AutoCad :: Attributed Definitions Within Dynamic Block?
Aug 5, 2011
Basically I have a rectangle and want to change the dimensions of it. There are a couple of attributed definitions that I want to stretch the and change it length but I alsowant the attributed definitions to move with the right hand side of the rectangle and the stay a constant distance from the right hand side. Unfortunately when I use the stretch action it filters out the attributed from the object that I can stretch, any way to include these AD’s with the stretch action
View 3 Replies
ADVERTISEMENT
Jan 17, 2012
I have a dynamic block with attributed text that I want to remain horizontal right reading even when the block is rotated. I have set up the parameters and the actions how I was taught and even revisited one of AU's downloadable lessons to try to get it correct. my settings are the same as in the lesson. I have the rotate parameter / action set to only the geometry and did not select the attributed text. I also have the attribute locked. Nothing I do gets the text to rotate with the block and stay horizontal and right reading. It will either rotate the text along with the block or just leave the text stationary. I have tried adding a point parameter to the text but that doesn't seem to work either. I am using Base ACAD 2010 I have also attached the block for troubleshooting.
View 2 Replies
View Related
Sep 18, 2013
I am new to dynamic blocks. I have figured out how to use the Properites block for "preset" definitions but we offer a product in infine sizes (within limits). For example the width may range from 30" to 200" in fractional increments which is impossible to set up presets. Is there a way that a person can set up the properties block so that a person would be prompted to enter required information, I.E. Width = xx", Height = xx" etc.?
View 3 Replies
View Related
Mar 6, 2007
I've created a dynamic block with two visibility states. The second state is a copy of the first state, but some of the attribute definitions have been moved, along with some of the geometry.
When I insert the block, then toggle between the two visibility states, the geometry changes as I would expect, but the attributes stay in the position dictated on the first state.
How can I make sure that the attributes move for the second state, as I need them to.
View 9 Replies
View Related
Nov 12, 2013
Any way to create a dynamic link between the property set attached to a space and excel?
I have a lots of spaces that has a property set attached, some of this property changes often. So if it was possible to create a excel sheet that presents each property for each space and then I could change the property in excel and put it back to Architecture it would save me a lot of time.
View 1 Replies
View Related
Aug 11, 2011
I am using ACA 2009 and am experiencing something new with attributed blocks. When I insert the block, a copy of the block is placed at what seems to be an arbitrary distance away. As I fill in the boxes for each attribute, it appears in the image away from the insertion point. After I am done, the completed block appears filled out where it was inserted. I have never seen this before. Is there a setting affecting this?
View 2 Replies
View Related
Dec 29, 2011
what is the easiest wqy to extract information from an attrbuted block into a spreadsheet (excel)?
View 1 Replies
View Related
Jan 24, 2013
How do you get a point marker that uses a block with attributes to show the attributed text?
We are using tree symbols that have the size of the tree as an attribute, but when the points that use that block come in...the block shows up w/out any attributed text. Tried to edit the "block" or point marker with attedit command, but C3D tells me it is not a block. Understand that it is a "marker" for the point. But, what is stopping the text size of tree from showing up?
View 4 Replies
View Related
Jun 11, 2013
Is it possible to make a pull down inside of a attributed block?
For example: if I a have engineering code section of a title block and I want to be able to choose from a list of codes:
ASME A17.1-2004
ASME A17.1-2007
ASME A17.1-2010
ASME A17.1-2012
Can I set up the block to let me do that?
View 3 Replies
View Related
Apr 21, 2011
1) Problem about viewports :
I am using 2011, I have created 17 viewports in one paper space, there are 2 viewports not showing anything. I deleted 2 viewports with content, then the 2 viewports which were not showing is now showing images.
I started a new drawing, drew something very simple for testing, I could create 63 viewports the 64th is not showing.
I would like to ask what it is to control/affect the number of viewports I can create in one paper space.
2) To Edit an Attributed Block
When double click an attributed block (command = eattedit), the dialog box "Enhanced Attribute Editor" disappeared !
View 6 Replies
View Related
Nov 11, 2013
I have the drawing I'm working on, who's scale is set to "unitless". I'm attempting to insert a series of attributed blocks (containing titleblock information) into the paperspace of my drawing. The attributed block is also set to unitless.
Two of these blocks require editing to suite the drawing, the other two are to be edited at a later date by a third party.
