AutoCAD Visual LISP / AutoLISP :: How To Make Sum Field In A Table
Jun 24, 2013i have one table make which field from block. Is possible sum?
View 4 Replies
ADVERTISEMENT
AutoCAD Visual LISP / AutoLISP :: Make Attribute / Field In Template
Jan 17, 2013Is it possible to make an attribute or a field in a template with page numbering for layouts? Is it possible to make an attribute or a field in a template with the name of the layout?
View 7 Replies View RelatedAutoCAD Visual LISP / AutoLISP :: Using Formula Within A Field
Apr 11, 2012I am currently using a field for my elevation tags. The field reads the y-value of a line and displays the results as the elevation. Our local jurisdiction requires that we list elevations from above grade (A.G.L.) as well as from bottom of base plate. The difference is usually 6"-12".
I was wondering if I could create another field that would read the same y-value of a line, but then subtract a predetermined value (6") and display the results.
Currently we have to do the math ourselves and this leaves room for errors and is often very tedious.
AutoCAD Visual LISP / AutoLISP :: How To Read Attribute Value Which Is A Field
Dec 15, 2011(cdr (assoc 1 (entget (entnext (car (entsel))))) ...
gives the string value of the attribute, but i would like to retrieve the field value attached to that attribute.
AutoCAD Visual LISP / AutoLISP :: Conditional Statement In Field?
Aug 19, 2013I created a block, that uses the Y coordinate of the block and returns it's location in a field.
I would like to be able to indicate weather the value is negative or positive. If Y coordinate is less then 0, then the field indicates "-" in front of the value. But if the Y coordinate is positive, I couldn't find a way to place "+"symbol in front.
Is there any way I could introduce a conditional statement saying: if Y>0 then add "+" in front?
AutoCAD Visual LISP / AutoLISP :: Convert Field To Text
Aug 1, 2006What is the Command that Converts a Field to Text so that I can stop a Field updating after the initial set-up? I need to apply this in lisp.
View 9 Replies View RelatedAutoCAD Visual LISP / AutoLISP :: Getting Field Formulas From Sheets Set?
Dec 6, 2013I had a routine that extracted field values from text and atts, but noticed this morning it did not work on fields from sheets sets.
I looked at the code and realized if a field formula is beyond 256 chars, the dxf codes store it in multiple groups.
Here is the revised code that deals with thos multiple groups (3 and then 2):
;GET LIST OF TEXT AND FIELDS FOR A GIVEN TEXT;RETURNS ("PLOTTED BY " "%<\AcVar Login \f "%tc4">%" " DATE" ...);FIELDS START AND END WITH WITH %< >%;(TXT-FIELDS-SEPARATED (car (Nentsel " Select Text, MText or Attribute: "))) (DEFUN TXT-FIELDS-SEPARATED (ENAME
/ DICT ELIST ENDINDEX FIELDS FLDDICT FLST FORMULA INDEX OBJ SPLIT-FLDS TRIMMED-LIST TXT-LIST TXTAFTER DENT FLDVAL FLST-TR) (SETQ ELIST (ENTGET ENAME)) (COND ((OR (= (CDR (ASSOC 0 ELIST)) "TEXT")
[code]...
AutoCAD Visual LISP / AutoLISP :: Field Link To Layout Tab
Dec 5, 2007Is there any way to grab the Object ID or name from a layout tab to use in a field? I wish to link the layout name to a callout block so that if the layout tab changes position and name (inserting a new tab), the call out block will update no matter what page it is on. Without using the Sheet Set manager.
View 9 Replies View RelatedAutoCAD Visual LISP / AutoLISP :: Parsing In Field Formulas
Nov 3, 2011We use Sheet Set Manager fields to keep track of section cuts and details and such.Users are asking me if they can get only the last 4 digits of the sheet number to show up on the section cuts.
Is there a way to parse or truncate a field in the formula area of the field dialog box?I'm familiar with LISP and DIESEL but the file dialog box / formula area does not seem to accept those functions. Will it take a .NET function? If so, what? Or, is there another option I'm overlooking?
AutoCAD Visual LISP / AutoLISP :: Find Object Associated To A Field
Nov 1, 2011We use multi-leader objects in our drawings. When the multi-leader and its value are to be replicated throughout the drawing, we create mleaders with fields that show the contents of the first mleader. That way we can update only the value in the first mleader and all of its children will update as well. It works nicely for us.
Here comes one snag. If one of us opens a drawing with which we are not intimately familiar, we don't know which mleader is the parent of which children. There might be fifty parents and four hundred children in a drawing so going through them by hand is a big productivity drain.
What I need to do is write a routine that will let the user select the mleader that includes the field and have the routine highlight and/or zoom to the parent object.
I thought I should be able to find that info in the dxf codes for the mleader, but I am either missing it or it's not there.
