This is the command line responce I get when i attempt to enter text. All teh numeric expressions of all my dimensions have been replaced with a backslash. Along with all text including infomation on the attributed title block.
I have exhausted my options for figuring it out, do I need to reload the program? is there a restore default option? ( I haven't found one yet) I am running 2011 LT
I've argued this repeatedly with the powers that be at my small company and they're set on some old methods that I'm trying to figure out how to make happen.
We often have weldments where we do an assembled view on page 1 and balloon it and have a parts list. Pages 2-4 will be the details of the welded parts. On page 1, I bring in the "Title" and "Subject" fields from the assembly iProperties.
Here's the tricky part. On pages 2+, I don't want to bring in those two fields, I want to bring in something different. Is it possible to differentiate like that?
Second part of the question: is there a way to pull the balloon item number from page 1 into a field somewhere on following pages? For example: page 3 may show the details for "item 2". Can I bring the value of that balloon (item 2) into page 3 somehow?
I was curious, when creating multi sheet drawings, how can I place different information in the title block on each drawing?
Example, 2 pages, Description on page 1 = PAGE 1 DESC, by default this same description will show up on all subsequent pages. How do I get page 2 description to be different?
Inventor 2014 PDS
I have 200 files listed in Excel. The file name in excel is an attribute being document number in title block.
How I can import this directly into eac .dwg file?
How do you make the information in your titleblock transfer to all pages?
I am sick of going on each page in paperspace and re-editing the same minor details.
I have a dynamic block with attributed text that I want to remain horizontal right reading even when the block is rotated. I have set up the parameters and the actions how I was taught and even revisited one of AU's downloadable lessons to try to get it correct. my settings are the same as in the lesson. I have the rotate parameter / action set to only the geometry and did not select the attributed text. I also have the attribute locked. Nothing I do gets the text to rotate with the block and stay horizontal and right reading. It will either rotate the text along with the block or just leave the text stationary. I have tried adding a point parameter to the text but that doesn't seem to work either. I am using Base ACAD 2010 I have also attached the block for troubleshooting.
View 2 Replies View RelatedIs is possible to have an attributed block in a marker style or note style? I would like to have editable text upon insertion of the marker or text? I have tried unsuccessfully to get it to work. Does the fact that C3D displays the marker and note as objects prevent it from being editable? Is there a workaround?
View 1 Replies View RelatedI am trying to speed up some basic drafting of text revisions. In the P (plumbing) we call out the fixture units for a water pipe, along with the fixture units, the pipe size changes.
Is there any way to add numbers in an attributed block? (I have a lisp that works on text & mtext, but not attributes)
1.1. Example: Like if you have a block with two attributed text fields, the 1st field {x} is a number (fixture unit), and the 2nd field {y} is a number (pipe size). I would want it to only add the 1st text fields. [If possible then change the 2nd text field according to a changeable chart. (see #2)]
1.1.1. This is how the block looks like: x (y")
1.1.1.1. x could be any number from 0.5 – 10,000 (only using 1 decimal place, and only as needed)
1.1.1.2. y could be any number from the following list: ½, ¾, 1, 1¼, 1½, 2, 2½, 3, 3½, 4, 5, 6
Is there a way like in excel that you can set up a formula that will give a numerical result depending on other input? Like pipe size that change depending on the number of fixtures. There would need to be two different formula, one for hot and one for cold values (The value would be set at the beginning of the job; typically these values would not change later in the job). This could be separate text or if possible using the attributed block as described in #1.
2.1. Example: Like if you have a block with two attributed text fields, the 1st field {x} is a number (fixture unit), and the 2nd field {y} is a number (pipe size). I would want it to change the 2nd text fields according to the value in the 1st text field. If the value in {x} is 0.5 – 1.0, it would result in ½; 1.5 – 7.0 = ¾; 7.5 - 17 = 1; 17.5 – 36 = 1¼; ect.
2.2. In excel it would be =IF(x)<1,"1/2",IF(x)<7,"3/4”,IF(x)<17,"1",…{all #’s in between} …IF(x)>5000,"6")))))
On my version of CAD 2010 (on my other laptop) I can print to PDF and then turn layers on/off in Adobe Reader.
At the moment I've only got access to the 2009 version. Is it possible still print to PDF and the layer information included in the export?
Basically I need to be able to add different information into each channel including the alpha without the image being transparent at all.
Not to compare at all, but in photoshop i could work solely in the alpha channel without the RGB channels visible, then enabling the RGB channels would allow me to see the entire image without any transparency.
