Is is possible to have an attributed block in a marker style or note style? I would like to have editable text upon insertion of the marker or text? I have tried unsuccessfully to get it to work. Does the fact that C3D displays the marker and note as objects prevent it from being editable? Is there a workaround?
View 1 RepliesHow do you get a point marker that uses a block with attributes to show the attributed text?
We are using tree symbols that have the size of the tree as an attribute, but when the points that use that block come in...the block shows up w/out any attributed text. Tried to edit the "block" or point marker with attedit command, but C3D tells me it is not a block. Understand that it is a "marker" for the point. But, what is stopping the text size of tree from showing up?
Is there a way to change the marker style on general note labels that are already in the drawing without having to select them all and change it in the properties? I want to change the marker style from "basic" to "none" on the note labels but I'm not seeing a ToolSpace setting to change them all at the same time without having to individually change it...
View 8 Replies View RelatedIs there a way to change the text styles, lets say from "Standard" to "Romans", all at once within an attributed block, or do you have to update each tag attribute individually?
View 2 Replies View RelatedI have a dynamic block with attributed text that I want to remain horizontal right reading even when the block is rotated. I have set up the parameters and the actions how I was taught and even revisited one of AU's downloadable lessons to try to get it correct. my settings are the same as in the lesson. I have the rotate parameter / action set to only the geometry and did not select the attributed text. I also have the attribute locked. Nothing I do gets the text to rotate with the block and stay horizontal and right reading. It will either rotate the text along with the block or just leave the text stationary. I have tried adding a point parameter to the text but that doesn't seem to work either. I am using Base ACAD 2010 I have also attached the block for troubleshooting.
View 2 Replies View RelatedI believe I've found a bug with marker styles. I found this while editing a profile style. Under my profile style I have the Point of Vertical Intersection set to PI Point for the marker style.
Here is the screenshot of the marker style for the plan view.
Here is the screenshot of the marker style for the profile view with part of my profile shown next to it. Notice how the marker color is different in the profile than what it's set to. It's also not changing layers. It seems that the profile setting for the marker style display doesn't actually work. It takes the settings for the plan view and ignores the profile display style.
Infrastructure Design Suite Premium 2014
Civil 3D 2014 x64
Windows 7 64-bit
6GB RAM
This is the command line responce I get when i attempt to enter text. All teh numeric expressions of all my dimensions have been replaced with a backslash. Along with all text including infomation on the attributed title block.
I have exhausted my options for figuring it out, do I need to reload the program? is there a restore default option? ( I haven't found one yet) I am running 2011 LT
We use STB plot style tables for all of our drawings. I have several general note styles setup in Civil 3D 2012. When you pull the note text out so that you have a leader, the leader does not plot per the plot style assigned to the layer that the note is set to display on on the General tab. It appears as the proper color and freezes with the layer properly, but it plots with the settings of the plot style assigned to layer 0. Is there a reason that the leaders don't use the plot style setting form the layer it is displayed on?
View 4 Replies View RelatedI am trying to speed up some basic drafting of text revisions. In the P (plumbing) we call out the fixture units for a water pipe, along with the fixture units, the pipe size changes.
Is there any way to add numbers in an attributed block? (I have a lisp that works on text & mtext, but not attributes)
1.1. Example: Like if you have a block with two attributed text fields, the 1st field {x} is a number (fixture unit), and the 2nd field {y} is a number (pipe size). I would want it to only add the 1st text fields. [If possible then change the 2nd text field according to a changeable chart. (see #2)]
1.1.1. This is how the block looks like: x (y")
1.1.1.1. x could be any number from 0.5 – 10,000 (only using 1 decimal place, and only as needed)
1.1.1.2. y could be any number from the following list: ½, ¾, 1, 1¼, 1½, 2, 2½, 3, 3½, 4, 5, 6
Is there a way like in excel that you can set up a formula that will give a numerical result depending on other input? Like pipe size that change depending on the number of fixtures. There would need to be two different formula, one for hot and one for cold values (The value would be set at the beginning of the job; typically these values would not change later in the job). This could be separate text or if possible using the attributed block as described in #1.
2.1. Example: Like if you have a block with two attributed text fields, the 1st field {x} is a number (fixture unit), and the 2nd field {y} is a number (pipe size). I would want it to change the 2nd text fields according to the value in the 1st text field. If the value in {x} is 0.5 – 1.0, it would result in ½; 1.5 – 7.0 = ¾; 7.5 - 17 = 1; 17.5 – 36 = 1¼; ect.
2.2. In excel it would be =IF(x)<1,"1/2",IF(x)<7,"3/4”,IF(x)<17,"1",…{all #’s in between} …IF(x)>5000,"6")))))
I created 3 marker styles to be used be applied as markers within 3 figure styles, but using the same block for all 3 marker styles. The size of the marker styles is set to "Use fixed scale" and all have a Y and Z scale of 1 but different X values. Unfortunately it seems that if the X and Y values are different the marker will not show up on the figure.
Civil3D 2014 - Windows7 64bit
Where do you find the Leader Attachment Option in the Marker Style. I've looked but don't see it.