AutoCAD Visual LISP / AutoLISP :: Turn On / Off Annotative Field
May 17, 2013When a text is selected, in properties palette the Annotative field can be turned on/off - how can i do it programatically?
activex doesn't not have a propertiy for it. i presume it is in xrecords but could not find it.
AutoCAD Visual LISP / AutoLISP :: Put Field Formula In Attribute Value?
Sep 7, 2011I am trying to put a field formula in an attribute value. Basically I have a block that has a attribute called QTY and it is equal to 1. I can get the object property to equal 1 with this expression:
%<AcObjProp Object(%<\_ObjId #########>%).Textstring>%
The expression above will show a value equal to 1 (as I would expect)
Lets say I have two blocks now and I have the lisp routine combine the field values to get the expression below.
%<AcObjProp Object(%<\_ObjId #########>%).Textstring>%+%<AcObjProp Object(%<\_ObjId #########>%).Textstring>%
In the attribute dialog box it will show 1+1 instead of 2. My question is how do I get it to show 2 with out opening the formula box and evaluating it?
I have also tried.
%<AcExpr(%<AcObjProp Object(%<\_ObjId #########>%).Textstring>%)+(%<AcObjProp Object(%<\_ObjId #########>%).Textstring>%)>%
and
%<AcExpr((%<AcObjProp Object(%<\_ObjId #########>%).Textstring>%)+(%<AcObjProp Object(%<\_ObjId #########>%).Textstring>%))>%
AutoCAD Visual LISP / AutoLISP :: Edit Format Of Text Field
Aug 7, 2013I have many texts fields in my drawing. I need edit the format of all field. e.g field - 1030.60 convert to - 1.030,60 Is there any lisp doing that? I mean, select multiple field and change it.
View 3 Replies View RelatedAutoCAD Visual LISP / AutoLISP :: Next / Previous Sheet Number Field
Sep 21, 2006The Field dialog box has an item for CurrentSheetNumber with field expression: %<AcSm Sheet.Number>%
Is it possible to create a Field to display the Next Sheet Number (CurrentSheetNumber + 1) and a Field to display the Previous Sheet Number (CurrentSheetNumber - 1)?
AutoCAD Visual LISP / AutoLISP :: Field Update Customscale Viewport
Feb 22, 2013I'm trying to create a field in a block (titleblock) that will automaticly update when I change the viewportscale.It's mostly only 1 viewport, sometimes a second of even 3rd but, they are not important to the titleblock.
I've read aboud fields and diesel expressions. I've tried and it works. there is only 1 problem,It only works with the object (when field expresssion, object, custom scale) in this case the viewport pressent at that time.
When i use the same field with the same expressions, it does not recognize the viewport/object.Is there a way to make the field, diesel expression or even something else, work without it's need for a
object name. Perhabs that the expression gets the viewportname from a lisp, something like: (setq ss(ssget "X")) ;some thing like this Can it be done?
AutoCAD Visual LISP / AutoLISP :: How To Use A Field To Display Text Information
Sep 14, 2011I have a situation where I have a AutoCAD table linked to a Excel table to retrieve lots of general information for a standard drawing. That works just fine. In additionally I can use the fields "formula" field name and select a cell in the AutoCAD table to pull the data from the cell to the field, and this works for table cells that are numeric, but some of the cells are text based, and for these situations AutoCAD simply gives me the #### result. Is there a way to use a field to display text data from a AutoCAD table Cell?
View 3 Replies View RelatedAutoCAD Visual LISP / AutoLISP :: How To Tie A Key From Custom Dictionary To Display In Field
Sep 16, 2013How I can tie a key from a custom dictionary to display in a field?
I know that I can dump the custom dictionary into global and the fields can track those values, but instead of strangling my available memory I'd rather track the dictionary key directly. How can I utilize the Entity name or the actual dictionary name & key?
AutoCAD Visual LISP / AutoLISP :: Field Object Attribute In Xref?
Oct 19, 2011Is there way get field object att in xref ?
View 3 Replies View RelatedAutoCAD Visual LISP / AutoLISP :: Edit Diesel Expression In Field
Sep 2, 2011If LISP can be used to edit a diesel expression in a field inserted in dtext? I need to adjust the last number in $(+, $(GETVAR, USERI2),1) .
View 4 Replies View RelatedAutoCAD Visual LISP / AutoLISP :: Send Field Value To Multileader With A Block
Dec 10, 2013I'm trying to send field value to a multileader with a block. I tried:
(VL-CMDF "_.mleader" (getpoint "
Specify leader arrowhead location: ") pause "%<AcVar.17.0 Lisp.*granitelbl* f "%tc1">%")
Maybe it was a naive of me to charge in so boldly. The field appears to have made it in but it does not act like a field and does not reflect the correct value or update. In fact I get no response at all. In fact using "update field" "all" selects the fields but reports that they are locked.
