AutoCAD Inventor :: Thread Feature Not Displayed In Hole Table
Nov 29, 2012
Yesterday I tried to make a table-driven I-feature of a few drilling paterns.
I want to use this for drawing steel manifolds. The I-feature is used to insert standard drilling paterns, for example a patern to fit a standard flange.
The only problem is, for the thread I used the thread feature, otherwise it doesn't show up in the I-feature.
But when I make a drawing of a part were this I-feature is used, the specification of the thread doesn't show up when I create a hole table, because in the I-feature, the thread is a separate feature.
View 1 Replies
ADVERTISEMENT
Mar 26, 2013
I have created an iPart which uses the Hole Feature (counterbore hole). The hole is not threaded. Is there a way to put the Hole Feature into the iPart table so when a user enters specific values, he/she could type in or select a bolt size and the counter bore hole feature will use the correct dimensions for said bolt size (ie. I would like the counterbore holes for an M6 Socket Head Cap Screw. So instead of typing in the counterbore hole diameter, depth, and bolt diameter, etc... it would automatically enter the default values.) Or is this something that must use iLogic?
View 6 Replies
View Related
Oct 4, 2012
I'd like to use an "NPT" Hole Dialog thread but it doesn't show up in the Thread type list.But it does show up in the Thread Dialog/Specifications Tab/ Thread type list so it's available.
I definitely have "NPT" in my Thread.xls & I have my Options/Files set to point to the correct Design Data folder.
Inventor Suite 2013 Ultimate
View 6 Replies
View Related
Apr 22, 2013
My colleague installed IV2013. He has excel 2010 installed in his PC also. However he cannot create thread hole (thread option is grey out).
View 4 Replies
View Related
May 16, 2013
I need to add thread to a hole but cannot do this under the edit command. How to do this ?
View 7 Replies
View Related
Nov 6, 2012
I've got a template with a set of Object defaults for an Inch drawing and a set for a Metric drawing. I've just noticed that within my metric set, if I insert a hole table with tapped holes, the font on the tapped holes doesn't match the other hole types. I'm searched around, but all the settings for the hole table style reference the same text style. (Please see the attached image.)
So is there a way to set a certain hole type to have a certain font or size within a hole table? Because if there is, I'd obviously like to remove it..... But I can't seem to figure out where the issue is.
View 5 Replies
View Related
Nov 19, 2012
I have had this problem intermittently for a few weeks since going to Inventor 2013 SP1.1. I have a part within an assembly and that part has holes created in it before assembling it with other parts. Now when I try and create a hole table in a drawing of the assembly I cannot select hole edges and the hole table is blank when trying to create it automatically from view selection. I originally thought it may be an alignment issue but I have since aligned everything correctly and it still persists. I can create the hole table if I import in just the part into the drawing but it will not allow me to create the table on the whole assembly.
I can also create the hole table if I use "centred pattern" and create cross hairs on all of the holes however it does not give me correct annotations for the holes as shown in attachment and I can manually change the annotations but seriously this should not be required. As shown in the screen shot it reads as A1 down to K1 instead of A1 to A10. .
View 7 Replies
View Related
Aug 28, 2013
i use hole feature names in hole table.
i assign hole names attribute to hole feature but dont get attribute hole table.
how to get hole names in hole table.
View 1 Replies
View Related
Jan 14, 2013
Aside from manually adding RH or LH to a hole note leader, any way of getting the HOLE Direction (left hand or right hand) into the leader note?
Windows 7 x64 -64 GB Ram, Intel Xeon E5-1620 @ 3.6 GHz
ATI FirePro V7800 2 GB, 180 GB SSD & 1 TB HDD, Inv R2013 PDS Premium SP2 Update 3 (Build 200), Vault 2013 Workgroup Update 2 (Build 17.2.9.0)
View 2 Replies
View Related
Oct 10, 2013
How can I go about editing the text for a holethread note? I want to proceed the default text w/ the quantity note.