Civil 3D 2011
C3D 2012...but this feature has probably been in C3D for sometime
1-What is a 'Line Marker in Section' Section component of an Alignment Style?
2-How is it used (example )?
I have a document for a book with 1400 superior note numbers in it. At the end of the document is a list with the 1400 connecting note texts. Unfortunately they are NOT connected! How can I connect the note-numbers with their connecting note text?
View 1 Replies View RelatedWe're using C3D 2013 SP2. The survey company we use uses point styles to show the blocks. Say they shoot a catchbasin. Instead of inserting the block, the point shows up as the block.
I did a field check & needed to insert a missed CB. When I inserted the block, the other points that were CBs disappeared. I had to insert the block, copy it the clipboard, undo the insertion & then paste the block in. It did this on other drawings & other blocks.
Is there a way to search for a text style in a civil style? I have a text style that our company is trying to get rid of and I would very much like to not have to go through our 72 company styles.
AutoCAD Civil 3D 2014
HP Z620 Workstation 64-bit
Duel Intel Xeon E5-2620 @ 2.00 GHz
Ram: 48 GB
I am using ACA 2009 and am experiencing something new with attributed blocks. When I insert the block, a copy of the block is placed at what seems to be an arbitrary distance away. As I fill in the boxes for each attribute, it appears in the image away from the insertion point. After I am done, the completed block appears filled out where it was inserted. I have never seen this before. Is there a setting affecting this?
View 2 Replies View RelatedBasically I have a rectangle and want to change the dimensions of it. There are a couple of attributed definitions that I want to stretch the and change it length but I alsowant the attributed definitions to move with the right hand side of the rectangle and the stay a constant distance from the right hand side. Unfortunately when I use the stretch action it filters out the attributed from the object that I can stretch, any way to include these AD’s with the stretch action
View 3 Replies View Relatedwhat is the easiest wqy to extract information from an attrbuted block into a spreadsheet (excel)?
View 1 Replies View RelatedIs it possible to make a pull down inside of a attributed block?
For example: if I a have engineering code section of a title block and I want to be able to choose from a list of codes:
ASME A17.1-2004
ASME A17.1-2007
ASME A17.1-2010
ASME A17.1-2012
Can I set up the block to let me do that?
1) Problem about viewports :
I am using 2011, I have created 17 viewports in one paper space, there are 2 viewports not showing anything. I deleted 2 viewports with content, then the 2 viewports which were not showing is now showing images.
I started a new drawing, drew something very simple for testing, I could create 63 viewports the 64th is not showing.
I would like to ask what it is to control/affect the number of viewports I can create in one paper space.
2) To Edit an Attributed Block
When double click an attributed block (command = eattedit), the dialog box "Enhanced Attribute Editor" disappeared !
I have the drawing I'm working on, who's scale is set to "unitless". I'm attempting to insert a series of attributed blocks (containing titleblock information) into the paperspace of my drawing. The attributed block is also set to unitless.
Two of these blocks require editing to suite the drawing, the other two are to be edited at a later date by a third party.
Everything HAD been working fine, however, it appears the wheels have fallen off ~ I'm now experiencing a periodic error where, I insert a block to the 0,0 at a scale of 1 (as per procedure) but the block comes in at a fraction of the correct scale. I have to scale the block up by 25.4. (The imperial / metric conversion.) (Note, I'm working in Metric)
Even stranger - its not happening on all blocks. Just the two that have to be edited "in house".
I've checked measureinit within the blocks and it is set to metric. I'm limited in my ability to purge / audit the drawings as they don't want template information deleted from the drawing - but I don't know what other system variables i should be looking at.
I'm using CivilCad 2012 with Windows 7,
I'd like to set up a blockwith different attributes like Roomname, Floor, Area,...
Therefore I'd like to link a polyline of the drawing with the block and it shows me its area. I know how it works with fields, but not how to connect it when the field is within a block.
Is there a LISP for that?
I have been working on an AutoLISP routine which is intended to:
1) collect input from the user via a DCl dialog box
a) Create a List of the non-null "GROUP_CODE..." variable values collected from the dialog's settings
b) Create a List of the "ESN***#_Part" variable values collected from the dialog's settings (does the List elements' order need to be reversed after collecting them?)
2) Prompt the user to select an insertion point
3) Insert a Block named "ESN-CONTROL-WIRED" which has multiple attributes
a) Apply the first List element collected at step 1.a above to the attribute tag "INPUT_ADD" in the block
b) Apply the first List element collected at step 1.b above to the Attribute Tag "PART_NUMBER" in the block
4) Insert a second instance of the Block named "ESN-CONTROL-WIRED" below the first instance
a) Apply the second List element collected at step 1.a above to the attribute tag "INPUT_ADD" in the block
b) Apply the second List element collected at step 1.b above to the Attribute Tag "PART_NUMBER" in the block etc. .... keep inserting the block "ESN-CONTROL-WIRED" below the previous on until all the input from the dialog has been displayed in the attributes.