Basically, i want to be able to use the alpha channel for things other than transparency. For storing different masks in each channel for use in shaders.
Attached is the start of a title block, which I hacked up from a title block I found on this forum.
If you use dd edit to change the text you can only ever type one line of text, the return key does not move you to the next line. How do I change this so I can type in columns.
I am using ACA 2009 and am experiencing something new with attributed blocks. When I insert the block, a copy of the block is placed at what seems to be an arbitrary distance away. As I fill in the boxes for each attribute, it appears in the image away from the insertion point. After I am done, the completed block appears filled out where it was inserted. I have never seen this before. Is there a setting affecting this?
View 2 Replies View RelatedBasically I have a rectangle and want to change the dimensions of it. There are a couple of attributed definitions that I want to stretch the and change it length but I alsowant the attributed definitions to move with the right hand side of the rectangle and the stay a constant distance from the right hand side. Unfortunately when I use the stretch action it filters out the attributed from the object that I can stretch, any way to include these AD’s with the stretch action
View 3 Replies View RelatedAC 2012, Win 7 64 Bit..I sent up this template a while ago, and for the life of me, I can't remember how I setup the text in the title block.I had it set so some text would only have to be changed on the first sheet, and the remainder would automatically populate on a regen.
When I tried to duplicate it, in the field dialog box I can't seem to find out how I got the block reference. Field category=Objects, Field names=Object, Object Type=Block reference.
starting a new job at work so setting up the job folder etc. grabbed the title block and the text attribute insert from the library.....
so here is when the issue started.....so title block and text attribute are both saved in model space, both have all the same settings, this also applies to the template we have here all match.
so i xref in my title page at 1:1 which comes in normal, then i insert my attribute block in at 1:1 but it comes in at some super size thing, normal 3.5 text size is now 1000......
have fiddled with everything gone back to the library set etc but got no idea.
the interesting bit is if i open the title block and insert the attribute block in, it comes in perfect......
so in saying that i am assuming it is the work template..... but none of this has changed for over a month and have created drawings since then........maybe a random setting somewhere has changed but again haven't done anything different to normal no new radical changes....
i have attached a copy of the title block and the text attribute.
I been working through Ellen Finklesteins AutoCad bible (using AutoCad Architecture 2012) and in the first exercise (quick start, drawing a window) I was going ok until I had to edit the title block and no matter what I tried in AutoCad Architecture 2012 I could not find a way to edit the title block. Maybe I should have bought a book that was specific to AutoCad Architecture 2012.
View 8 Replies View RelatedI having one DWG with in 50 layouts. In that, if i going to edit or change the date, description, and etc, means it will take too much time to update in all layouts (50nos.)
If possible to edit all layout with in one time?. One more thing, one type of title block used to all layouts and title block was with enhanced attribute text.
How to do this ? After ok seems to keep the single-row text.. I wish to fit that margin border.
View 2 Replies View Relatedwhat is the easiest wqy to extract information from an attrbuted block into a spreadsheet (excel)?
View 1 Replies View RelatedHow do you get a point marker that uses a block with attributes to show the attributed text?
We are using tree symbols that have the size of the tree as an attribute, but when the points that use that block come in...the block shows up w/out any attributed text. Tried to edit the "block" or point marker with attedit command, but C3D tells me it is not a block. Understand that it is a "marker" for the point. But, what is stopping the text size of tree from showing up?
Is it possible to make a pull down inside of a attributed block?
For example: if I a have engineering code section of a title block and I want to be able to choose from a list of codes:
ASME A17.1-2004
ASME A17.1-2007
ASME A17.1-2010
ASME A17.1-2012
Can I set up the block to let me do that?
1) Problem about viewports :
I am using 2011, I have created 17 viewports in one paper space, there are 2 viewports not showing anything. I deleted 2 viewports with content, then the 2 viewports which were not showing is now showing images.
I started a new drawing, drew something very simple for testing, I could create 63 viewports the 64th is not showing.
I would like to ask what it is to control/affect the number of viewports I can create in one paper space.
2) To Edit an Attributed Block
When double click an attributed block (command = eattedit), the dialog box "Enhanced Attribute Editor" disappeared !
Can I pre-fill some of text in my drawing’s title block under the “Field Text” –“Edit Property Fields” ? Because some of the files I will use the same text again and again, if I can save the pre-fill text title block in the template, it will save me lots of time.
View 6 Replies View RelatedHow to remove the "lbmass" text that shows up when I add the Physical Property "Mass" to my title block? Inv. 2008.
