By running this routine it returns the following error message:
ERROR: bad argument type: VLA-OBJECT 7
(defun _make_tblstyle (stlname / adoc acmcol tblstyle txh)
(setq adoc (vla-get-activedocument
(vlax-get-acad-object))
)
(setq acmcol (vla-getinterfaceobject
[Code] .......
My code returns the error, but it still works.
(vl-load-com)
(setvar "cmdecho" 0)
(vlax-for ucs (vla-get-UserCoordinateSystems (vla-get-Activedocument (vlax-get-acad-object)))
(setq UCSList (cons (vla-get-Name ucs) UCSList)))
(setq FileName (vl-Filename-Base (getvar "Dwgname")))
(setq NewUCSList (vl-remove-if '(lambda (x) (vl-string-search FileName x)) UCSList))
(setq Listlength (length NewUCSList))
[code]....
I discovered yesterday my burst lisp routine isn't working. It gives the following error message:
bad argument type: VLA-object collection: #<VLA-OBJECT 0971e1d4>
The routine does not appear to have changed. But here is the
(Defun C:BURST (/ item bitset bump att-text lastent burst-one burst BCNT BLAYER BCOLOR ELAST BLTYPE ETYPE PSFLAG ENAME ) ;----------------------------------------------------- ; Item from association list ;----------------------------------------------------- (Defun ITEM (N E) (CDR (Assoc N E))) ;----------------------------------------------------- ; Error Handler ;----------------------------------------------------- (acet-error-init (list (list "cmdecho" 0 "highlight" 1 ) T ;flag. True means use undo for error clean up. );list );acet-error-init ;----------------------------------------------------- ; BIT SET ;----------------------------------------------------- (Defun BITSET (A B) (= (Boole 1 A B) B)) ;----------------------------------------------------- ; BUMP ;----------------------------------------------------- (Setq bcnt 0) (Defun bump (prmpt) (Princ (Nth bcnt '("
-" "
\" "
[code]....
I'm trying to open a file to write to on my external drive, I get this message "bad argument type: stringp nil".
View 8 Replies View RelatedI am looking for a way to change the text style used by a table style with Visual LISP. So far I have been able to get the IAcadTableStyle object from the acad_tablestyle dictionary, but there is no property for text style. Is this even possible? Code and results are below.
(defun DumpTableStyles ()
(setq dict (vla-get-dictionaries (vla-get-activedocument(vlax-get-acad-object))))
(setq TableStyles (vla-item dict "acad_tablestyle"))
(vlax-for TableStyle TableStyles
(vlax-dump-object TableStyle)
)
)
[Code]....
Is it possible to create a lisp that would change the plot style table? I don't know of any variable to type to change that. We convert drawings from Solid works to AutoCad and use the basic monochrome plot style. I'd like to easily change that since the act of doing that is repeated many times.
View 1 Replies View RelatedThe attached image shows a table that I created as a AEC Object from my Civil 3D Alignment (i can turn it to 'MText' and then 'Text' in one or two steps). What I need is a routine, or anything, that fills the third column with an information based on the second column: the deflection angle, something like that:
Curve Angle Type of angle
C1 22°30'00'' 2
C2 39°21'28'' 3
C3 44°59'59'' 3
C4 45°00'00'' 4
C5 45°00'01'' 5
Is there something I could read to study to solve it myself and specify my own angles/types of angles?
I am trying to customize my quick properties (acad.cuix), but i keep on receiving fatal error message. And when i click on quick properties it is all blank. Also, the Properties dialogue box is not working when i click on something, the properties do not appear on the Properties dialogue box. Attached is the error message.
View 3 Replies View RelatedIs there a way to toggle between customized old style menus and new style workspaces?
View 1 Replies View RelatedIs there a way to programatically set a visual style before a drawing actually opens?
We have some huge models and people seem to forget to change their visual styles back to 2D wireframe before saving and exiting drawings. Some models will crash on some workstations when trying to open in a rendered mode.
