How can I change the termination of an existing hole feature?
If app.ActiveDocument Is PartDocument Then Dim doc as PartDocument doc = app.ActiveDocument Dim hole as HoleFeature hole = doc.ComponentDefinition.Features.HoleFeatures(1) ...End If
I want to use the Hole command to place tapped holes to hold a pair of shafts in place inside a part using setscrews. I can make the holes for the shafts without issue. While cutting the holes for the setscrews I thought I could use the "To" Termination option and select the shaft hole as the terminating plane. However, when I do this I get en error:
"The attempted operation did not find any intersection between the Toolbody and the selected 'To' termination face/plane. Change the termination definition or the feature (profile) position."
I can work around the problem by using the fixed "Distance" termination option but this is obviously inferior as it would require manual adjustment should the shaft holes need to be repositioned. Am I missing something?
I am trying to add a hole to an existing hole chart. I drop the part into a new drawing, set the ordinate "zero", and add a hole chart by selecting a few holes. When I attempt to edit the chart: click chart, right click "edit", click add hole, select new holes, right click to create, the "create" selection is greyed out and all I have to choose from is cancel. I searched the forum here but could not find a reference to this a know issue. Am I doing something wrong or is this a glitch of 2013.
We are running win7 x64 machines and this happens on both the 2013 Ultimate and Premium editions of the product.
I have created an iPart which uses the Hole Feature (counterbore hole). The hole is not threaded. Is there a way to put the Hole Feature into the iPart table so when a user enters specific values, he/she could type in or select a bolt size and the counter bore hole feature will use the correct dimensions for said bolt size (ie. I would like the counterbore holes for an M6 Socket Head Cap Screw. So instead of typing in the counterbore hole diameter, depth, and bolt diameter, etc... it would automatically enter the default values.) Or is this something that must use iLogic?
View 6 Replies View RelatedI have a problem with adding new points to existing opening.
I tried to use the method HoleCenterPoints.Add (??), But despite the lack of generating an error points are not added.
presenting a brief example of this functionality.
In ilogic it's easy to suppress features like holes, but I cannot combine iparts with Ilogic, so I try the same in VBA, but I don't know the way to do it
Is there some existing sample code like this ilogic one for VBA?:
if Dimension_A < 50 Then
Feature.IsActive("Hole1") = false
End if
Yesterday I tried to make a table-driven I-feature of a few drilling paterns.
I want to use this for drawing steel manifolds. The I-feature is used to insert standard drilling paterns, for example a patern to fit a standard flange.
The only problem is, for the thread I used the thread feature, otherwise it doesn't show up in the I-feature.
But when I make a drawing of a part were this I-feature is used, the specification of the thread doesn't show up when I create a hole table, because in the I-feature, the thread is a separate feature.
I just want to notice the Autodesk guys that when editing a hole feature in an assembly, then the sketch is hidden so that is not possible to pick more centerpoints. I noticed this when working with a sheet metal part, I don't know if its the same with a regular part.
Inventor 2012 SP1 / 64 bit
I am trying to link a hole feature in a part in an assembly with the number of a particular feature in another part within the assembly. I have a base plate part with a coutersunk hole feature that I want to pattern by linking it to the number of bosses in another part within the same assembly.
View 6 Replies View Relatedat assembly level hole feature shown only in assembly. how to create same feature at same position on parts.
View 5 Replies View RelatedIn order to reflect production process, I have to create holes on the bent pipe at assembly level after 2 bent pipes are welded to the straight pipe. Now when I suppress holes, it does not suppress only at LOD or view rep but throught the whole assembly.
Is it possible to suppress features such as hole using LOD or view rep, which are made at the assembly level? or I have to use another method? See below in highlighted.
I have a part with multiple holes created in a single hole feature (i.e. not patterned but made by selecting multiple sketch center points). As desired, the holes all have the same size since they all fit the same fastener. Is there a way to easily assemble fasteners to all the holes? Currently, I am using insert for each fastener and this gets tedius if there are many holes. Additinally, if the number of holes changes, a manual update is required. I'm hoping there is something that works similar to associative patterns.
INV 2013
If we require to create patterned holes thru a number of solids, this works great only requiring the one hole feature.
However, once an assembly is created with the parts, (these parts obviously have their own derived individual solids in them) when needing to place a bolted generated assembly to the patterned holes. It won't recognise the pattern.
So I've come to the conclusion that the bolted generator/drop place function really needs improvement for solid body modelling technique. (Mind you, the BG needs a complete rethink because its at about 50% complete).
What I can see needs to be added, is the functionality of the parts recognising the hole pattern. e.g. when using the make components function it gives an option to add a link to the hole feature.
My only other option at present is to create the holes within the assembly file and transfer the hole feature to each part file. This obviously loses the parametric functionality.
is there a way to use vb to add closed sketch loops to an existing feature?
I am trying to create a parametric template for a fan guard assembly, complete with drawings.
I am using an arrangement of circles defined using some linear sketch patterns as the cross-section of a revolved feature. Using ilogic/vb, I want to automate the number and spacing of items in the linear pattern, and then update the loops selected for the revolved feature.
I have found code on this forum (courtesy of Curtis Waguespack) that I can use to select all closed loops and create a feature. I can apply this code to create a NEW revolved feature, but I haven't been able to figure out how to use it to UPDATE an existing feature.
I need the feature to UPDATE rather than create new to maintain links in my assemblies and drawings.
