i get an error message telling (invalid thread data table. Please check Thread.xls file.i tried to reinstall the windows and the autodesk inventor but the error keep appearing.
1.my os is windows xp sv2 32 bit
2. inventor version is 2011 32 bit i also had the same problem with 2010
3. i tried to reinstall without any antivirus on my pc but i still have the same problem
4. what's a UAC?
5. yes i've office 2007 installed & i had tried with office 2003 but also the same problem.
1 the first time i used, i made the bolted connection once, but at the second time i kept having this issue.
2 my last trial was installing a freh copy of the windows then install office and the inventor only but nothing changed
3 i tried to install the inventor on another pc but i also had the same issue
4 i searched the c drive for the file THREAD.xls, and i found three of it and i guess they are fine.
I recently installed Inventor Premium 2012 and I am not able to make a bolted connection or creat a tapped hole. I get this error message: Invalid thread data table. Please check Thread.xls file.".
Yesterday I tried to make a table-driven I-feature of a few drilling paterns.
I want to use this for drawing steel manifolds. The I-feature is used to insert standard drilling paterns, for example a patern to fit a standard flange.
The only problem is, for the thread I used the thread feature, otherwise it doesn't show up in the I-feature.
But when I make a drawing of a part were this I-feature is used, the specification of the thread doesn't show up when I create a hole table, because in the I-feature, the thread is a separate feature.
I'd like to use an "NPT" Hole Dialog thread but it doesn't show up in the Thread type list.But it does show up in the Thread Dialog/Specifications Tab/ Thread type list so it's available.
I definitely have "NPT" in my Thread.xls & I have my Options/Files set to point to the correct Design Data folder.
I can drill a hole as needed, but can't thread a hole at all. Not with the Tapped Hole function when drilling the hole, or after drilling the hole then using the Thread Tool. Inventor will just not let me create threads this way outside of cutting a coil.
I am trying to add a thread class to the thread.xls. (that part is ok)
The thread is M26x2.0
I can't seem to find any information for me to simply plug in the values into the .xls, so I am thinking that I have to crunch some numbers. which is fine. I just want to make sure that this image below is the correct the reference for this task.
using the pitch, I should be able to calculate all my min and max values, but the xls has class column and a tap drill column, how would I determine these values??
Is it possible to embedd data in a table so that a user can select from a group of data within one cell?
I use this technique quite often in Excel. One cell in a table can have various values: A, B, C, or D. While another cell can have a different set of values to choose from: BLUE, RED, ORANGE, or PURPLE. The user can pull down an arrow (similar to a dynamic block) and choose from a set list of values.
I had a hdd crash, I took the hdd to data recovery and they did recover something but some of the important dwg files are invalid.
From my understanding, computers use two files: pagefile.sys and hiberfil.sys to store data used at a given time, for quick access (and other reasons). I have these files from the broken hdd but I don't know how to open them.
How they can be opened? How to successfully recover dwg files from them? the computer does it all the time so there must be a way.
Is it possible to add data to a feature data table? Example: The shape file data downloaded from NRCS only has the Soil number for the State. As I check out features I would like to add data for the soil name, soil group, etc. as additional columns in the data table and have it available in the future by checking the feature back in to my local information.
Is that possible to read the Autocad Table data , without opening the Autocad from VB.NET. I tried with opening one autocad then loading the source dll. it was working perfectly.
But i need to without opening a application its possible or not?
I am working on a co-ordinate utility that utilises data extractions. I am able to extract the data that I want to an XML file, but how do I create a dxe file and link it to a table? I have found the WizardSettings has a table style, but that is as far as I have reached.My code is below.
using Autodesk.AutoCAD.ApplicationServices;using Autodesk.AutoCAD.DatabaseServices;using Autodesk.AutoCAD.DataExtraction;using System.Collections.Generic;using System.Data;using System.IO;using AcApp = Autodesk.AutoCAD.ApplicationServices.Application;namespace acmCoordinates { public class DataExtraction { const string outputXmlFile = @"c:empdata-extract.xml"; public static void. [code]....
Most people that I work with don't use autocad map, they use the regular Autocad. So they can not access the table data of my vectors. Is it possible to transform the table data that I choose and place it as text in the appropriate place ?
I work in architecture, and every time i create an opening (door, window) i add a block next to it with an attribute to the reference number
I was wondering if it would be possible when creating that little block to give it more information and later on extract the information from it to a table Ex: door 106-02, steel finish, 3'x7' , isolated, steel frame, 2" thick etc.
I have a table in excel and I'd like to have text in cells link to nodes on a map.
i.e. I have the traffic volume of a road section in a table. I'd like to show that volume on a map beside a circle where the count was taken. I'd like to be able to update the table value and have it also update on ythe map.
I am using data extraction and data linking to an excel file to count blocks and list details. I need to be able to update automatically and the most trouble I have been having is that I need the images of the blocks to come out in the table as well. so far only have been able to get the text data to come out in the table.
I utilize Excel to build BOM's. I import them through data connection, I than will tell it which cells are Headers / Data / Titles. At which point text sizes / styles ... are applied.
Problem,
I have a cell that is enlarged with small text in the middle. I can orientate the boxes to increase in the Vertical or Horizontal directions larger than the original Excel Data File but i cannot get them to shrink?
I want .05" on the left / right of the widest data, and .02" on the top and bottom. If i change Vertical to .02 it puts the text at the top of the cell.. but if i put it at 1, it enlarges the cell and places it in the middle.
Horizontal i want .02 from the left, but if i align left it goes all the way to the left line.
Can a table format re-define an external excel spreadsheets cell lengths? Obviously taking into account if Wrap text is Enabled it takes the width and defines only the height?
The angle or radius are outside the table boundaries. I have used bend tables before and have not run into this. See screenshot. What I don't understand is that in the error dialog box the Thickness is correct the Radii are correct and the Angle is correct except it is showing a -90 degrees. Is that the problem? The negetive? Why is it showing a negative number. I can't change the way the part is formed. The problem seems to be with the lower left hand curl. It does go ahead and flatten it, but I don't trust the results when I have the three errors.
You can organize a multi-threaded work with data through Inventor API? For example, there is a assembly and I need the first part of assembling a list of items to consider in a data set, the second part of the list - in the second data set, the third - the third and so on up to N, where N - depends on how many threads can run in the system . Whether these flows are processed and to receive data in parallel? Or go to the consistent implementation of this algorithm will first be processed by the first part, and only after it will start the second ...?
I am having a terrible time getting the thread modeler to work correctly for an M16x 1.5 thread. I have tried multiple approaches to get the correct thread dimensions output.These are the steps I take:
1) Create hole (I've used both major and minor thread diameters,16mm and 14.376mm)
2) Apply Inventor threads (M16 x 1.5)
3) Select threads from tree using the Add-in thread modeler "Controller"
4) Analyze dimensions finding both cases yield the wrong dimensions.
This add-in would be very useful and a great time saver if it would work correctly.
I have recently installed Inventor 2013 Professional Ultimate and am having some issues. I can not seem to get the Thread function to work. When I go to apply a thread I get the follow error....
When I go to search the directory, I find that the Thread xls document is infact there, but it is not located where the program thinks it should be (XLS Folder --> en-US Folder)
I also made sure that the Design Data location was correct within the Application Options...
I have a part where I have placed a number of table driven iFeatures. These features generate parameters in the model that I can see in the parameter table. I am trying to find a way to have these iFeature parameters show up in the hole table in my drawing.
By 'exporting' the parameters, I have been able to get the values to show in notes and drawing view labels but I can't find a way to add them as a 'New Property' in my hole table.