I found a lisp with a function that looked to set viewport visual styles. But it does not seem to be supported anymore. --> (vla-put-VisualStyle vport 1)
I have set up several tables inside autocad that have one cell as the input cell and after regen the others perform calculations based on that cell. I want to write a command that uses the same value as the input value to draw the arc to scale. I tried using the table value as is called out in the cell field:
^C^C_arc 36,6;e;0,6;r;Table(8796085192704).A3;.
Is there anyway to get a value from a cell inside autocad and put it into my macro so I can draw an arc of the radius shown?
I have the following code to delete all hatch in a drawing. At the end of the command there is a notice that all hatch have been eliminated.
However, the last message displayed is: "Hatch boundary associativity removed".
(defun c:deletehatch ( / d l )(vl-load-com) (setq d (vla-get-activedocument (vlax-get-acad-object))) (vlax-for a (vla-get-layers d)(if (eq :vlax-true (vla-get-lock a))(progn(vla-put-lock a :vlax-false)(setq l (cons a l)) ) ) ) (vlax-for b (vla-get-blocks d)(if (eq :vlax-false (vla-get-isxref b)) (vlax-for o b (if (wcmatch (vla-get-objectname o) "AcDbHatch")(vla-delete o)) ) ) ) (foreach a l (vla-put-lock a :vlax-true)) (vla-regen d acallviewports) (princ (strcat "All HATCH have been removed")) (princ))
Is it possible to include a hyperlink with an alert message. I'm not finding any information.
I already know about VLA-LAUNCHBROWSERDIALOG, but I'd rather not launch two dialogs if not absolutely necessary.
I was wondering if there is a way to have a message such as the following show up when a lisp routine was loaded using "Load Application" in ACAD?
1) Load Application "ZAP"
2) lisp routine is successfully loaded and the message "Type ZAP at the command line to initiate ZAP routine"
The PARTS LISTS on our old drawings are simply text entities and lines. Some are MTEXT. But our new drawing template has us creating our parts list using the actual AutoCAD TABLES entity.
I'm looking for the best method to go from lines and text in AutoCAD, to an AutoCAD table. As of now, I have to retype everything since I can't select a column/row or group of text entities, copy/paste into a table.
Any LISP function that will allow me to go from TEXT and LINES to a TABLE? I've tried B2E (lisp name) but it's not working - found that on a lisp site somewhere.
I need to draw a table with point number, easting, northing, elevation for a lot of points and need a lisp to read the xl spreadsheet and draw the table.
View 9 Replies View RelatedIs there a way to unlock a cell using lisp. I have a datalink that is used to create a table. Once the table is selected I have a command that will format some of the cell style (which will let me while locked), but it I cannot seem to find a way to unlock them to merge a couple of cells. I can manually do it using the table toolbar, but programmably I am a little stuck. I can see if it is editable by using the vla-iscontenteditable and it will return :vlax-false. I do not see a vla-setcontenteditble or something to that effect.
View 3 Replies View RelatedTables do no have a rotation angle. I can find the insert point, but there is no other point to make an angle calculation with.
(setq objTable (vlax-ename->vla-object (car (entsel))))
(vlax-dump-object objTable T)
I have a table, in cell D3 I have inserted a field containing a system variable. The contents of the cell looks like this,
%<AcVar dimadec>%
I want to put in cell D2 the name of the vairable that is in cell D3 - I have tried the following,
%<AcExpr (D3).ObjectName>%
%<AcExpr (D3).textstring>%
Is there any way to reference the name of that system variable contained in cell D3? I want to do this to prevent errors by curious new users that may edit the table, I want the table to reference itself so that the system variable being read is always related to the correct system variable name.
any code that can search for a layer using wildcards?
In my specific case, I have multiple layers than begin with "MECA" followed by a job code. I'm trying to code something that will check to see which of those layers is on, then return the layer name.
i have one table make which field from block. Is possible sum?