Trying to get the tolerance on a hole to be what I want. I changed the tolerance on the hole, but my idw did not change. When I went back and looked at the tolerance on the hole, it was back to the original value. No matter what I do, it will not change to what I want it to be in the part. Here is a short video.
The dimension I am changing is .9688 and it keeps jumping back to .9686 when I go back into the hole tolerance.
Tried other values too and they would not take either...
Entered Value Inventor Value
.9688 .9686
.9690 .9686
.9693 .9696
.9695 .9696
Windows 7 x64 -12 GB Ram
Intel i7-930 @ 3.60ghz
nVidia GTS 250 -1GB (Driver 301.42)
INV Pro R2013, SP1.1 (update1)
Vault Basic 2013
I typically as much as possible like to insert my dimensions into my drawing from my model.
I created holes in the model as a 1/4" tapped hole
Yet when I show the dimensions in the drawing they show the minor dimension.
How do I get the 1/4" to show? I have selected the feature and still get these results.
Somewhere in Inventor to override the default size when creating holes? I need to change the size of 3 mm to 4.2 mm.
View 1 Replies View RelatedI would like to know if it is possible to use iLogic to change the Hole Type from Through to Tapped as conditions dictate. Is this even possible? I already have a backup plan but wanted to check out all possibilites before I proceed. Using Inventor 2012 SP2.
View 1 Replies View RelatedThe hole table has a column named description, but in that column i want to change the defaults for the thread, i don't need the thread class, for example.
I can add or remove thread properties to the table, but i don't want to, i want to use the general Description column, which describes not only threads.
See attachment. I can't get the units off of inch.
View 1 Replies View RelatedWhy the hole chart has commas instead of decimal points I don't know but how to change them?
View 5 Replies View RelatedUsing 2013 sp1.1...After I change the hole size in the part, the callout in my hole note does not update. (crazy, I know).
If I pull a new hole note after the change, it has the correct dimension. But, if I change the hole size again, this new hole note does not update.I put the part on a new idw and it updates correctly, so somehow the idw is hosed.
I've got a template with a set of Object defaults for an Inch drawing and a set for a Metric drawing. I've just noticed that within my metric set, if I insert a hole table with tapped holes, the font on the tapped holes doesn't match the other hole types. I'm searched around, but all the settings for the hole table style reference the same text style. (Please see the attached image.)
So is there a way to set a certain hole type to have a certain font or size within a hole table? Because if there is, I'd obviously like to remove it..... But I can't seem to figure out where the issue is.
I have had this problem intermittently for a few weeks since going to Inventor 2013 SP1.1. I have a part within an assembly and that part has holes created in it before assembling it with other parts. Now when I try and create a hole table in a drawing of the assembly I cannot select hole edges and the hole table is blank when trying to create it automatically from view selection. I originally thought it may be an alignment issue but I have since aligned everything correctly and it still persists. I can create the hole table if I import in just the part into the drawing but it will not allow me to create the table on the whole assembly.
I can also create the hole table if I use "centred pattern" and create cross hairs on all of the holes however it does not give me correct annotations for the holes as shown in attachment and I can manually change the annotations but seriously this should not be required. As shown in the screen shot it reads as A1 down to K1 instead of A1 to A10. .
Question: Is it possible to control the Hole Dimensions called out on the Hole Chart? As in controling leading/trailing zeros for main hole dim, alt home dim and tolerances? Can you combine the Main Dim with the Alt dim in a single column, separated with parentheses? (same with tolerance?)
View 5 Replies View RelatedI would like to use the hole command to place a hole in a part. When I place the hole it won't allow me to use one of the origin planes to locate the hole from. Can I only locate holes off edges?
View 4 Replies View RelatedI have an assembly that contains a part and a hole feature (the hole feature is at the assembly level). Using the api, I'm trying to get the hole location relative to the part's coordinate system in a without using the holeplacementdefinition.distance property, this way I can get the hole location regardless of the way it was defined.
View 2 Replies View Relatedi use hole feature names in hole table.
i assign hole names attribute to hole feature but dont get attribute hole table.
how to get hole names in hole table.
While creating holes in a part, a small counter shows (when you click on a point) of how many holes there are.
Programs:
Solidworks (1998-2011)
Autodesk Inventor (R8 - 2013)
Autodesk AutoCad 2D
Autodesk AutoCad 3D
Catia V5
SolidEdge
Anvil (Very old program!)
Pro/E
I'm chasing the syntax on what i hope is a very simple procedure.
We have a project for re-design and manufacture here (Australia) of a machine that has been designed and detailed in one of our US offices. For this reason, we will be wanting all dimensions in mm etc, rather than inch.
My intention is to open the idw(s), update the styles library (done, i think...), change the active standard to "AS Metric" (got the code sorted for that too), and then change all dimensions to AS Metric.
So far i have each of these 3 processes in a different sub, called from a master. But my problem is in changing the style. I could change a dimension's style to match that of another existing style:
Set oGeneralDimensions = oSheet.DrawingDimensions.GeneralDimensions.Item(1)
but I am having trouble setting is to the active style.
My module:
Sub ChangeStyle()
Dim oIDWDoc As DrawingDocument
Set oIDWDoc = ThisApplication.ActiveDocument
Dim oSheet As Sheet
Dim oDim As DrawingDimension
Dim oDimStyle As DrawingStandardStyle
Dim oGeneralDimensions As GeneralDimension
[Code]....
I want to change the selection method to feature priority.
Where is the button?
Not in the right click