AutoCAD Inventor :: Can't Change Hole Note Units
Oct 1, 2013See attachment. I can't get the units off of inch.
View 1 Replies
ADVERTISEMENT
AutoCAD Inventor :: Hole Note Doesn't Update After Change Part
Nov 28, 2012Using 2013 sp1.1...After I change the hole size in the part, the callout in my hole note does not update. (crazy, I know).
If I pull a new hole note after the change, it has the correct dimension. But, if I change the hole size again, this new hole note does not update.I put the part on a new idw and it updates correctly, so somehow the idw is hosed.
AutoCAD Inventor :: Create A Hole Note Without Pitch?
Nov 9, 2012is it possible to create a hole note without pitch.
i use standard thread in most cases so i just want the thread to be shown in the holenote tool on drawings (like M8 not M8x1,25)
AutoCAD Inventor :: Hole Note Not Updating In Drawings
Sep 27, 2012I create a hole feature in part and use Hole and Thread function in drawing view. All info displayed correctly, but if the model changes - note does not! the only way to get the new thread/hole designation is by using the Hole and Thread function again.
see print screen attached - I kept changing the model and using Hole and Thread tool couple of times. They all point to the same hole but look at the results..
Reboot does not work...
Autodesk Inventor 2012 Professional x64 SP2
Win 7 x64, Intel i7 930, 6GB PC-1600, Quadro FX-1800, 250 Gb 10k RMP
AutoCAD Inventor :: Thread Direction In IDW Hole Note
Jan 14, 2013Aside from manually adding RH or LH to a hole note leader, any way of getting the HOLE Direction (left hand or right hand) into the leader note?
Windows 7 x64 -64 GB Ram, Intel Xeon E5-1620 @ 3.6 GHz
ATI FirePro V7800 2 GB, 180 GB SSD & 1 TB HDD, Inv R2013 PDS Premium SP2 Update 3 (Build 200), Vault 2013 Workgroup Update 2 (Build 17.2.9.0)
AutoCAD Inventor :: Limit / Fit In Hole Note Call Out?
May 10, 2012Is it possible to get a Limit/Fit tolerance included in a Hole Note call out, such as H7 etc?
Currently, when I am dimensioning Counter Bore holes, I have to use a general dimension for CBore dia incuding the Limit/Fit tolerance and manually add the hole dia (or visa versa). This means I have to manually update any changes to hole dia.
AutoCAD Inventor :: Hole Note Tap Drill Option Gray Out
Oct 24, 2013The "tap drill" option in hole note in idw drawing is gray out. so I was playing around with it and fix the problem luckily.
I go to hole feature model and change thread class from 2B to 3B. then, the "tap drill" option is turn on in idw drawing.
is this correct way to do it? i have few drawing to fix it. is there a faster way?
inventor 2013 sp2 and window 7
Autodesk Inventor Professional 2014
Autodesk Product Design Suite Standard 2013
Microsoft Office 2007 & 2013
Windows 7 64bit
Synergis Adept 2013
Visual Studio Express 2010
AutoCAD Inventor :: No Breaking Mode In Hole Note For Arrow?
Jun 6, 2012I am using 2011 version of inventor.
In drafting while creating note of hole there is no breaking point for arrow there is only straight arrow line( pls find attached file of DIM 01). I am not getting any setting for the same.
I want notation having breaking point. ( Ref attachment Dim -2)
AutoCAD Inventor :: 2012 SP1 Hole Note Quantity Error
Jan 7, 2012I've attached a sample part & drawing of a hollow cylinder with 6 equally spaced radial holes drilled around it.
If you change the depth of the hole you will get a different quantity of holes in the drawing hole note.
I get a hole note quantity of 6 holes which is correct if I set the hole depth to 1". Change the hole depth to 2" and the hole note quantity shown changes to 5. Change the hole depth to 3" and the hole note quantity changes to 4.
I often draw bushings with radial holes like this and have to take care to not let this behavior create a wrong drawing.
