My company just upgraded to 2013 from 2012, and we are having problems copying and moving dynamic blocks. As we try to re-insert the object(s) after using the copy or move command, they disappear from the screen. If we save the drawing and restart AutoCAD, the objects are there where we inserted them, but we cannot figure out how to make the objects reappear without restarting the program (Undo does not work).
The objects in question are dynamic blocks created with AutoCAD Civil3D 2012. We suspect this might have something to do with conflicts between the two different versions of AutoCAD but we're not sure. There are 5 or 6 of us who have this problem.
I have a dynamic block, that represents a stirrup.
I inserted in the block a Block Propreties Table, that have some preset dimensions for the stirrups. The grip of this table I decided to put in the top right corner.
The problem is that I can't make this grip moveable )
Drawing disappear after using a dynamic block's stretch parameter?
I’ve made fairly simple dynamic blocks with lines or leaders that can be stretched and some attribute text. After moving the stretch grip of the block the block will disappear. If I then do a regen the entire drawing disappears. But it seems to be only a graphical glitch based on the fact that I can then save the disappeared drawing, reopen it and everything is up to date. I can even see my devious little dynamic blocks. But of course if I try to edit them everything will disappear again.
I have a block containing a visibility parameter but the problem is when it is inserted, that visibility parameter is in a different place to where I put it in the block editor.
My geometry is around the 0,0 origin (which is also the base) and the visibility parameter was placed at 0,-25 in the block editor however once it is inserted in a drawing it shows up at 270,130.
No matter where I move it back to, it always reverts back to another position. Every time I try to change and reinsert, I purge the drawing so I know it is not picking up on something else.
I just have a quick question (hopefully) about an activity I want a Dynamic block to perform.
I have a simple electric switch block (a line with an S over it), that in some cases is enclosed by a simple rectangle. When the switch is enclosed, I'd like the attribute to move further, to keep the spacing the same.
Is there a way to make the attribute move automatically with the display of the rectangle, maybe through some combination of Linear Move parameters, Visibility parameters, and a formula?
The linear stretch works fine but changing the length affects the position of the tick marks of the polar stretch. If I change the degrees to 0-360 then it's not a problem but I want to restrict to 285-345 deg.
I can't figure out how to move the base angle of the polar stretch with the linear stretch.
In "test" mode, this block works well except for the point of the arrow. If you stretch the line under the title, then move the arrow point to somewhere else, then flip it, the arrow point and its associated grip needs to stay put.
It actually does, the first time. BUT then if you move the arrow point again and flip it again, it does not.
Then, when I inserted it into another drawing, either with "insert" or via SSM, the flip doesn't stick to the point even the first time.
So I guess my question is how to flip it but keep the point where it happens to be when the flip occurs. Like a multileader, because what I am actually trying to create here is a multileader that has an annotative block with attribute fields, to be used with SSM.
I have opened an exported .dwg file from Vectorworks. I have been able to hide most items I wish to. My difficulty is that I have (what I think from reading and Youtube) is dynamic blocks (light instruments). They are on a layer that is turned off, yet they are still visible. I've played around in the block editor, but I really don't know what I'm doing. If need be I can delete the light instruments, but I'd rather not. If there is a command to hide all blocks? I tried to use the properties editor to change the color to white so they would disappear. That didn't work.
I have created a drawing border block for my users to insert into their drawings. Within the block there are dynamic blocks which have visibilty states. However when you insert the border block with the dynamic ones you can't do anything with them? Is there anyway of making the border 'flexible' or something so that it maintains the fact that it is a block with all the attributes but you can use the embedded dynamic ones. Other than the obvious edit block in place or block editor?
Is there a way that i can put a Field in a block that does not have a locked down specific item to look for? What i'm trying to do is have a block that contains a field linked to an object (Polyline) and read its length. My problem is that when you put a field in a block you have to define what it is looking for so if i select "Object" in the field its asking for that object while i'm in the block editor, is there any way to have it pause for user input so that i can select the object after the block has been inserted?
Is there a way I can create dynamic blocks that taper to a square point? I work with different styles of lattice towers and monopoles and I would like to create a dynamic block of a couple styles and have them taper with the correct scale.
I created a dynamic block that contains a quick leader. The problem I have is when I go to my layout views the leader in the block does not show up. If I edit the block, change the layer of the leader and save it then the leader will show up in viewports. Other parts of the block are on the same layer and show up, it is just the leader for some reason.
Dynamic blocks not working on one new office computer with AutoCAD 2013 - The problem seems mainly with the stretch feature. some features like flip and visibility states seem to work. The blocks are good, they work on other machines and on saved files from that computer.
We have tried doing a repair with the disk and updating with service pack 1.1.
Other computer have AutoCAD MEP 2013, but these are not MEP features.
I read an older post (2007) regarding the blocks not working due to the shortcut menus in drawing area no checked in the options, but that does not seem to be the issue.
I've made annotative blocks and I've made dynamic blocks... My intent is to integrate both but I can't find a way to move dynamic block parameters separately at different annotative scales.