Everything HAD been working fine, however, it appears the wheels have fallen off ~ I'm now experiencing a periodic error where, I insert a block to the 0,0 at a scale of 1 (as per procedure) but the block comes in at a fraction of the correct scale. I have to scale the block up by 25.4. (The imperial / metric conversion.) (Note, I'm working in Metric)
Even stranger - its not happening on all blocks. Just the two that have to be edited "in house".
I've checked measureinit within the blocks and it is set to metric. I'm limited in my ability to purge / audit the drawings as they don't want template information deleted from the drawing - but I don't know what other system variables i should be looking at.
I'm using CivilCad 2012 with Windows 7,
View 3 Replies
View Related
Dec 21, 2011
This is the command line responce I get when i attempt to enter text. All teh numeric expressions of all my dimensions have been replaced with a backslash. Along with all text including infomation on the attributed title block.
I have exhausted my options for figuring it out, do I need to reload the program? is there a restore default option? ( I haven't found one yet) I am running 2011 LT
View 1 Replies
View Related
Jul 9, 2012
I have a drawing with all my block definitions and the blocks inserted and annotated. Seems that in a previous version of Autocad, I could insert the drawing and cancel the insertion at some point of the insertion command sequence, such that the drawing was not inserted, but all the block definitions remained. I could then use the insert command and all of these blocks were available. Yes, sometimes this made my drawing memory size rather large and I would have to purge the unused blocks later to reduce the memory size of my drawing.
View 1 Replies
View Related
Oct 2, 2013
Is is possible to have an attributed block in a marker style or note style? I would like to have editable text upon insertion of the marker or text? I have tried unsuccessfully to get it to work. Does the fact that C3D displays the marker and note as objects prevent it from being editable? Is there a workaround?
View 1 Replies
View Related
Dec 21, 2012
I am trying to speed up some basic drafting of text revisions. In the P (plumbing) we call out the fixture units for a water pipe, along with the fixture units, the pipe size changes.
Is there any way to add numbers in an attributed block? (I have a lisp that works on text & mtext, but not attributes)
1.1. Example: Like if you have a block with two attributed text fields, the 1st field {x} is a number (fixture unit), and the 2nd field {y} is a number (pipe size). I would want it to only add the 1st text fields. [If possible then change the 2nd text field according to a changeable chart. (see #2)]
1.1.1. This is how the block looks like: x (y")
1.1.1.1. x could be any number from 0.5 – 10,000 (only using 1 decimal place, and only as needed)
1.1.1.2. y could be any number from the following list: ½, ¾, 1, 1¼, 1½, 2, 2½, 3, 3½, 4, 5, 6
Is there a way like in excel that you can set up a formula that will give a numerical result depending on other input? Like pipe size that change depending on the number of fixtures. There would need to be two different formula, one for hot and one for cold values (The value would be set at the beginning of the job; typically these values would not change later in the job). This could be separate text or if possible using the attributed block as described in #1.
2.1. Example: Like if you have a block with two attributed text fields, the 1st field {x} is a number (fixture unit), and the 2nd field {y} is a number (pipe size). I would want it to change the 2nd text fields according to the value in the 1st text field. If the value in {x} is 0.5 – 1.0, it would result in ½; 1.5 – 7.0 = ¾; 7.5 - 17 = 1; 17.5 – 36 = 1¼; ect.
2.2. In excel it would be =IF(x)<1,"1/2",IF(x)<7,"3/4”,IF(x)<17,"1",…{all #’s in between} …IF(x)>5000,"6")))))
View 9 Replies
View Related
Mar 20, 2012
I'm trying to insert our company logo (a DXF file) into the a title block definition however the insertion point seems to default to 0,0.How can I insert it with a user defined insertion point?
You will see from the attached screen snipe what I mean about being forced to insert it at the 0,0, coordinates. I'd like to insert it into clear space then scale it and move it into replace the existing logo.
View 4 Replies
View Related
Sep 13, 2013
I'd like to set up a blockwith different attributes like Roomname, Floor, Area,...
Therefore I'd like to link a polyline of the drawing with the block and it shows me its area. I know how it works with fields, but not how to connect it when the field is within a block.
Is there a LISP for that?
View 4 Replies
View Related
Dec 27, 2011
I have been working on an AutoLISP routine which is intended to:
1) collect input from the user via a DCl dialog box
a) Create a List of the non-null "GROUP_CODE..." variable values collected from the dialog's settings
b) Create a List of the "ESN***#_Part" variable values collected from the dialog's settings (does the List elements' order need to be reversed after collecting them?)