AutoCAD Inventor :: Alternate Units In Hole Notes
Sep 11, 2009When using alternate dimensions in hole notes it repeats the full note for both dimension units. I would like to only have the dimensional data have the alternate information and not repeat the full note (see attached file).
IV 2010, Vista 64
AutoCAD Inventor :: Alternate Units On Hole Notes
Oct 25, 2012I am using 2012 SP2 and when I try to place hole notes with both metric and inches it only gives me inches (in both displays)
View 4 Replies View RelatedAutoCAD Inventor :: Inventor Hole Table - Mixed Units - Description Cell
Dec 18, 2013Is there a way in the description field of an Inventor hole table to have mixed units? Some hole sizes at fractions, some at 2 plc, and others at 3 places.
Inventor Pro 2013 or 14
AutoCAD Inventor :: Change Text On Note?
Jan 10, 2013I have found an problem with change text on drawing note trough API.
Situation:
Create leader note in empty drawing
Change text on this note with following
Public Sub Run()Dim oDoc As DrawingDocumentSet oDoc = ThisApplication.ActiveDocumentDim oNotes As DrawingNotesSet oNotes = oDoc.ActiveSheet.DrawingNotesoNotes(1).FormattedText = "abcd"Debug.Print oNotes(1).Color.ColorSourceTypeEnd Sub
Then edit text stnadrda dialog, result is that color of text is changed from bylayer to overwited color.Strange is that trough api is color still set as bylayer.
Inventor 2013SP1
AutoCAD Inventor :: How To Change Drawing Note Format In VBA
Aug 13, 2012How to change drawingnote text format in vba? such as color, font, size.
call drawingnote.text.color.setcolor (255,0,0)
seems not working.
Autodesk Inventor Professional 2014
Autodesk Product Design Suite Standard 2013
Microsoft Office 2007 & 2013
Windows 7 64bit
Synergis Adept 2013
Visual Studio Express 2010
AutoCAD Inventor :: How To Change Thread Note From M12x1.75 To M12
Dec 1, 2011How can I change thread note from M12x1.75 to M12?
For our drawing standard, we don’t put the standard thread pitch into the thread note, and we have to manual to over write the thread note. But when the thread size changes and the note never get updated. Is there any other way to get the note to link to the thread size?
AutoCAD Inventor :: Hole Tolerance Does Not Change When Change It
Mar 1, 2013Trying to get the tolerance on a hole to be what I want. I changed the tolerance on the hole, but my idw did not change. When I went back and looked at the tolerance on the hole, it was back to the original value. No matter what I do, it will not change to what I want it to be in the part. Here is a short video.
The dimension I am changing is .9688 and it keeps jumping back to .9686 when I go back into the hole tolerance.
Tried other values too and they would not take either...
Entered Value Inventor Value
.9688 .9686
.9690 .9686
.9693 .9696
.9695 .9696
Windows 7 x64 -12 GB Ram
Intel i7-930 @ 3.60ghz
nVidia GTS 250 -1GB (Driver 301.42)
INV Pro R2013, SP1.1 (update1)
Vault Basic 2013
AutoCAD Inventor :: Change Units In IDW?
Apr 11, 2013I created an idw and annotated all the dimensions in default to inches. Is it possible to switch all of the units from inches to mm at one time? If so, how?
View 2 Replies View RelatedAutoCAD Inventor :: How To Change Lbmass Units
Aug 17, 2012My drawing template title block has a section for estimated weight. This value and overall size is used to determine shipping methods of our products. This value is pulled from the Type->Physical Properties-Model and Property->MASS. There is no option to turn off units. When our clients look at the drawing, they often get confused with lbmass unit. example; When someone asks what the weight of the product is, we dont say it is 1300 pound mass, we say it is 1300 pounds. I have looked around all different forums and found no complete answer or solution to this.
The only thing closest to a solution that I found on this forum is to create a rule that creates a custom iproperty within the model. [URL]........
You then have to create a text field in your title block that populates from that custom iproperty but can only be done when a base view is inserted from a model that has the custom iproperty rule applied.
