AutoCAD Civil 3D :: When Copying Or Editing Dynamic Blocks Drawing Disappears
May 24, 2012
Drawing disappear after using a dynamic block's stretch parameter?
I’ve made fairly simple dynamic blocks with lines or leaders that can be stretched and some attribute text. After moving the stretch grip of the block the block will disappear. If I then do a regen the entire drawing disappears. But it seems to be only a graphical glitch based on the fact that I can then save the disappeared drawing, reopen it and everything is up to date. I can even see my devious little dynamic blocks. But of course if I try to edit them everything will disappear again.
View 4 Replies
ADVERTISEMENT
May 18, 2011
Is there a reason why my dynamic blocks are changing back to the defaut visibility when i copy the blocks from one file to another?
View 3 Replies
View Related
Jan 22, 2013
My company just upgraded to 2013 from 2012, and we are having problems copying and moving dynamic blocks. As we try to re-insert the object(s) after using the copy or move command, they disappear from the screen. If we save the drawing and restart AutoCAD, the objects are there where we inserted them, but we cannot figure out how to make the objects reappear without restarting the program (Undo does not work).
The objects in question are dynamic blocks created with AutoCAD Civil3D 2012. We suspect this might have something to do with conflicts between the two different versions of AutoCAD but we're not sure. There are 5 or 6 of us who have this problem.
View 1 Replies
View Related
Aug 8, 2013
How to find no of times specific blocks used in a drawing?
View 9 Replies
View Related
Jul 15, 2011
How do I manipulate a height parameter all of the dynamic blocks in the drawing from one single field? Say a field located in the drawing properties or on the drawing itself.
For example: Multiple blocks of different walls of same height with other blocks of things on located on those walls, dependant on the wall height, all linked to and changed by a single field. Possibly a Wall Height field located in the custom tab of the drawing properties.
I can pickout each of the blocks and change them at the same time in properites menu because they all share the same parameter name. I would just like to have that height parameter of every block in the drawing, that has that specific parameter controled by a single field. Which I could enter a new height at anytime that would change every block in the drawing to that height.
View 1 Replies
View Related
Sep 24, 2012
making dynamics blocks and more over utilizing the attribute feature but I have discovered some chnages tat i need to make.
My question right now is, once an attribute is created and put into the block editor is that it? Ifi need to edit it can i edit it? I don't really see an option or command right off that would allow me to do this ?
View 1 Replies
View Related
Apr 18, 2012
I received some outsourcing drawings which include this block. All time if I try do some edits in block editor size of this block changed. Also if you reset this block, size changed. What is wrong with this block?
View 1 Replies
View Related
May 2, 2013
I'm working in AutoCAD 2010 and I would like to make the process of creating 2D documentation easier and faster for myself and my collegues, but during the process I've hit a dead end.
I would like to use fiedds (or something simillar) to partly automate the creation of 2D documentation. We have sheets organized in a specific way and I would like to create a custom field for each of the categories (eg. drawing number, number of parts, designer...) that could be edited easily like the parameters or object properties can. Basically what I would like to do is create custom fields or some other object that can be edited from a list in AutoCAD and then automatically refreshed in text boxes. Is there a possibility to do something like that using fields or perhaps a different solution?
View 5 Replies
View Related
Oct 15, 2013
I have a very simple dynamic block that works when I test it in the editor but refuses to work when inserted into a drawing. I am not a newbie to dynamic block creation/editing, but it has been a long time since I have had to create one and this has got me stumped.
Is it possible that my employer has somehow blocked the use of dynamic blocks in drawings?
View 3 Replies
View Related
Dec 30, 2013
I created a dynamic block table and I try to insert into a drawing, however, it doesn't work, all block data are gone.
View 4 Replies
View Related
Jun 27, 2013
I produce windows and doors. and I reproduce the same drawing in the attachment a lot.
Is there a way to make it a dynamic block where I change the three dimensions in the drawing and the whole thing grows or shrinks symmetrically and proportionally?
View 9 Replies
View Related
Oct 17, 2011
I am trying to insert a block into a drawing that uses dynamic blocks. I want the block to be associated to the dynamic block, so that when I alter a linear stretch parameter on the dynamic block it moves the other block.
I am probably missing something obvious, but have now googled my mind into a numb state and can't make any more progress.
