I have a document for a book with 1400 superior note numbers in it. At the end of the document is a list with the 1400 connecting note texts. Unfortunately they are NOT connected! How can I connect the note-numbers with their connecting note text?
View 1 RepliesIs there a way to sync callout numbers to correspond with note numbers. When I add or delete notes in my drawings it takes to much time to update the callout number in the drawings. I need to figure out a way for the note and corresponding callout to change at the same time.
View 6 Replies View RelatedI have found an problem with change text on drawing note trough API.
Situation:
Create leader note in empty drawing
Change text on this note with following
Public Sub Run()Dim oDoc As DrawingDocumentSet oDoc = ThisApplication.ActiveDocumentDim oNotes As DrawingNotesSet oNotes = oDoc.ActiveSheet.DrawingNotesoNotes(1).FormattedText = "abcd"Debug.Print oNotes(1).Color.ColorSourceTypeEnd Sub
Then edit text stnadrda dialog, result is that color of text is changed from bylayer to overwited color.Strange is that trough api is color still set as bylayer.
Inventor 2013SP1
how to change a picture that he took with a web-cam holding a placard. The note he's holding say some random thing on it, and I want to replace it with something outlandishly silly. How would I go about doing this, AND how would I go about adding a placard/note like that to pictures of his where he isn't holding anything
View 1 Replies View RelatedIs is possible to have an attributed block in a marker style or note style? I would like to have editable text upon insertion of the marker or text? I have tried unsuccessfully to get it to work. Does the fact that C3D displays the marker and note as objects prevent it from being editable? Is there a workaround?
View 1 Replies View RelatedIs there any way to control the priority of what information Inventor displays "on top" in a drawing when you have two elements that overlap?
My specific situation is I have a text note whose boundary (where the text 'box' would be if that was turned on) overlaps a detail of a section view and seems to be preventing the display of the hatch layer in one of my section views.
I have attached 3 pictures to show this problem. The pictures show the section view in 3 slightly different positions relative to the text box. I selected the text box before taking the screen capture so you can reference the green "handles" to know where the boundary of the text box would be. Notice how the hatching of the welds, flanges, and pipe as well as a portion of the extension line and arrow for the 3/16 dimension are 'covered' by the boundary of the text box.
Is there a way to control the priority in which different layers are displayed, or is there a function similar to the "Bring Forward/Send Backward" options in Microsoft Word?
FYI, I am running Inventor 2013 RTM build 138.
I am trying to make a ransom type note with words cut out from magazines. I want the words to be different sizes and some different fonts (I know most all magazines have the same font). So of course the paper would have to be different sizes too. I am wanting the paper to be cut, not torn, from the magazine. And I am wanting WHOLE words (not the letters like in the Ransom Note font from DaFont). It would also be GREAT if the paper were somewhat different too (not always "white glossy" if you know what I mean).
I am a BIG time newbie, but am hoping there is a script (is that the right word?) or action that can help with this. Even if there is a web page out there that can create it on the web and then I can somehow get it into Photoshop, that would be great too.
The Ransom Note font would not be so bad if not every letter was the same every time. Like sometimes the letter "a" would be one font, and the next few times, each time it would be a different font.
I am creating a drawing that has some 40+ notes on it. Maybe half of these notes need to have a square, squircle, or some shape around them so I can later use that same shape enclosed number to point to a feature on the drawing that it is referencing. In the past when I had fewer notes I would just use the user symbols and losely place the squircle number in line with the other text and then use that same squircle number to point to the desired feature. The problem it is hard to align everything properly and if I move the text I then need to move the squircles.
In Pro/E I remember being able to type "@[1@]" and it would create a box around 1 in the text. Is there anything similar in Inventor?
Is there a way to download illustrator to galaxy note?
View 2 Replies View RelatedI went and bought a card reader, but I have no prompt to download pics? Normally on my computer, a prompt comes up and asks do u want to download pics? I could not find anywhere to begin the download?
View 2 Replies View RelatedBanknotes often feature cool images (usually distinguished persons) composed of thin lines with waves etc. Does anyone have an idea how to turn photos into such patterns?
View 1 Replies View RelatedI have a student who added Note Schedules on a Sheet, then right clicked on one of them and "Hide in View-Element". Now it shows on the Properties as being on the Sheet, but we can't seem to Unhide it.
View 1 Replies View RelatedIs there a way to add the all around symbol to a note or dimension? I see how to add it to a weld symbol and a feature control frame, but that doesn't work for me too much just yet...
View 8 Replies View RelatedWhat is the proper way to call out a square in a note? Do you put size then square symbol or square symbol then size?
View 2 Replies View RelatedWhen I am in the sound mixer and select for instance the music track, and want to drag the note symbol down toward the surround speakers, I have to hold the note with the mouse all the way of the entire music clip, otherwise, the symbol note returns slowly back to the center.
Is there any way to keep the note symbol fixed in the desire position without holding the mouse all the time of the entire music clip? I am using VS4.
Is there an easy way to add the superscript "2" to a note for Milli meters squared in Inventor 2010?