Notes:
The Dialog's pop-up lists are populated from external .TXT files which reside on our network (or alternate local C: drive folder if no network drive is found)
Inside the file "ESN_SENSORS_NUMBER.LSP", it is the function "ESN_APPLY_TAG" which I am struggling with how to write...
find inside the .ZIP file:
- (2) example screenshot .BMPs showing dialog box settings and what the resulting output in AutoCAD should look like
- (1) ESN_SENSORS_NUMBER.LSP
- (1) ESN_SENSORS_NUMBER.DCL
- (1) ESN_SENSORS_NUMBER.DWG with a sample output - and the definition of the block ESN-CONTROL-WIRED
- (1) ESN-OCC.txt which populates the PopUp List Boxes
- (1) ESN-DAYLT.txt which populates the PopUp List Boxes
- (1) ESN-IR.txt which populates the PopUp List Boxes
I am trying to create a block which consists of my company logo and some text to use on my drawing sheets or templates
I have created a block by making a autocad drawing and creating /saving it as a block .. When I insert the block into my drawing the text style changes into a different style... why is this happening and what can be done to prevent this change from occuring. I am using autocad lt 2009 and 2005 the problem is consistant with both versions...
I am reasonably experienced in coding in VBA but cannot find any references as to how to achieve the above within VBA so am now turning to LISP to see if I can achieve it in that language.
Basically I want to be able to create multiple instances of an attributed block using an external source, e.g. a spreadsheet to provide data for the attributes.
I'm not even sure if this is possible.
I can find lots of references for extracting attribute date to a spreadsheet but I want to go the other way!
Got a problem with the attached drawing. (The drawing will eventually be used as an xref).
I have created a dynamic block that has a (multi-line) attribute applied. This attribute is linked to an annotative text style. The drawing contains annotation scales. I have applied some of these annotation scales to the attribute so that it shows at 4.5 in paper space.
The annotation scales (metric) contained in the drawing are "1:500, 1:1000, 1:1250, 1:2000, 1:2500, 1:5000, 1:10000, 1:20000 and 1:25000". All these annotation scales are applied to the attribute.
The block contains a look-up table of properties that when applied, size the block to be used as a boundary to the following scales "1:500, 1:1000, 1:1250, 1:2000 and 1:2500".
Now, for example, i wish to set the blocks to be shown at 1:2500 in the drawing. I select the blocks and make them 1:2500 in the 'look-up' table. However, if i wish to set the annotation scale to 1:20000 (because this will xrefed into a drawing plan of a scale of 1:20000) it incorrectly shows the size of the attribute. The attribute has a 1:20000 annotation scale set to it but its size is not correct. This happens for other scales but for other scales (1:25000 for example) its fine. Also, the attribute could move when switching annotation scales and appear near the 0,0 WCS.
The layout tab shows the annotation scale and viewport scale set to 1:20000 but as you can see, the text is not set to 4.5.
I would prefer to have the attribute linked to the block though. I have tried ATTSYNC and RESETBLOCK but the bug keeps coming back.
Using AutoCAD 2011.
I am currently using AutoCAD 2011 but there is a couple in our office using 2012. When they open a drawing with attributed text it shifts the text, usually to the right. The text height stays the same as well as the vertical position. It appears the text letter spacing (kerning I think it is called) is adjusted to be closer and it shifts to the right. If I click on the text and then click on the grip for the text twice it puts it back to what it is suppose to be or was. This doesn't happen in any logical order it is random through out the drawings, making it harder to find and fix them all. I can save the file close it, re-open it and the text shift happens again, randomly.
We have only noticed this on drawings that have been opened with 2012. Is that a problem with 2012? Is there a fix for it? I found while GTS that someone clicked on the annotate>annotation scaling>sync scale positions so I tried that and it didn't adjust the text/attributes back to where they are suppose to be/where. The shift happens as stated while re-opening a drawing, also when doing a regen, I also noticed it happening while doing a simple copy/paste of a part that isn't shifting. I hope this makes sense as to what is happening, I would post a drawing but they REALLY frown on us "sharing" our drawings.
For labels, is the font decided in the general tab under text style or in the text component editor under the format tab? Are there overrides? There seems to be multiple locations for fonts choices when creating a label and I can't find a nice black and white answer.
Civil 3D 2012 SP4.0 Windows 7 Enterprise 64-bit
C3D 2014 SP1
Dell M6600, Core i7 @ 2.3GHz, 16 GB ram
Dell T3500 workstation, too much ram to post
I like using the edit label text in the lable styles to add additional text and information.
I can turn on / off the backroung mask for all the style but not each.
Is there a way to turn on / off the backround mask of each layout text.
I'm using civil 3d 2012 and testing 2013.
issue regarding attributed text updating when reinserting a DB. I have text override in a dimension, inserted a field into the text override but whenever I reinsert the block and change the values, the text does not update.
View 5 Replies View RelatedI've completed my drawing (Autocad architectural 2012) and set-up my multiple view-ports (at 1:50 and 1:5 scale) on my title-block.
I'm now going to add my text and dimensions im model space....and that's when the problems start!
I've created text and dimensions in annotative style.
The issue I have is when I change annotation scale from 1:50 to 1:5 my text and dimensions in model space automatically changes (as can be seen on attachment) to a huge scale but is perfect in layout view for differing scales.