AutoCAD Inventor :: Bend Table Error / Angle Or Radius Are Outside Table Boundaries
Mar 15, 2012
The angle or radius are outside the table boundaries. I have used bend tables before and have not run into this. See screenshot. What I don't understand is that in the error dialog box the Thickness is correct the Radii are correct and the Angle is correct except it is showing a -90 degrees. Is that the problem? The negetive? Why is it showing a negative number. I can't change the way the part is formed. The problem seems to be with the lower left hand curl. It does go ahead and flatten it, but I don't trust the results when I have the three errors.
View 1 Replies
ADVERTISEMENT
Oct 16, 2013
I have a part where I have placed a number of table driven iFeatures. These features generate parameters in the model that I can see in the parameter table. I am trying to find a way to have these iFeature parameters show up in the hole table in my drawing.
By 'exporting' the parameters, I have been able to get the values to show in notes and drawing view labels but I can't find a way to add them as a 'New Property' in my hole table.
View 3 Replies
View Related
Apr 26, 2013
How can I change the minimum radius table if Autocad Civil 3D only have as a minimum 4%?
And I need to use as a minimum 2%. see attached picture.
View 3 Replies
View Related
Jul 23, 2013
Just created a 2nd drawing sheet in my IDW, and when i place a revision table it is missing most of the data that is shown on sheet 1. All i get are the description column entries, nothing else.
View 9 Replies
View Related
Jun 13, 2012
I recently installed Inventor Premium 2012 and I am not able to make a bolted connection or creat a tapped hole. I get this error message: Invalid thread data table. Please check Thread.xls file.".
View 4 Replies
View Related
Oct 21, 2011
I have been trying to bend a larger radius on a corner bend but i can not seem to be able to . I start out with a face of 46" x 82" i want to put a 1/2" bend up then a 1/2" bend out to make a z shape i'm using as a material .109 stainless steel and i want to end up with a 1/2" on the inside corners so that when i'm done i can flatten it out to get the proper sheer size for the piece the metal brake i'm using has a 1/2" die in thats why i trying to figure this out is their any way to put this kind of radius on the sheet metal bends.
View 2 Replies
View Related
Dec 17, 2012
I have created an alignment and I would like to create a table that includes this information: station, northing, easting, bearing, deflection angle, deflection left or right, and length. So far I have not found any option to include the deflection angle to the next PI in a table.
View 4 Replies
View Related
Aug 28, 2009
what this error message means. I cant find any reference to it in the help files.
View 9 Replies
View Related
Feb 27, 2012
Is there a way to preload information into Inventor in regards to the break press such as the dies being used or the ones available so the when the computer is deciding a bending radius,it know what tool we have?
Currently the bend radius is set to "radius", which i am assuming is default, but I can't figure out how to change that either, and depending on the thickness it will change, but like today it said I would need a 1/16th inch radius, but we don't have a 1/16th inch die,it is an 85 degree air bending setup,and has a 4 way die with smaller and bigger openings.
View 4 Replies
View Related
Mar 14, 2013
In our company, we put Excel tables in our drawings. The reason we've chosen for Excel-tables is that we can adjust the layout of the table quite easily. These tables consist of grouped cells in a particular company-specific layout. We select the range of the desired cells, copy and paste them in our AutoCAD drawing. This drawing is sent to our customers. The disadvantage of this method is, that when our customers (who use CAD-software of other brands) open the dwg, they don't see the table, but some kind of picture of the table.
Is there a way to 'explode' the excel-table, but keep the specific layout of the table? For attributes in blocks there's the 'Explode Attributes'-command in the Express-tools, but is there something similar for Excel-tables?
Product Design Suite 2014
Inventor 2012 SP2, Vault 2014
HP Workstation Z220
Intel Xeon 3.4GHz
16GB RAM
Nvidia Quadro 4000
Windows 7 Professional (64bit)
View 2 Replies
View Related
Feb 23, 2012
Is there a way to force the table and table text height to stay constant despite the scale? I can do it for Point Label Styles with an Expression. But in 2011 there is no way to build an expression for a table style.
I want to create tables in the drawing where the points are and then plot them from a drawing they're Xrefed in to. The tables are too small but zooming in doesn't make them any bigger because the scale of the viewport changes and they adjust.
View 4 Replies
View Related
Dec 9, 2011
Having an issue trying to join an access table to a shp file attribute table. I want to use the access table to cross reference the shp file for matching parcel numbers. I have attached the access table in the ODBC using a data source name however it seems to not give me the option to view any records.
View 2 Replies
View Related
Dec 31, 2013
I have a large number of parts that are set with a "2mm" Bend Radius.
1. I wish to change it to "1.5mm" but manually takes time . Ways to automatize this?
2. What Bend Radius is recommended to be used for steel sheets (1.5 ; 2; 4; 5 mm).
View 5 Replies
View Related
Jul 19, 2013
The attached image shows a table that I created as a AEC Object from my Civil 3D Alignment (i can turn it to 'MText' and then 'Text' in one or two steps). What I need is a routine, or anything, that fills the third column with an information based on the second column: the deflection angle, something like that:
Curve Angle Type of angle
C1 22°30'00'' 2
C2 39°21'28'' 3
C3 44°59'59'' 3
C4 45°00'00'' 4
C5 45°00'01'' 5
Is there something I could read to study to solve it myself and specify my own angles/types of angles?
View 7 Replies
View Related
Feb 18, 2013
I want to know if you can link AutoCad tables to other Autocad tables on different layouts. Say I have ten sheets, each with a table for quantities of pipe length, and one sheet with a total of all quantities. Can I link cells from each separate layout sheet to the main table sheet, so that I can add them all for project totals?
