AutoCad LT 2013
View 3 Replies
View Related
Feb 28, 2012
I need to create a dynamic block for a "Glass Panel" in a balustrade. I need to be able to insert it, in one corner and stretch it in another corner, to suit the staircase angle.
I've created the block, but it isn't working correctly. I've attached a drawing, with the left hand drawing a sketch of how it needs to be. The right hand drawing is my dynamic block attempt. As can be seen, when the block is stretched between the 2 points, it doesn't follow the angle of the staircase correctly (Very slight run off)
View 9 Replies
View Related
Nov 21, 2011
I wish to create a dynamic block containing some attributes. These attributes are inside rectangles that can't be modified in length using linear parameters ; but the attribute has to be always in the middle of the rectangle. So, I draw a line inside the rectangle (in a hidden layer) and insert the attribute with center justification (not sure for the translation) that I place in the middle of this line ; then I put a coincidence constraint (not sure for the translation, but it's the first one) linking the middle of the line with the middle of the attribute.
But here's the problem : when stretching my rectangle, the insertion point of the attribute suddenly changes from "center" to "bottom left".
View 2 Replies
View Related
Dec 4, 2013
I am looking for a way to use the ATTIN/ATTOUT workflow to bring in data from an excel spreadsheet to drive the size of each of my block's instances. The block will be simple, a rectangle, with width and length parameters. For each entity in my excel/csv file these parameter values are spelled out. I know how to display these parameters in my attributes, but I don't know how, if I were to feed in these values, to drive the geometry. If there's a better way to take a list of width and length values to generate a series of blocks each with a rectangle containing its respective size.
View 1 Replies
View Related