View 4 Replies View RelatedIs there any way to compare 2 cells in a table? I have tried diesel
$(if,$(EQ,%<AcObjProp Object(%<\_ObjId 2128896328>%).b2>%,%<AcObjProp Object(%<\_ObjId 2128896328>%).d2>%),true,false)
I can't seem to pass the cells into the equation. I tried formulas also with no luck.
I'm trying to include the Autodesk 360 SP1 in my 2014 deployment. Its working fine but it prompts for a restart and I'd rather not require user action to complete the install. (the users here restart frequently enough to deal with this anyway)
I have tried the following switches in the parameters section to no avail:
/s /qn
/s /v/qn
/s qn "REBOOT = ReallySupress"
/s /v/qn "REBOOT = ReallySupress"
I would like to link an AutoCAD table to an Excel file with the first method described in this page:
[URL]
I know the filename of the Excel spreadsheet and the range as well.
Is there a way to make a script that links the table and then detach the link after that ?
I have created subroutines to build tables in AutoCAD.
What I would like to do is to is if a value in the table list (example a question mark), then make the background color of that cell color 1 (red).
List to insert as a table -
(setq List_Table (list (list "A" "?" "C" "D" "E") (list "11" "12" "13" "14" "15") (list "21" "22" "23" "24" "25")))
(Build_Table "Title" List_Table 3 5 0.1 1)
Here are the subroutines -
(defun Build_Table (TableName List_Table NumRows NumColumns RowHeight ColWidth /); P0 Table_Obj KW KK KT KL Blocks_Obj Block_Obj Block_Id)
;--set table scale-------------------------------------
(setq Dscale 1.0)
;--get location----------------------------------------
(setq P0 (vlax-3d-point (getpoint (strcat "
[Code] .......
How to modify the column widths of an ACAD_TABLE?
I have known co-ordinates that I want each grip for the table to be set at. I can't just copy and paste the table from drawing to drawing. Each table of each drawing have different textual values, and the column widths will best be sized for each text value.
Any LISP routine that I can run that will make alternating rows of color in a table?
I can setup a table with the TABLE command and setup the rows to alternate gray and white, but if I add or delete a row, the alternating background fill pattern gets messed up (see attached example). Manually redoing the pattern isn't bad for a few rows, but for 30 or more it's a real pain.
If I could run a command that would activate a routine that would start with gray at the top and then alternate white and gray for every row for the rest of the table, that would be awesome.
I want to change a lot of table cell text in one time, try to explain something.
In the front of my drawings i have a view tables. in the second column stays a code that represent a location.
e.g. LVC stays for Low voltage cubicle. Now it is my intention to substitute these code to the description of code in one time and only the second column. The several descriptions are written in an .txt file, like LVC;Low voltage cubicle and on the next row LVP;Low voltage panel, and so on.
I think it is only possible with Lisp? or there are other way?
In the past i did it one by one, because mostly there where 2 or 3 tables, now i have a big project with more than 20 tables.
lsp.I could not able to find error.
(defun c:t5()
(setq entname (entget(car(entsel))))
(setq thjh (cdr (assoc 72 entname)))
(setq tvjv (cdr (assoc 73 entname)))
[Code]....
I cannot purge a textstyle out of my drawing. When I run purge nothing is available.
However if I select the style from the style dialog I am able to select delete and delete the style.
When I use the method on the style (vlax-invoke-method style 'Delete). AutoCAD states:
Automation Error. Object is referenced by other object(s)
The style is defenatly not in use but may have been used in the past.
I am trying to put together a LISP that changes the font of two text styles. One bing named "Standard", and the other "WD".
This is what I have so far...
(defun C:CHANGESTYLE (/ entities len count ent ent_data ent_name new_style_name)
(command "STYLE" "Standard" "Romantic" "" "" "" "" "")
(setq entities (ssget "X" '((0 . "TEXT")))
len(sslength entities) count 0);
[Code]....
I couldn't figure out how to select mtext and text all in one swoop, so i ran it twice
Now, when i run this code, i get the following error "lselsetp nil".
CADMASTER TECHNOLOGIES, LLC
[URL]....