View 3 Replies
View Related
Nov 20, 2012
I am wanting to use an Autocad table object to display fields from an Access database table that is linked to symbols in my drawing.
My objective is create a database table that has detailed notes for call outs in my drawings and then link my call out blocks to the database table and display the blocks and linked descriptions in an Autocad table. If the notes in the database table are edited the Autocad table updates with the new the description from the database.
View 1 Replies
View Related
Dec 13, 2013
How can I export a excel table to Autocad not as an OLE object but as a Audocad table?
View 7 Replies
View Related
Mar 13, 2012
I wrote an app some time ago that swaps out user parameters that drive sheet metal thickness and bend radius.
it appears to work about 60% of the time when it doesn't it does not give any warning but even though the FX table shows the new user parameters driving thickness and bend radius the "sheet metal defaults dialog" thickness input box is grayed out and shows no value what so ever. Clicking the Edit Sheet metal rule to display the "Style and Standard Edtior" the Thickness and Bendradius still show the Old userparameters. See attached Pic.
I am setting the parameters as follows.
Replaced "Chan_Th" with "chn_thk" in FX Userparameters
then...
[Code]
oSheetMetalCompDef.UseSheetMetalStyleMaterial = True oSheetMetalCompDef.ActiveSheetMetalStyle.Thickness = sThick
[/Code]
As you can see FX reports the change but sheet metal settings does not.
This code appears to work or not at random.
View 7 Replies
View Related
Dec 31, 2013
Say I had two tables located within AutoCAD, can I make it to where if I put data in one cell of one of the tables that it could automatically populate in a different cell in the other table? Also if this can be done, could it be done linking the data in-between separate layouts?
View 9 Replies
View Related
Jan 18, 2012
Is there a way to setup vertical alignment of text in a cell for the entire table, when using Table Tool? It is possible for a single cell, but when selecting a table (or multiple cells) this option is not available.
View 5 Replies
View Related
Dec 11, 2013
I have a short macro to add the compliment angle to all the bend angles on an Inventor 2014 drawing. I want it to always show one decimal point on the compliment angle, but if that would be '0' then it doesn't show it. I.e. in the attached picture I want it to be 58.0 (122.0) DOWN.
Sub Test()
Dim oDoc As DrawingDocument
Set oDoc = ThisApplication.ActiveDocument
Dim oView As DrawingView
Set oView = oDoc.ActiveSheet.DrawingViews(1)
Dim oNewDimStyle As DimensionStyle
Set oNewDimStyle = oDoc.StylesManager.DimensionStyles.Item("RASOR")
[code]....
View 6 Replies
View Related
Oct 26, 2011
I want to create a 3D model for a metal frame I bought commerically. To create the model in Inventor, I need to know the bend angle such as the one shown in the first figure of:
[URL]
What kind of tool do I need to measure the bend angle of the real metal frame reasonably accurately?
In Inventor, is there an easy eay to create the teeth of the servo horns?
[URL]
View 2 Replies
View Related
Feb 13, 2012
We have a whole bunch of spreadsheets that we use for calculations and parts of those spreadsheets are linked to a ton of CAD Drawings via data links.
We would like to be able to deliver the CAD drawings to the client without having to send our calculation books (just the output tables). In other words, is it possible to embed the table data and remove the excel link for the final delivery?
View 3 Replies
View Related
Mar 22, 2012
By running this routine it returns the following error message:
ERROR: bad argument type: VLA-OBJECT 7
(defun _make_tblstyle (stlname / adoc acmcol tblstyle txh)
(setq adoc (vla-get-activedocument
(vlax-get-acad-object))
)
(setq acmcol (vla-getinterfaceobject
[Code] .......
View 3 Replies
View Related
May 20, 2013
Is there any way to resize the gizmo within the bend modifier so that I can change the bend to a different radius? Or is the bend radius dependent on the size of the piece its bending?
Windows 7
AMD A-6
4 GB Ram
View 1 Replies
View Related
May 16, 2012
Why does the table wrap like this (see attached)?? Shouldn't it place the wrapped rows on the bottom?
View 6 Replies
View Related
Sep 20, 2011
I draw ventilation ductwork all day at work, just recently stumbled across dynamic blocks.
Attached is what i have done so far, the straight section works perfectly, just having some trouble with the radius bend. What I need is for the arc to stretch with the angle of the bend.
TEST.dwg
View 5 Replies
View Related
May 6, 2013
I'm simply trying to delete the revision table if it exists on a drawing. I did find where you can't do anything with Rev Tags with the API, but what about the Actual Revision Table?
Trying to get this to work;
If iProperties.Value("Project", "Revision Number")>0Dim oRevTable as RevisionTableoRevTable = ActiveSheet.Sheet.RevisionTable.Item(1) oRevTable = nullRevisionTable
View 2 Replies
View Related
Oct 11, 2011
I 'd like to keep the old Revision table rows available , but off the sheet rather than delete all the rows & start from , let's say, Rev 10.Is this possible in 2012?
Inventor Suite 2013 Ultimate
View 6 Replies
View Related
May 31, 2013
Is it possible to add a Appearance tab to a Ipart table? I am cataloging a set of parts and one part is made with steel but in Gloss - Black and Matte - Black and i'd like to differentiate the 2 without haveing to make 2 seperate Ipart files.
View 2 Replies
View Related
Jun 25, 2010
I have created some reference points on a part. I have a need to include a table on the drawing of this part that shows the x,y,z coordinate positions of each of those points relative to the coordinate system origin. I have been trying to figure out a way to extract this information from the part to create source data to place into a table on the drawing.
View 3 Replies
View Related
