In the drawing, i annotate a thread. the automatic text for thread depth is always, as far as i see, incorrect, for example if the thread depth is 50 it writes, i don't remeber, but something like 250.
Maybe it has to do with the font, altough i doubt. i am in israel, and the quantity of threads, also an automatic text, is written backwards, for example 4x instead of x4.
Aside from manually adding RH or LH to a hole note leader, any way of getting the HOLE Direction (left hand or right hand) into the leader note?
Windows 7 x64 -64 GB Ram, Intel Xeon E5-1620 @ 3.6 GHz
ATI FirePro V7800 2 GB, 180 GB SSD & 1 TB HDD, Inv R2013 PDS Premium SP2 Update 3 (Build 200), Vault 2013 Workgroup Update 2 (Build 17.2.9.0)
How can I change thread note from M12x1.75 to M12?
For our drawing standard, we don’t put the standard thread pitch into the thread note, and we have to manual to over write the thread note. But when the thread size changes and the note never get updated. Is there any other way to get the note to link to the thread size?
I'd like to use an "NPT" Hole Dialog thread but it doesn't show up in the Thread type list.But it does show up in the Thread Dialog/Specifications Tab/ Thread type list so it's available.
I definitely have "NPT" in my Thread.xls & I have my Options/Files set to point to the correct Design Data folder.
Inventor Suite 2013 Ultimate
My colleague installed IV2013. He has excel 2010 installed in his PC also. However he cannot create thread hole (thread option is grey out).
View 4 Replies View RelatedAutodesk Inventor 2013.
Could not find file C:Program FilesAutodeskInventor 2013Design DataXLS13XLSen-USThread.xls containing thread data.
I can drill a hole as needed, but can't thread a hole at all. Not with the Tapped Hole function when drilling the hole, or after drilling the hole then using the Thread Tool. Inventor will just not let me create threads this way outside of cutting a coil.
View 9 Replies View RelatedI am trying to add a thread class to the thread.xls. (that part is ok)
The thread is M26x2.0
I can't seem to find any information for me to simply plug in the values into the .xls, so I am thinking that I have to crunch some numbers. which is fine. I just want to make sure that this image below is the correct the reference for this task.
using the pitch, I should be able to calculate all my min and max values, but the xls has class column and a tap drill column, how would I determine these values??
Inventor Professional 2014-Update 2 - AutoCAD Electrical 2014
Win7-x64 | ASUS P8Z77-V | i7 3770 -3.4 GHz | 32GB RAM |
240GB SSD | nVidia GTX 670 4GB - 320.49
I have a document for a book with 1400 superior note numbers in it. At the end of the document is a list with the 1400 connecting note texts. Unfortunately they are NOT connected! How can I connect the note-numbers with their connecting note text?
View 1 Replies View RelatedI am creating a drawing that has some 40+ notes on it. Maybe half of these notes need to have a square, squircle, or some shape around them so I can later use that same shape enclosed number to point to a feature on the drawing that it is referencing. In the past when I had fewer notes I would just use the user symbols and losely place the squircle number in line with the other text and then use that same squircle number to point to the desired feature. The problem it is hard to align everything properly and if I move the text I then need to move the squircles.
In Pro/E I remember being able to type "@[1@]" and it would create a box around 1 in the text. Is there anything similar in Inventor?
I have found an problem with change text on drawing note trough API.
Situation:
Create leader note in empty drawing
Change text on this note with following
Public Sub Run()Dim oDoc As DrawingDocumentSet oDoc = ThisApplication.ActiveDocumentDim oNotes As DrawingNotesSet oNotes = oDoc.ActiveSheet.DrawingNotesoNotes(1).FormattedText = "abcd"Debug.Print oNotes(1).Color.ColorSourceTypeEnd Sub
Then edit text stnadrda dialog, result is that color of text is changed from bylayer to overwited color.Strange is that trough api is color still set as bylayer.
Inventor 2013SP1
Is there a way to add the all around symbol to a note or dimension? I see how to add it to a weld symbol and a feature control frame, but that doesn't work for me too much just yet...
View 8 Replies View RelatedWhat is the proper way to call out a square in a note? Do you put size then square symbol or square symbol then size?
View 2 Replies View RelatedYou can organize a multi-threaded work with data through Inventor API? For example, there is a assembly and I need the first part of assembling a list of items to consider in a data set, the second part of the list - in the second data set, the third - the third and so on up to N, where N - depends on how many threads can run in the system . Whether these flows are processed and to receive data in parallel? Or go to the consistent implementation of this algorithm will first be processed by the first part, and only after it will start the second ...?