E.g.: 7/8 THRU
What I want: ?X 7/8 THRU
View 3 Replies
View Related
Dec 29, 2011
What file do I edit to customize hole and thread notes?
View 4 Replies
View Related
Mar 1, 2013
I'm adding in inspection dimensions for a PPAP submission drawing and have found that I cannot set hole and thread dimensions as inspection dimensions. I'm quite surprised to find that this option isn't available. Is it there, just hidden, or is it really not available to me?
To the top right of this picture is the inspection dimension I want and to the left the thread dimension which I can't get into this format.
View 4 Replies
View Related
Oct 17, 2013
The Hole and thread notes command does nothing in a drawing.
I point to a thread hole, the mouse cursor changes to the right simbol but no note is generated.
View 5 Replies
View Related
Jul 15, 2011
I'm using Inventor 2011 and can't find any thread inserts in 'hole' command. Neither helicoil nor recoil - are they unavailable? Cose that would be a bit poor. Can I ****ch them on somehow?
View 9 Replies
View Related
Sep 10, 2013
In the part attached you can measure the hole diameter of the thread M20x2.5
It is 17.294, but the smallest diameter, the tap drill, in the Thread.xls file is 17.5
View 2 Replies
View Related
Oct 16, 2013
I have a part where I have placed a number of table driven iFeatures. These features generate parameters in the model that I can see in the parameter table. I am trying to find a way to have these iFeature parameters show up in the hole table in my drawing.
By 'exporting' the parameters, I have been able to get the values to show in notes and drawing view labels but I can't find a way to add them as a 'New Property' in my hole table.
View 3 Replies
View Related
Dec 27, 2012
Possible to add a thread feature to a part using iLogic.
Basically in the iLogic form if the user selects "Threaded Rod" the existing Extrusion is updated to reflect a cylinder with a length and diameter specified by the user and then I need to have a Thread Added to the cylinder.
Computer Specs:
Windows 7 (64 Bit) Pro. SP1, Inventor 2014 Pro, 3D Connexion SpaceNavigator (Driver 3.15.2)
Motherboard: ASUS Rampage IV Extreme x79 Socket 2011
Processor: Intel Core i7 Six Core Sandy Bridge-E 3.2GHz OCed to 4.7GHz (Under Water)
RAM: G.Skill Ripjaw Z-Series 32 gig quad channel of RAM 1800MHz OCed to 2133MHz
Video Card: 2x Nvidia Geforce GTX 770 (Running Six (6) Monitors)
Monitors: [Primary = 2x 24in HD WS][Secondary = 2x 22in HD WS][Tertiary = 2x 19in FS]
Primary Hard Drive: OCZ Vertex IV 256 GB Solid State Drive
Secondary Hard Drive: OCZ Vertex III 120 GB Solid State Drive
View 1 Replies
View Related
Dec 5, 2013
Is it just me, or did the Drawing View Thread Feature option get switch to default OFF, where it used to be on? Did I do something on accident to make this happen? how I can get it back by default?
Inventor Professional 2014
Windows 7, x64
Dual-core i7, 8GB RAM
NVIDIA Quadro FX 880M
HP Elitebook 8540w
View 2 Replies
View Related
Sep 23, 2010
i get an error message telling (invalid thread data table. Please check Thread.xls file.i tried to reinstall the windows and the autodesk inventor but the error keep appearing.
1.my os is windows xp sv2 32 bit
2. inventor version is 2011 32 bit i also had the same problem with 2010
3. i tried to reinstall without any antivirus on my pc but i still have the same problem
4. what's a UAC?
5. yes i've office 2007 installed & i had tried with office 2003 but also the same problem.
1 the first time i used, i made the bolted connection once, but at the second time i kept having this issue.
2 my last trial was installing a freh copy of the windows then install office and the inventor only but nothing changed
3 i tried to install the inventor on another pc but i also had the same issue
4 i searched the c drive for the file THREAD.xls, and i found three of it and i guess they are fine.