View 3 Replies
View Related
May 30, 2008
Quick one on Dynamic blocks.... we are using Dynamic blocks more and more as a company, we are finding that when in a drawing which contains lots of dynamic blocks, then go into Dynamic Block Editor - amend the block - Then when closing the block Editor to get back into the drawing the drawing goes really slow untill we close it down and restart it.
Is there a setting we need to change OR is there something obvious that we are missing. i.e should we be minimizing the amount of dynamic blocks in our drawings or uncomplicate them?
View 5 Replies
View Related
Jul 14, 2011
I have a dynamic block that contains both geometry as well as text. I don't want the geometry to scale up based on the drawing scale but I do want the text to scle according to the drawing scale. I have tried making the text both annotative and non-annotative in the block and get the same result. I can get the text to scale properly if I make the entire block annotative but that also scales the geometry which is not accurate.
View 1 Replies
View Related
May 5, 2010
I've made annotative blocks and I've made dynamic blocks... My intent is to integrate both but I can't find a way to move dynamic block parameters separately at different annotative scales.
In other words, if I insert an annotative dimension and add multiple scales I can move the dimension grips independently at each scale. If I insert a dynamic block I want to be able to use the dynamic block's action "grips" to do the same. However, with a dynamic block, if I move a stretch action at one annotation scale it moves the action at all annotation scales.
The attached file shows a simple example.
View 2 Replies
View Related
Jan 12, 2012
why I can't export the "Distance 1" attribute out of thsi drawing using the ATTOUT command. I need to build a series of constrained drawings using Dynamic blocks so I can send info from an Excel spreadsheet back and forth bewteen a drawing. I think I'll have to buy a 3rd party utility for that but for now, how to simply get the info out of ACAD and into Excel thsat would be a great start.
View 2 Replies
View Related
Nov 10, 2012
Is it possible to contol the visibility state of an external referenced drawing? I have an architectural plan drawing that uses a titlesheet drawing as an external reference. In my civil plan i want to use a different title sheet. Instead of having a different titlesheet drawing for the civil drawing i was wondering if i could turn my titlesheet drawing into a dynamic block. In my architectural drawing i would see visibility state #1 & in my civil drawing i would see visibility state #2.
View 1 Replies
View Related
May 5, 2009
I created a Dynamic Block that works perfectly, however when I try to add it to my tool pallet, I get an error message that reads "Block XXX is not found in source drawing. If the source drawing is currently open in the editor please save your drawing."
I'm not in the block editor, and I've saved it multiple times before I tried doing this. I've even closed AutoCAD and reopened it and I'm still getting the same results. I've been able to add many other blocks to my tool pallet, but it just will not accept this one.
View 4 Replies
View Related
Mar 15, 2012
I have created a dynamic block with several visiblility states. The block works great for what I need it for. however, I am trying to add one more action to the block but am having issues.
This block is essentially a 24" retail cabinet with the visibility states showing the different drawer and shelf configurations. I want to be able to lengthen the cabinet in 24" increments and have the visibility show for each 24" section.....e.g. I want a 10' cabinet so I bring in the 24" starter block. Then stretch the cabinet to the 10' mark, then I can chose any drawer/shelve config for each 24" section (they are all different).
I can get the block to stretch in 24" sections....no problem.....i just want the visibility state to be duplicated as well for each section. Now as it stretches, there is only one Vis state and it only populates the first cabinet.
I could do this by copying the block over and over 5 times.....but I am hoping there is a way to make this dynamic.
View 7 Replies
View Related
Apr 23, 2013
I have a block I am making into a Dynamic Block. I will be adding in different visibility states. Depending on the visibility state the block would need to be inserted from a different point.
My question is, is it possible to add multiple insertion points to a dynamic block so depending on the visibility state it defaults to the correct insertion point?
View 2 Replies
View Related
May 20, 2013
How can I copy a profile view style from one drawing to another? I can't seem to locate the ones I created in toolspace to be able to drag them from one drawing to another.
View 2 Replies
View Related
Feb 24, 2012
I've created my first dynamic blocks...but when i insert them into my dwg they are way off in space. i've tried selecting a base point in the library file. and i've tried using INSBASE 0,0,0 but no luck. my dyn block is made up of several individual blocks.
using: civil 3D 2011
View 5 Replies
View Related
Nov 21, 2013
I am labeling my pipe network structures and I was trying to create a label with a dynamic block. I want to have an octagon with text that I can change. So when I label INLET 1 I will have the information I need plus a symbol that corresponds to it.