From what I have tried, you can create a .ipt template to save you from creating that rule to create a custom iproperty each and every time, but to populate the title block field, a user needs to create that text field and draw from that custom iproperty once the base view is set on the drawing.
I also found a way to incorporate mass without units but the information will be put into the parts list. So instead of the weight being "automatically" entered into the title block after inserting base view, I could create a parts list for every drawing. (Not a good solution) [URL].........
One last solution that I found, is there used to be a tool called iProperty Collection[URL]....... that gave users the ability to customize some Inventor functions. One being the ability to change the unit displayed for MASS. I haven't tried using this tool because the last update off the website stated in 2009; says the software is not compatible with Inventor 2009 64bit, since I am using Inventor 2012 64bit, I think this is a dead end.
AutoCAD Inventor :: Change Von Mises Units?
Aug 6, 2012how can I change Von mises units, MPa ( Default) to another one?
View 3 Replies View RelatedAutoCAD Inventor :: Change Default Size Of Hole
Sep 23, 2013Somewhere in Inventor to override the default size when creating holes? I need to change the size of 3 mm to 4.2 mm.
View 1 Replies View RelatedAutoCAD Inventor :: Change Hole Type With ILogic
May 21, 2013I would like to know if it is possible to use iLogic to change the Hole Type from Through to Tapped as conditions dictate. Is this even possible? I already have a backup plan but wanted to check out all possibilites before I proceed. Using Inventor 2012 SP2.
View 1 Replies View RelatedAutoCAD Inventor :: How To Change The Defaults In Hole Table
Jul 16, 2013The hole table has a column named description, but in that column i want to change the defaults for the thread, i don't need the thread class, for example.
I can add or remove thread properties to the table, but i don't want to, i want to use the general Description column, which describes not only threads.
AutoCAD Inventor :: ILogic Rule To Change All Units?
Nov 25, 2012I am after a rule to change the unit type of all .ipts from cm to mm.
This has to go down to all levels in hierarchy but only change .ipt files
AutoCAD Inventor :: Change Units Of Measure In IProperties?
Jun 21, 2013Is it possible to change the units of measure in the iProperties from lbmass to tons for instance? I deal with very large, heavy concrete objects and tons is the way we show mass. Also use cubic yards instead of cubic inches.
View 7 Replies View RelatedAutoCAD Inventor :: Custom Table - Change Units With VB
Jun 18, 2012I am creating a custom table in a .idw through VB. I was looking for the code that would tell it to make a column have units formattng. For example, instead of my thickness to be 0.5, I want it to show 1/2 in. I know you can do this manually in the table editor, but I cannot find any bits of code that will do it in VB automatically.
View 1 Replies View RelatedAutoCAD Inventor :: Change The Termination Of An Existing Hole Feature?
Apr 30, 2013How can I change the termination of an existing hole feature?
If app.ActiveDocument Is PartDocument Then Dim doc as PartDocument doc = app.ActiveDocument Dim hole as HoleFeature hole = doc.ComponentDefinition.Features.HoleFeatures(1) ...End If
AutoCAD Inventor :: Change Document Units Using ILogic Rules?
Aug 23, 2012How do I change the document units using iLogic rules.
View 3 Replies View RelatedAutoCAD Inventor :: Unable To Change Units Of Tap Drill And Depth In IDW?
Apr 30, 2013Not able to change the units of tap drill and depth in .idw.
My part is in inch and the style too, is it a bug or a setting? I don't know...
Even if I change the style, custom of default, always the same.
AutoCAD Inventor :: How To Change The Units From English To Metrics Permanently
Jul 15, 2010Whenever I start a new part, I have to change the units in 5-6 clicks to metrics. And next time I have to do the same all over again.
Is there a way to do this permanently?
AutoCAD Inventor :: How To Change Default Units To Metric For 2013
Oct 22, 2012how to change default units to metric for inventor2013? Now I have them set as imperial.
View 3 Replies View RelatedAutoCAD Inventor :: How To Change Units To Metric In Material Editor
Oct 13, 2012How to change the units to metric in material editor? See attached picture
View 1 Replies View Related