2) Prompt the user to select an insertion point
3) Insert a Block named "ESN-CONTROL-WIRED" which has multiple attributes
a) Apply the first List element collected at step 1.a above to the attribute tag "INPUT_ADD" in the block
b) Apply the first List element collected at step 1.b above to the Attribute Tag "PART_NUMBER" in the block
4) Insert a second instance of the Block named "ESN-CONTROL-WIRED" below the first instance
a) Apply the second List element collected at step 1.a above to the attribute tag "INPUT_ADD" in the block
b) Apply the second List element collected at step 1.b above to the Attribute Tag "PART_NUMBER" in the block etc. .... keep inserting the block "ESN-CONTROL-WIRED" below the previous on until all the input from the dialog has been displayed in the attributes.
Notes:
The Dialog's pop-up lists are populated from external .TXT files which reside on our network (or alternate local C: drive folder if no network drive is found)
Inside the file "ESN_SENSORS_NUMBER.LSP", it is the function "ESN_APPLY_TAG" which I am struggling with how to write...
find inside the .ZIP file:
- (2) example screenshot .BMPs showing dialog box settings and what the resulting output in AutoCAD should look like
- (1) ESN_SENSORS_NUMBER.LSP
- (1) ESN_SENSORS_NUMBER.DCL
- (1) ESN_SENSORS_NUMBER.DWG with a sample output - and the definition of the block ESN-CONTROL-WIRED
- (1) ESN-OCC.txt which populates the PopUp List Boxes
- (1) ESN-DAYLT.txt which populates the PopUp List Boxes
- (1) ESN-IR.txt which populates the PopUp List Boxes
View 6 Replies
View Related
Aug 9, 2013
I am reasonably experienced in coding in VBA but cannot find any references as to how to achieve the above within VBA so am now turning to LISP to see if I can achieve it in that language.
Basically I want to be able to create multiple instances of an attributed block using an external source, e.g. a spreadsheet to provide data for the attributes.
I'm not even sure if this is possible.
I can find lots of references for extracting attribute date to a spreadsheet but I want to go the other way!
View 2 Replies
View Related
May 7, 2013
I have some code to replace the current title block with a title block from a template file. I just don't like how it adds a new title block definition named "copy of titleblock". I'd like to delete or replace the current title block definition so only the newly added one is listed.
Sub test() Dim odrawdoc As DrawingDocument Set odrawdoc = ThisApplication.ActiveDocument If (odrawdoc.DocumentType <> kDrawingDocumentObject) Then Exit Sub Dim oTemplate As DrawingDocument Dim oSourceTitleBlockDef As TitleBlockDefinition Dim oNewTitleBlockDef As TitleBlockDefinition Dim oSheet As Sheet Set oTemplate = ThisApplication.Documents.Open(ThisApplication.FileOptions.TemplatesPath & "template.idw", False) Set oSourceTitleBlockDef = oTemplate.ActiveSheet.TitleBlock.Definition Set oNewTitleBlockDef = oSourceTitleBlockDef.CopyTo(odrawdoc) ' Iterate through the sheets. For Each oSheet In odrawdoc.Sheets oSheet.Activate oSheet.TitleBlock.Delete Call oSheet.AddTitleBlock(oNewTitleBlockDef) Next oTemplate.CloseEnd Sub
I'm just being picky at this point, but I don't want a buildup of title block definitions. We reuse drawings all the time which is why a simple method of updating a title block would be nice. I can just imagine in some years time after a title block update or two there are 20 "copy of copy of copy of .................. titleblock" listed in a drawing file.
View 8 Replies
View Related
Sep 20, 2013
1. What is the easiest way to find points that are not constrained? I get a notice that the block is not fully constrained and its a nightmare going through all the lines trying to find where I need to apply a constarinet.( I can't wait to get off ACAD and back to Inventor.)
2. When I try to save a dynamic block using the Save Block icon under Open/Save, if the dynamic block is not fully constrained, and I click save, when I reopen the block to edit all of my constraints are gone, this has happened twice. Now I just exit by Xing out and saving changes.
View 2 Replies
View Related
Mar 22, 2013
So I've done a reasonable amount of work with dynamic blocks. I have a block with a rotation action and grip to arbitrarily align it. However I realized when trying to combine it with an alignment grip (which actions on the basic or fundamental block rotation angle) that there didn't seem to be a way to some how link a dynamic block rotation action or one of the custom angle properties to a the fundamental block rotation angle. Thus there are two additive rotations at work; the dynamic block one with its grip and the fundamental rotation property.