Example: mm2 or FT^2
is it possible to create a hole note without pitch.
i use standard thread in most cases so i just want the thread to be shown in the holenote tool on drawings (like M8 not M8x1,25)
In the drawing, i annotate a thread. the automatic text for thread depth is always, as far as i see, incorrect, for example if the thread depth is 50 it writes, i don't remeber, but something like 250.
Maybe it has to do with the font, altough i doubt. i am in israel, and the quantity of threads, also an automatic text, is written backwards, for example 4x instead of x4.
I create a hole feature in part and use Hole and Thread function in drawing view. All info displayed correctly, but if the model changes - note does not! the only way to get the new thread/hole designation is by using the Hole and Thread function again.
see print screen attached - I kept changing the model and using Hole and Thread tool couple of times. They all point to the same hole but look at the results..
Reboot does not work...
Autodesk Inventor 2012 Professional x64 SP2
Win 7 x64, Intel i7 930, 6GB PC-1600, Quadro FX-1800, 250 Gb 10k RMP
Is it a know issue that when you have a General Note style with a Dragged State where the Display is set to Stacked Text. If Background Mask is set to True. The Mask does not encompass the whole text.
Civil 3D 2012 SP 2.1
Dell Precision T7400, Xeon CPU 3.16 GHz
Win 7 Pro, 64-bit,12 GB RAM, Nvidia Quadro FX 4600
How to change drawingnote text format in vba? such as color, font, size.
call drawingnote.text.color.setcolor (255,0,0)
seems not working.
Autodesk Inventor Professional 2014
Autodesk Product Design Suite Standard 2013
Microsoft Office 2007 & 2013
Windows 7 64bit
Synergis Adept 2013
Visual Studio Express 2010
I was wondering if it is possible to use an expression in a general note label? The type of label I am using is a general note label that displays our finish grade profile elevation in plan view. What I am trying to do is add a value to that label for the TC elevation and G at the ROW. I noticed in the settings tab of the tool space, surfaces has an expression button that has what I want but I am not seeing that under General/Label Styels/Note. Is it possible to right my own expression? We are using Civil 3D 2008 with Windows XP.
View 3 Replies View RelatedAside from manually adding RH or LH to a hole note leader, any way of getting the HOLE Direction (left hand or right hand) into the leader note?
Windows 7 x64 -64 GB Ram, Intel Xeon E5-1620 @ 3.6 GHz
ATI FirePro V7800 2 GB, 180 GB SSD & 1 TB HDD, Inv R2013 PDS Premium SP2 Update 3 (Build 200), Vault 2013 Workgroup Update 2 (Build 17.2.9.0)
How can I change thread note from M12x1.75 to M12?
For our drawing standard, we don’t put the standard thread pitch into the thread note, and we have to manual to over write the thread note. But when the thread size changes and the note never get updated. Is there any other way to get the note to link to the thread size?
Any way, using iLogic, to get the K-Factor from a flat pattern sheet metal view on an idw drawing and add it as a note.
I'd like a rule that would access the flat pattern on the drawing, get the K-Factor value and then create a note that says, for example, "K-Factor Value = 44".
I see in the iLogic Snippets there's a Get Active KFactor under the Sheet Metal section, but I don't know where to start.
Is it possible to get a Limit/Fit tolerance included in a Hole Note call out, such as H7 etc?
Currently, when I am dimensioning Counter Bore holes, I have to use a general dimension for CBore dia incuding the Limit/Fit tolerance and manually add the hole dia (or visa versa). This means I have to manually update any changes to hole dia.
Trying to get a flag note (note# in a triangle) in a bulleted list (NOTES: field at top left of drawing).
Currrently, I have created a dynamic block (triangle with the number) and it's put in front of the applicable note but it's kind of a kludge.
I would like to use the Notes: field as an MTEXT, bulleted list. Some of the notes would have bulleted number in a triangle.
See attachment. I can't get the units off of inch.
View 1 Replies View RelatedI'm trying to print 2 notecards per sheet of paper (8.5 x 11) Ii created a template that is the actual size of the paper, with 4 quadrants. I created the front of the card image in the actual size of the quadrant,and I set printer to actual size (8.5 x 11). yet when i print it out it is not right to cut and fold. what kind of adjustments to do i need to make to get it to line up. Also when I move the card image into the quadrant it seems like it is not longer the full size of the quadrant. Even when I move it or adjust the image so it looks centered it doesn't work. also in the print window at the bottam i unselect centered and adjust the top and left numbers, but in the preview i see that it is not filling the page.
View 19 Replies View RelatedI want to edit a photo from my Gallery on my Samsung Galaxy Note 10.1, but all I get when I click on Local Images is a few pre-loaded photos that presumably came with the app. I don't know how or where to update PS either, I only bought this tablet a week ago.
View 2 Replies View RelatedI was just wondering if you can customize your interface so you can edit note labels (or any labels for that matter) by double clicking. I've already gone throught the cui files but I can't find anything. Am I missing something. c3d 2007
View 9 Replies View Related