View 4 Replies View RelatedI have the drawing I'm working on, who's scale is set to "unitless". I'm attempting to insert a series of attributed blocks (containing titleblock information) into the paperspace of my drawing. The attributed block is also set to unitless.
Two of these blocks require editing to suite the drawing, the other two are to be edited at a later date by a third party.
Everything HAD been working fine, however, it appears the wheels have fallen off ~ I'm now experiencing a periodic error where, I insert a block to the 0,0 at a scale of 1 (as per procedure) but the block comes in at a fraction of the correct scale. I have to scale the block up by 25.4. (The imperial / metric conversion.) (Note, I'm working in Metric)
Even stranger - its not happening on all blocks. Just the two that have to be edited "in house".
I've checked measureinit within the blocks and it is set to metric. I'm limited in my ability to purge / audit the drawings as they don't want template information deleted from the drawing - but I don't know what other system variables i should be looking at.
I'm using CivilCad 2012 with Windows 7,
I have tried to change the size of the text in the title block and in other places within a drawing, but the changes are ignored. They always come back to Tahoma 0.120"
Is this a bug in the program?
Inventor 2013 with the latest service packs, etc.
I really need to make some changes to the title block and making the text smaller is one of them.
How to export title block attribute text .. in a order from different layout .? file ext .xls or .txt i got a tool named Autocad Automation tool but it not work very well autocad have data extraction - its also came all text .. and not in order .. can we develop the any lisp for that ?.
View 4 Replies View RelatedI'd like to set up a blockwith different attributes like Roomname, Floor, Area,...
Therefore I'd like to link a polyline of the drawing with the block and it shows me its area. I know how it works with fields, but not how to connect it when the field is within a block.
Is there a LISP for that?
I have been working on an AutoLISP routine which is intended to:
1) collect input from the user via a DCl dialog box
a) Create a List of the non-null "GROUP_CODE..." variable values collected from the dialog's settings
b) Create a List of the "ESN***#_Part" variable values collected from the dialog's settings (does the List elements' order need to be reversed after collecting them?)
2) Prompt the user to select an insertion point
3) Insert a Block named "ESN-CONTROL-WIRED" which has multiple attributes
a) Apply the first List element collected at step 1.a above to the attribute tag "INPUT_ADD" in the block
b) Apply the first List element collected at step 1.b above to the Attribute Tag "PART_NUMBER" in the block
4) Insert a second instance of the Block named "ESN-CONTROL-WIRED" below the first instance
a) Apply the second List element collected at step 1.a above to the attribute tag "INPUT_ADD" in the block
b) Apply the second List element collected at step 1.b above to the Attribute Tag "PART_NUMBER" in the block etc. .... keep inserting the block "ESN-CONTROL-WIRED" below the previous on until all the input from the dialog has been displayed in the attributes.
Notes:
The Dialog's pop-up lists are populated from external .TXT files which reside on our network (or alternate local C: drive folder if no network drive is found)
Inside the file "ESN_SENSORS_NUMBER.LSP", it is the function "ESN_APPLY_TAG" which I am struggling with how to write...
find inside the .ZIP file:
- (2) example screenshot .BMPs showing dialog box settings and what the resulting output in AutoCAD should look like
- (1) ESN_SENSORS_NUMBER.LSP
- (1) ESN_SENSORS_NUMBER.DCL
- (1) ESN_SENSORS_NUMBER.DWG with a sample output - and the definition of the block ESN-CONTROL-WIRED
- (1) ESN-OCC.txt which populates the PopUp List Boxes
- (1) ESN-DAYLT.txt which populates the PopUp List Boxes
- (1) ESN-IR.txt which populates the PopUp List Boxes
I've completed my drawing (Autocad architectural 2012) and set-up my multiple view-ports (at 1:50 and 1:5 scale) on my title-block.
I'm now going to add my text and dimensions im model space....and that's when the problems start!
I've created text and dimensions in annotative style.
The issue I have is when I change annotation scale from 1:50 to 1:5 my text and dimensions in model space automatically changes (as can be seen on attachment) to a huge scale but is perfect in layout view for differing scales.
I am reasonably experienced in coding in VBA but cannot find any references as to how to achieve the above within VBA so am now turning to LISP to see if I can achieve it in that language.
Basically I want to be able to create multiple instances of an attributed block using an external source, e.g. a spreadsheet to provide data for the attributes.
I'm not even sure if this is possible.
I can find lots of references for extracting attribute date to a spreadsheet but I want to go the other way!