AutoCAD Civil 3D 2012 SP4
Windows 7 (64)
View 3 Replies
View Related
Aug 25, 2013
Taking existing blocks and converting them to dynamic blocks.? This will save a lot of time.
If this is not possible to do then where the instructions are for creating dynamic block in version 2012.
View 6 Replies
View Related
May 14, 2013
I am using AutoCAD Civil 3D 2013. I am thinking that this may not be possible at this point but I am still going to try. I have an alignment label style for station and offset. I also have created a dynamic block for the border of this label to put around that label. This call out border is not a typical single width border so the borders within the alignment style do not match and cannot be used for our designs. I have attached an image of the border around the label style for a random alignment. So far the dynamic block has been a great fix for the border so that we dont spend a lot of time drawing in these borders for each label, but I was trying to add this dynamic block to the label style so that it would act as the border.
So far I have tried adding the block as a component in the layout tab of the label style but it appears where I anchor it and does not access any of the dynamic attributes to make the callout box larger in reference to the text. I know I can insert it so that in general it will be surrounding the Station, Offset, and Alignment contents, however, we frequently add additional text to our labels to callout pipe bends and other items so the box is not typically the same size.
How I might be able to do this or if it is not possible at this time?
View 1 Replies
View Related
Mar 22, 2013
I've begun to create tool palettes to organize my blocks and often-used items. I have no trouble creating the tool palette, inserting regular blocks, export/import of the tool palette and groups, however my problem involves Dynamic Blocks and the fact that I keep each seperate dynamic block in a different file. I do this so that I can easily insert the block into a new drawing.
I'm able to drag the dwg file onto the palette (from explorer to autocad) just fine, that way the block's reference in the palette is the original file. Although when I take this method, I don't gain the lighting bolt to signify a dynamic block.
To get the lighting bolt I insert the block into an empty drawing, save it, then drag the block over to the palette. The problem with this is that the tool palette references the saved blank drawing, not the original block's file.
My endgame is to have a tool palette that contains my dynamic blocks and that will be eventually exported/imported to other computers everytime there is a major change. I also want to be able to change the original block's file and have that change be reflected in the tool palette.
View 9 Replies
View Related
May 1, 2012
Noticed that the Dynamic Blocks in the Annotation Tool Palette are missing? Let me rephrase that, in the Tool palette they show up, but the dwg's that they reference are missing. I have 4 users that are currently testing Civil 3D 2013 and all of them are missing the files.
I'm sure I could copy them from 2012, but still.
View 3 Replies
View Related
Sep 7, 2012
is there a way to make dynamic blocks stretchable similar to a mleader,
the blocks i create are only stretchable by grips, and not by crossing
(i am using linear or point parameter stretches)
View 2 Replies
View Related
Jun 1, 2006
Is there anyway to link standard AutoCAD Grips and there commands to Dynamic Block Actions? I want to stretch an arc by its midpoint grip. This accomplishes something that no other commands do.
View 4 Replies
View Related
Apr 17, 2013
I am hoping to link text items between pages and items in the drawing such as elevations?
So, ideally, I would have a front page to my drawing set, and this would have a 'Contents' type table on it, with the title name of each drawing in one column, then the drawing number in the next column. This is the tricky bit, someone must know: If i was to change the name / number of any item in this table, could it change also (linked to) the following items:
Drawing title (as a text idem on the layout sheet that that drawing relates to)
Drawing number (as a text idem on the layout sheet that that drawing relates to)
Elevation call-out (on the plan view)
And possibly:
Excel reference cell
Drawing layout tab title (this might be pushing it!!)
Perhaps this could be done by linking to an external Excel spreadsheet with these titles modified in there? I'm not sure. This would be ideal as typing into excel is a lot easier than the triple click text modify method required currently.
I waste a lot of time renaming and updating sheet names / titles / numbers. Are there standard templates for drawing sets that may have this built in available anywhere that I could try?
View 7 Replies
View Related
Mar 28, 2011
My drawing- block is a little bit complicated, it contains few actions and parameters and everytime i open block editor to add, or to modify some action I can't see my drawing because actions grips and parameters grips obscure my drawing. I tried to refresh layout but it doesn't work.
please take a look on attached jpg.
View 1 Replies
View Related