AutoCAD Visual LISP / AutoLISP :: Extract Field Expression of Attribute In Block
Mar 8, 2012Is that possible to have a lisp to extract the Field Expression of a attribute in a block?Specifically, to extract the property VALUE (TextString) of this attribute.After to extract, I would like to put this text extracted in a different layout tab, in the same drawing. In this way, I will have a text linked to the attribute value between two layout tabs. So, when I have to change the attribute value, the text will be updated automatically.
I know that if I use the FIELD command to manually copy and paste this value it will work, but when I have a lot of attributes it becomes very laborious.
AutoCAD Visual LISP / AutoLISP :: Default Formatting For Field / Object-Polyline-Area
Aug 10, 2012I create a lot of fields that reference a polyline area and I'm constantly having to change the default formatting values. I would like it to default to an Architectural format, WITHOUT the appended "SQ. FT." (which often takes up too much space), with a precision of 0 and using a comma as the Thousands Separator.
Is there any way to set these default values?
AutoCAD Visual LISP / AutoLISP :: Sheet Setup - Rename / Renumber Additional Field
Dec 27, 2013How to add the sheet description field into the rename & renumber window? I ask this because during the sheet set-up process we use the sheet description often, and I would like to go from sheet to sheet without having to right click and edit every sheet.
Civil 3D x64 2012
Win 7 x64 Ultimate
I7 3820 (3.6ghz quad core with HT)
32gig RAM (Corsair XMS3 4x8g)
Intel x z79 mobo (BOXDX79TO 2011 socket)
Radeon HD 7850 2gb GDDR5
AutoCAD Visual LISP / AutoLISP :: Get Cell Value From A Table
May 31, 2013I have set up several tables inside autocad that have one cell as the input cell and after regen the others perform calculations based on that cell. I want to write a command that uses the same value as the input value to draw the arc to scale. I tried using the table value as is called out in the cell field:
^C^C_arc 36,6;e;0,6;r;Table(8796085192704).A3;.
Is there anyway to get a value from a cell inside autocad and put it into my macro so I can draw an arc of the radius shown?
AutoCAD Visual LISP / AutoLISP :: Go From TEXT And LINES To TABLE?
May 6, 2009The PARTS LISTS on our old drawings are simply text entities and lines. Some are MTEXT. But our new drawing template has us creating our parts list using the actual AutoCAD TABLES entity.
I'm looking for the best method to go from lines and text in AutoCAD, to an AutoCAD table. As of now, I have to retype everything since I can't select a column/row or group of text entities, copy/paste into a table.
Any LISP function that will allow me to go from TEXT and LINES to a TABLE? I've tried B2E (lisp name) but it's not working - found that on a lisp site somewhere.
AutoCAD Visual LISP / AutoLISP :: Excel Coordinates To Table
Mar 19, 2013I need to draw a table with point number, easting, northing, elevation for a lot of points and need a lisp to read the xl spreadsheet and draw the table.
View 9 Replies View RelatedAutoCAD Visual LISP / AutoLISP :: Unlocking Cell In A Table?
Aug 29, 2012Is there a way to unlock a cell using lisp. I have a datalink that is used to create a table. Once the table is selected I have a command that will format some of the cell style (which will let me while locked), but it I cannot seem to find a way to unlock them to merge a couple of cells. I can manually do it using the table toolbar, but programmably I am a little stuck. I can see if it is editable by using the vla-iscontenteditable and it will return :vlax-false. I do not see a vla-setcontenteditble or something to that effect.
View 3 Replies View RelatedAutoCAD Visual LISP / AutoLISP :: Rotating A Table To Current UCS?
Sep 12, 2012Tables do no have a rotation angle. I can find the insert point, but there is no other point to make an angle calculation with.
(setq objTable (vlax-ename->vla-object (car (entsel))))
(vlax-dump-object objTable T)
AutoCAD Visual LISP / AutoLISP :: Get Table Cell Content Name
May 14, 2012I have a table, in cell D3 I have inserted a field containing a system variable. The contents of the cell looks like this,
%<AcVar dimadec>%
I want to put in cell D2 the name of the vairable that is in cell D3 - I have tried the following,
%<AcExpr (D3).ObjectName>%
%<AcExpr (D3).textstring>%
Is there any way to reference the name of that system variable contained in cell D3? I want to do this to prevent errors by curious new users that may edit the table, I want the table to reference itself so that the system variable being read is always related to the correct system variable name.
AutoCAD Visual LISP / AutoLISP :: Table Search With Wildcards?
Dec 9, 2011any code that can search for a layer using wildcards?
In my specific case, I have multiple layers than begin with "MECA" followed by a job code. I'm trying to code something that will check to see which of those layers is on, then return the layer name.
AutoCAD Visual LISP / AutoLISP :: Compare 2 Cells In A Table
May 15, 2012Is there any way to compare 2 cells in a table? I have tried diesel
$(if,$(EQ,%<AcObjProp Object(%<\_ObjId 2128896328>%).b2>%,%<AcObjProp Object(%<\_ObjId 2128896328>%).d2>%),true,false)
I can't seem to pass the cells into the equation. I tried formulas also with no luck.