In other words, if I insert an annotative dimension and add multiple scales I can move the dimension grips independently at each scale. If I insert a dynamic block I want to be able to use the dynamic block's action "grips" to do the same. However, with a dynamic block, if I move a stretch action at one annotation scale it moves the action at all annotation scales.
Is it possible to select visibilty states of a dynamic block in a drawing, for ex. to count how many of each visiblity are in a drawing?
Ex.:
I have a drawing of a big pile plan with al lot of various piles in there. I made one dynamic block of the pile in which i can select what kind of pile i want to have visible. Now i want to count how many of each pile is in the pile plan.
If all different piles would be different blocks i could easily count with 'Block Reference' in 'Quick Select', but i dont know how to do the same with a dynamic block (which has one block name only) and its different visibilities.
What I would like to do is find a way to use a dynamic block, which has already been created, and once I put in the proper length, speed, type of conveyor, etc., it will automatically update an excel spreadsheet, for example a power estimate, or cost estimate sheet. Is this possible, if so, what is the quickest, and easiest way to do this?
Also, what formula would I use in excel to link back to the DWG?
I created a library of Dynamic cabinets in AutoCAD LT 2013. I have tested them and used them in drawings. I just upgraded to 2104 and when I insert those same dynamic blocks into a drawing, the parameters do not show and i can not use the dynamic block as intended. when I click on it...tons ot grips show up and no parameters.
I am drawing a block that containes a number of other blocks which I want to control parametrically. For example. In one block, I have set the diameters of a circle restricted to 10 and 12-mm. I have a second block that also contains the circles which have similar restrictions. I now want to control the diameters of the circles from a single source - similar to shared parameters in Revit. Am I able to share a global parameter between blocks?
Eventually, I want to control a 2D drawing from a table only. Should I be using .Net or AutoLisp for this.
I have created a dynamic block with several visiblility states. The block works great for what I need it for. however, I am trying to add one more action to the block but am having issues.
This block is essentially a 24" retail cabinet with the visibility states showing the different drawer and shelf configurations. I want to be able to lengthen the cabinet in 24" increments and have the visibility show for each 24" section.....e.g. I want a 10' cabinet so I bring in the 24" starter block. Then stretch the cabinet to the 10' mark, then I can chose any drawer/shelve config for each 24" section (they are all different).
I can get the block to stretch in 24" sections....no problem.....i just want the visibility state to be duplicated as well for each section. Now as it stretches, there is only one Vis state and it only populates the first cabinet.
I could do this by copying the block over and over 5 times.....but I am hoping there is a way to make this dynamic.
I have a block I am making into a Dynamic Block. I will be adding in different visibility states. Depending on the visibility state the block would need to be inserted from a different point.
My question is, is it possible to add multiple insertion points to a dynamic block so depending on the visibility state it defaults to the correct insertion point?
Noticed that the Dynamic Blocks in the Annotation Tool Palette are missing? Let me rephrase that, in the Tool palette they show up, but the dwg's that they reference are missing. I have 4 users that are currently testing Civil 3D 2013 and all of them are missing the files.
we have moved from AutoCAD MEP 2012 to AutoCAD 2014 recently using Dynamic blocks with multiple visibility states.
in 2012 we could select a dynamic block with a specific visibility state and select similar, it would only select the visibility state that was previously selected.
in 2014 that is no longer an option WTH?
i have tried a couple of system variables to no avail (pickadd, selectionmode)2014
Is there anyway to link standard AutoCAD Grips and there commands to Dynamic Block Actions? I want to stretch an arc by its midpoint grip. This accomplishes something that no other commands do.
When moving the cursor over the drawing, it moves freely and the precision of the coordinates are still working to 4 decimal places. However, when I pick an object to move or copy and then try to move or copy it, the coordinate precision settings are changing to 0 decimal places and I'm unable to move things to exactly where I want - I can only move on a mm by mm basis. How do I return the precision settings of the coordinates back to 4 decimal places so I can move / copy objects without the current constraint I'm experiencing?
So I've done a reasonable amount of work with dynamic blocks. I have a block with a rotation action and grip to arbitrarily align it. However I realized when trying to combine it with an alignment grip (which actions on the basic or fundamental block rotation angle) that there didn't seem to be a way to some how link a dynamic block rotation action or one of the custom angle properties to a the fundamental block rotation angle. Thus there are two additive rotations at work; the dynamic block one with its grip and the fundamental rotation property.
This can cause some confusion when one person aligns with the grip and another via rotating the block's fundamental property and would also be problematic in the generalized sense if one was trying to select or programmatically read back the net angle alignment.
new to dynamic blocks but looking to streamline my wiring diagrams here and have created a block that shows the typical wire styles we use in a simple easy way. I now want to add an overall flip to the entire block and have not been able to find set this. I would prefer to use the same label and go from there. I have included the block to show what I mean. It is only working on the single visible item at the one time. I know this has to be possible just let me know what I am doing wrong. I am running AutoCad LT 2013