Autodesk
I am having a terrible time getting the thread modeler to work correctly for an M16x 1.5 thread. I have tried multiple approaches to get the correct thread dimensions output.These are the steps I take:
1) Create hole (I've used both major and minor thread diameters,16mm and 14.376mm)
2) Apply Inventor threads (M16 x 1.5)
3) Select threads from tree using the Add-in thread modeler "Controller"
4) Analyze dimensions finding both cases yield the wrong dimensions.
This add-in would be very useful and a great time saver if it would work correctly.
How to add a Thread to both the Nut & Bolt....i always use the Thread Tool but i would like to also know how to add an actual thread.
View 2 Replies View RelatedI need to add thread to a hole but cannot do this under the edit command. How to do this ?
View 7 Replies View RelatedI need to make a thread of 8 D.P.I on a diameter of 104.8 mm.It's not a standard thread size.Where is the excel file with the ANSI threads?
View 9 Replies View RelatedI have recently installed Inventor 2013 Professional Ultimate and am having some issues. I can not seem to get the Thread function to work. When I go to apply a thread I get the follow error....
When I go to search the directory, I find that the Thread xls document is infact there, but it is not located where the program thinks it should be (XLS Folder --> en-US Folder)
I also made sure that the Design Data location was correct within the Application Options...
A reboot of the computer did not work.
Is there an easy way to add the superscript "2" to a note for Milli meters squared in Inventor 2010?
Example: mm2 or FT^2
is it possible to create a hole note without pitch.
i use standard thread in most cases so i just want the thread to be shown in the holenote tool on drawings (like M8 not M8x1,25)
I create a hole feature in part and use Hole and Thread function in drawing view. All info displayed correctly, but if the model changes - note does not! the only way to get the new thread/hole designation is by using the Hole and Thread function again.
see print screen attached - I kept changing the model and using Hole and Thread tool couple of times. They all point to the same hole but look at the results..
Reboot does not work...
Autodesk Inventor 2012 Professional x64 SP2
Win 7 x64, Intel i7 930, 6GB PC-1600, Quadro FX-1800, 250 Gb 10k RMP
How to change drawingnote text format in vba? such as color, font, size.
call drawingnote.text.color.setcolor (255,0,0)
seems not working.
Autodesk Inventor Professional 2014
Autodesk Product Design Suite Standard 2013
Microsoft Office 2007 & 2013
Windows 7 64bit
Synergis Adept 2013
Visual Studio Express 2010
Any way, using iLogic, to get the K-Factor from a flat pattern sheet metal view on an idw drawing and add it as a note.
I'd like a rule that would access the flat pattern on the drawing, get the K-Factor value and then create a note that says, for example, "K-Factor Value = 44".
I see in the iLogic Snippets there's a Get Active KFactor under the Sheet Metal section, but I don't know where to start.
Is it possible to get a Limit/Fit tolerance included in a Hole Note call out, such as H7 etc?
Currently, when I am dimensioning Counter Bore holes, I have to use a general dimension for CBore dia incuding the Limit/Fit tolerance and manually add the hole dia (or visa versa). This means I have to manually update any changes to hole dia.
See attachment. I can't get the units off of inch.
View 1 Replies View RelatedIn my project file, under design data folder options, I have it set to c:designsStandardsStyles. This is where I have my thread.xls located.
When I try to place a threaded feature, Inventor gives me a warning that it cant find the Thread.xls file.
It is looking for this file in c:DesignsStandardsStylesXLSen-USThread.xls. Where is it getting this path from?
We are using inventor 2012 at my school and have recently purchased a makerbot 3D printer abd having lots of fun. However i recently created a model that has an M40 Thread as part of the model. However when i try to 3D print it, it doesn't recognise the thread and it isn't printed. I see the thread on the ipt but once it is saved as an stl it seems to disappear.
View 6 Replies View RelatedHow to make the nut in this assembly turn with the thread, all I can figure out how to do is put it all the way in then turn it 360 degrees.
i5 3570k@4.4ghz gtx 670, 8gb ddr3 1600mhz
How to make thread in assembly?
View 9 Replies View RelatedIs it possible to attach a sketched symbol to a leader note? I tried the following code, but an error occurs in the line adding the sketchedsymbol. The geometry intent, which seems to be created correct, isn't a valid input for the sketched symbol.
Private Sub AttachSketchedSymbolToLeaderNote()Dim oDrawDoc As DrawingDocumentSet oDrawDoc = ThisApplication.ActiveDocumentDim oLeaderNote As LeaderNoteSet oLeaderNote = oDrawDoc.ActiveSheet.DrawingNotes.LeaderNotes.Item(1)Dim oSketchedSymbolDef As SketchedSymbolDefinitionSet
[Code] ........