View 5 Replies
View Related
Nov 17, 2013
how can i make a thread feature in machining environment after welding operation?
View 1 Replies
View Related
Oct 31, 2012
I've attached an example of a workflow we use to make different instances of products.part1 gets assembled in assembly1 which then gets derived in part2 to receive a bend.We use assembly1 in one place and part2 in another.(this is a simplified example, made with IV2013 SP1.1)
In part1, if you add the thread feature, the "bend part" feature in part2 fails after updating.This also happens if you try to add a "bend part" to part1 AFTER the thread feature, if the bend is present beforehand it does work.
Having the bend before the thread feature in part1 doesn't work with our workflow, because we need the assembly1 to be straight.In short, the thread feature is causing problems with "bend part".
I can't say if this problem was present in previous versions or even in the previous service pack since we don't use this workflow that often, especially with threaded parts, but i hope this can get fixed with a hotfix.
Using IV2014 Pro SP1 update 1, Win7-64bit
View 9 Replies
View Related
Jun 13, 2012
I recently installed Inventor Premium 2012 and I am not able to make a bolted connection or creat a tapped hole. I get this error message: Invalid thread data table. Please check Thread.xls file.".
View 4 Replies
View Related
Jun 22, 2012
I have a problem with adding new points to existing opening.
I tried to use the method HoleCenterPoints.Add (??), But despite the lack of generating an error points are not added.
presenting a brief example of this functionality.
View 1 Replies
View Related
Feb 7, 2012
In ilogic it's easy to suppress features like holes, but I cannot combine iparts with Ilogic, so I try the same in VBA, but I don't know the way to do it
Is there some existing sample code like this ilogic one for VBA?:
if Dimension_A < 50 Then
Feature.IsActive("Hole1") = false
End if
View 4 Replies
View Related
Apr 23, 2012
I have a drawing of a sheet metal part that I did late last year. I used a Hole Table to dimension all the holes.
Fastforward to today. I added two holes that are different in size than any other hole. So when I opened the drawing it automatically added them to the Hole Table and gave them tag #'s in a new group and it kept the grouping in Alpha order. A, B, C were there before and it added D. Great, that's the way to do it.
Then I decided I needed to change the hole size. The change would keep the size different than any other hole on the part still. I go into the drawing and it change the size in the Table BUT, it also moved them up to the top of the list but kept the tag # as D*.
How do I get those two entries back to the bottom where they belong to keep them in order?
View 1 Replies
View Related
Jan 6, 2012
I just want to notice the Autodesk guys that when editing a hole feature in an assembly, then the sketch is hidden so that is not possible to pick more centerpoints. I noticed this when working with a sheet metal part, I don't know if its the same with a regular part.
Inventor 2012 SP1 / 64 bit
View 4 Replies
View Related
Apr 30, 2013
How can I change the termination of an existing hole feature?
If app.ActiveDocument Is PartDocument Then Dim doc as PartDocument doc = app.ActiveDocument Dim hole as HoleFeature hole = doc.ComponentDefinition.Features.HoleFeatures(1) ...End If
View 2 Replies
View Related
Feb 22, 2012
I am trying to link a hole feature in a part in an assembly with the number of a particular feature in another part within the assembly. I have a base plate part with a coutersunk hole feature that I want to pattern by linking it to the number of bosses in another part within the same assembly.
View 6 Replies
View Related
Dec 18, 2013
Is there a way in the description field of an Inventor hole table to have mixed units? Some hole sizes at fractions, some at 2 plc, and others at 3 places.
Inventor Pro 2013 or 14
View 1 Replies
View Related
Nov 8, 2012
I created hole table but i unable to merge the cells. but i need my output will be as per the input. How to make sure it is possible to give inventor 2011 & 2012.
View 6 Replies
View Related
Jul 16, 2013
The hole table has a column named description, but in that column i want to change the defaults for the thread, i don't need the thread class, for example.
I can add or remove thread properties to the table, but i don't want to, i want to use the general Description column, which describes not only threads.
View 3 Replies
View Related