This can cause some confusion when one person aligns with the grip and another via rotating the block's fundamental property and would also be problematic in the generalized sense if one was trying to select or programmatically read back the net angle alignment.
View 2 Replies
View Related
Jun 13, 2013
I have a dynamic block, that represents a stirrup.
I inserted in the block a Block Propreties Table, that have some preset dimensions for the stirrups. The grip of this table I decided to put in the top right corner.
The problem is that I can't make this grip moveable )
See the attachement with the block
View 1 Replies
View Related
Jul 25, 2012
new to dynamic blocks but looking to streamline my wiring diagrams here and have created a block that shows the typical wire styles we use in a simple easy way. I now want to add an overall flip to the entire block and have not been able to find set this. I would prefer to use the same label and go from there. I have included the block to show what I mean. It is only working on the single visible item at the one time. I know this has to be possible just let me know what I am doing wrong. I am running AutoCad LT 2013
View 3 Replies
View Related
Feb 28, 2012
I need to create a dynamic block for a "Glass Panel" in a balustrade. I need to be able to insert it, in one corner and stretch it in another corner, to suit the staircase angle.
I've created the block, but it isn't working correctly. I've attached a drawing, with the left hand drawing a sketch of how it needs to be. The right hand drawing is my dynamic block attempt. As can be seen, when the block is stretched between the 2 points, it doesn't follow the angle of the staircase correctly (Very slight run off)
View 9 Replies
View Related
Nov 21, 2011
I wish to create a dynamic block containing some attributes. These attributes are inside rectangles that can't be modified in length using linear parameters ; but the attribute has to be always in the middle of the rectangle. So, I draw a line inside the rectangle (in a hidden layer) and insert the attribute with center justification (not sure for the translation) that I place in the middle of this line ; then I put a coincidence constraint (not sure for the translation, but it's the first one) linking the middle of the line with the middle of the attribute.
But here's the problem : when stretching my rectangle, the insertion point of the attribute suddenly changes from "center" to "bottom left".
View 2 Replies
View Related
Dec 4, 2013
I am looking for a way to use the ATTIN/ATTOUT workflow to bring in data from an excel spreadsheet to drive the size of each of my block's instances. The block will be simple, a rectangle, with width and length parameters. For each entity in my excel/csv file these parameter values are spelled out. I know how to display these parameters in my attributes, but I don't know how, if I were to feed in these values, to drive the geometry. If there's a better way to take a list of width and length values to generate a series of blocks each with a rectangle containing its respective size.
View 1 Replies
View Related
Nov 7, 2011
I need to do some repetitive task on a lot of dynamic blocks, unfortunately, when I open each file, AutoCAD keeps asking if I want to open it with the block editor.
Is there a way to disable that dialog and open the files as normal dwgs?
A hint: BLOCKEDITLOCK doesn't make it, it shows another dialog...
View 4 Replies
View Related
Mar 26, 2012
I'm trying to make a dynamic block of a column radiator.
It should be very simple. It's a 46mm wide module that comes in a range of heights (300, 500, 600, & 750mm) and a range of assembly widths (9, 13, 18, 22 & 27 modules wide - more commonly given as mm widths of 414, 598, 828, 1012 & 1242 respectively).
My attempt at constructing it has gone quite well, but when 'stretching' the block a ghost of the core 414 (w) x 300 (h) unit remains. I attach the block to give you a better idea of what I mean.
View 4 Replies
View Related
Jul 16, 2010
I have a drawing ("SURUBURI.dwg") with several dynamic blocks ("M12", "M16", "M18" ... an so on...). I want to insert in my current drawing, one of the blocks from SURUBURI.dwg, for instance the block named "M12".
For that i tried creating a new command "INSERT_M12" that has the following script :
^C^C-INSERT; "I:/Ionut Mihaila/Goodies/SURUBURI.dwg/M12"
Now obvious that doesn't work, but i think it shows clearly what i want to accomplish. So is there an other way to do this?
View 9 Replies
View Related
Sep 18, 2013
I'm working on a drawing and I want an action to work on two diffrent dynamic blocks.
In my case, I wish to have two blocks that I can rotate by one rotation grip.
How do I manage to work this out?
View 1 Replies
View Related
