In a drawing file customer wants to create 2 title block. both the title blocks should be added to the same drawing. At any point of time only one should be visible to the user. Basically users in one country will see first title block and users in another country will see second title block.
i have created some dynamic title blocks with text attributes in title column. I have gone back an added some more attributes at a later date and these new ones will not move with my dynamic stretch! I have tried everything, modifying the action, re-doing the action, nothing works!
The title blocks that we use have prompted entries in them and I would like to find a way using iLogic to copy the entries from one title block to another within the same drawing; i.e.. if the user decides to change from an A2 to A1 drawing.
I already have an iLogic rule which allows the user to change the active border, title block and sheet size based on a form selection but would like it to capture the prompted entries already entered and re-use them after the change.
Right now I'm copying it from one file to the other... but I'm sure there is some other way. Are title blocks saved anywhere other than embebed in the file? Autodesk Product Design Suite 2012 Ultimate Autodesk Developer Network [URL]
I’ve been given a drawing with 3 drawings w/title blocks in Paper Space, REV A, B & C. A is on the left, B is in the middle and C is on the right. It appears somebody has been printing REV B as when I select print it jumps straight to that drawing.
How would I print REV A or C? I can do it now but I have to delete the other 2 drawings so it focuses on the only remaining drawing.
When I start the layoutwizard and proceed to the insert title block the only choice I have is none. I have several title blocks created and cannot remember where to tell Cad to look. I just setup a new PC and installed AutoCad 2011.
I need to insert two different (separate) title blocks into my idw drawings so both show on the drawing. One is the real Title block, and one is a Revision History block. I have listed them as Title blocks under Drawing Resources, but Inventor won't allow me to insert both. Is there any way round this?
I do not want the Revision History block as a Symbol.
Inventor 2011; MS Windows 7-64; i5-2500; 8Gb; GF550Ti.
I have trouble modifying the title blocks for the map book templates . Is there a specific folder that I need to save the adjusted title block in. Going through the block editor doesn’t work so I’m exploding the block and once I do that the links have been broken between the title block and map books.
Have more than one drawing template? (we use A and B size sheets)
My questions concerns, metric vs imperial A vs B vs C etc etc drawing sheet size title block does not scale down accordingly when change sheet size within an existing drawing template.
Is it possible to have one drawing template that can be toggle imperial vs metric, and then sheet size selected and then the title block scaled down or up accordingly? (I would assume this could be done using iLogic)
Or is it normal to have different drawing templates for sizes and units?
Im trying to make a small tool that i can share with other users that allows at the click of a button, a form to give options for titles & borders. Im pretty good with VBA but new to Inventor objects. The tool itself will change all of the borders & title blocks in multiple sheets to the selects ones on the form in one go.
I have the code set up to loop through the sheets and delete / replace all borders & title blocks and this works great. Im trying to find how i can loop through the borders & title blocks so that i can get them into a combo box for each. I cant find anything about this on the internet.
I'm trying to insert our company logo (a DXF file) into the a title block definition however the insertion point seems to default to 0,0.How can I insert it with a user defined insertion point?
You will see from the attached screen snipe what I mean about being forced to insert it at the 0,0, coordinates. I'd like to insert it into clear space then scale it and move it into replace the existing logo.
I need to load a couple hundred drawings to Vault. Most, if not all, of these AutoCAD drawings use the 'smart title block' and I was wondering if there was a way to extract all the data from the title blocks into an excel .csv file to then be imported into Vault saving me SOOOO much time and work.
How to manage adding titleblocks to sheets. On my last few projects I had x-ref'd in a titleblock which contained all of the generic info that was consistent throughout the whole sheet set. Then I created a block that I inserted into each sheet that I could edit and make sheet specific.
While this works, once you have insertion points correct, I was thinking about instead making the generic part of the titleblock a block also. My concern is that as I have revisions, the generic block that I would update would not "ripple" through the whole set quite like it did when I was x-refing it in.
I can't for some reason get this rule to work, simply want to be able to choose what title block to use.
I created a text parameter with the multi-values: TES ELE and TES EQU
I have 2 title blocks in my template called TES ELE and TES EQU
Here is my code, basically, I want to rule to apply the title block based on the selection, which will be done on a form.
If Title = "TES ELE" ThenActiveSheet.TitleBlock = "TES ELE"ElseIf Title = "TES EQU" ThenActiveSheet.TitleBlock = "TES EQU"End IfInventorVb.DocumentUpdate()ThisApplication.ActiveView.Fit
I have found many threads in this forum and have used their solutions for this rule, but for some reason, my rule will not select the title block and place it in the drawing.
Here is a snap of my set-up and my template file is attached
I was wondering if it is possible to make adjustments to tittle blocks across multiple drawings.
Such as changing a Rev A to a Rev B
I have to update about a hundred drawings and was wondering if there is some sort of Macro that I can use to do this without manually going into each one.
I am trying to map values to my title block using an autolisp routine. I have entered (getenv "NEXTSHEET") & (getenv "PREVSHEET") into the descriptions fields and mapped these routines to 'NEXT_ATTRNAME' & 'PREV_ATTRNAME' attributes. When I run the title block updates no values appear on my drawing. Please note that I have included the program in my start-up suite. Please also note that when I enter 'NEXTSHEET' or 'PREVSHEET' on the command line, the routines are called and the correct values are shown on the command line. I just need these values to be visible on my drawing. I have attached the Autolisp routine that I am running.
I am trying to create an iLogic (or VB) rule to update an active drawing title blocks from our Template File.I don't want to use any of the external software (Transfer Wizard etc), we just need a simple rule that will update the title blocks when we need to.
I am trying to update the text in the idw title block externally via excel or ilogic. I know of the iproperty of the part or the iam and that being able to be incorporated in the idw title block. But is there any way of linking an excel file to the idw so once the excel file is changed it updates all the idw title blocks it references?
ideas on Drawing Revision Table / Record on Title Blocks that they would share?We are re-designing our Title Blocks and I was wondering if there was a different or better way of doing this, besides a static block with attributes.
In fact, some of the things I've found online refer that you cannot automatically replace entire Titleblock Templates for existing Sheets in the Sheet Set Manager. So, here's my question:
Can you replace all existing Sheets in a Sheet Set with an entirely new Template file automatically, without opening each Sheet and re-inserting the Title block?
Example: Let's say I have a Sheet Set. Inside the Sheet Set, I already have 20 sheets created. I then realize that my Template file is missing our company logo. I then have to open the Template file and insert my company logo. Well, this works for all newly created sheets from that point forward, but how can I get this change to automatically populate in the existing 20 Sheets that are already in the Sheet Set?
I need to insert a Key Plan as a small part in my title blocks. I have a key plan ready in my model section. I did tried to play around in the block editor but could not find anything useful. I wish I could insert the key plan like viewport in the layout section.
On the side, my file directory always showed up on the paper when I printed my drawing out. Do you know how I can get rid of this ?
Any way to get a scale bar/title block text to reflect plotting at half size?
We use the common (24x36) sheet size for all projects, but when plotting we send out half size (12x18) as well. This means the scale bar reading 1"=40' is no longer correct. It should read 1"=20'. I would like to automate this.
I need to create a new parameter in label text, (example: adress number 2), so I did it, but when I load it into the project, i cant write anything, its just a question mark.