AutoCAD Visual LISP / AutoLISP :: Convert Field To Text
Aug 1, 2006What is the Command that Converts a Field to Text so that I can stop a Field updating after the initial set-up? I need to apply this in lisp.
View 9 Replies
ADVERTISEMENT
AutoCAD Visual LISP / AutoLISP :: Edit Format Of Text Field
Aug 7, 2013I have many texts fields in my drawing. I need edit the format of all field. e.g field - 1030.60 convert to - 1.030,60 Is there any lisp doing that? I mean, select multiple field and change it.
View 3 Replies View RelatedAutoCAD Visual LISP / AutoLISP :: How To Use A Field To Display Text Information
Sep 14, 2011I have a situation where I have a AutoCAD table linked to a Excel table to retrieve lots of general information for a standard drawing. That works just fine. In additionally I can use the fields "formula" field name and select a cell in the AutoCAD table to pull the data from the cell to the field, and this works for table cells that are numeric, but some of the cells are text based, and for these situations AutoCAD simply gives me the #### result. Is there a way to use a field to display text data from a AutoCAD table Cell?
View 3 Replies View RelatedAutoCAD Visual LISP / AutoLISP :: Convert Text To Attribute Inside Block
May 3, 2013Looking for routine for converting text to attributes inside the block?
In my drawing I hv some attribute blocks having some Text in it. I need to change the Texts inside the blocks as Attribute Texts. I am attaching sample Blocks drawing..
AutoCAD Visual LISP / AutoLISP :: Convert List With String Or Lists Of Strings To Text
May 22, 2013Someday the light bulb is going off and I will understand mapcar and lambda. However.....I have a program that reads an excel file sheets. Sometimes the sheet only has 1 column, sometimes 2 or more.
I need to convert the saved values from the sheet to a list with the text spaced evenly. Unfortunately the text lengths vary. I would like a subroutine to pass the list to and return a list of strings with text aligned with padded spaces allowing for the longest text in each column. I am using the new list in a dialog box with fixed_width_font=true (so columns align).
Example 1-
(setq List1 (list "Col1-Line1" "Col1-Line2" "Col1-Line3-longer" "Col1-Line4"))
(AlignText List1)
returns
"Col1-Line1"
"Col1-Line2"
"Col1-Line3-longer"
"Col1-Line4"
so no padding needed
Example 2 -
(setq List2 (list (list "Col1-Line1" "Col1-Line2" "Col1-Line3-longer" "Col1-Line4") (list "Col2-Line1-longer" "Col2-Line2" "Col1-Line3" "Col2-Line4")))
(AlignText List1)
returns
"Col1-Line1 Col2-Line1-longer"
"Col1-Line2 Col2-Line2 "
"Col1-Line3-longer Col2-Line3 "
"Col1-Line4 Col2-Line4 "
Example 3 -
(setq List3 (list (list "Col1-Line1" "Col1-Line2-longer" "Col1-Line3" "Col1-Line4") (list "Col2-Line1-longer" "Col2-Line2" "Col1-Line3" "Col2-Line4") (list "Col3-Line1-longer" "Col3-Line2" "Col1-Line3" "Col3-Line4")))
returns
"Col1-Line1 Col2-Line1-longer Col3-Line1-longer"
"Col1-Line2-longer Col2-Line2 Col3-Line2 "
"Col1-Line3-longer Col2-Line3 Col1-Line3 "
"Col1-Line4 Col2-Line4 Col3-Line4 "
AutoCAD Visual LISP / AutoLISP :: Convert Fields Into Text In Specific Attribute Tags
Jan 6, 2014Convert Fields to text in my Title Block. I want to change some specific attributes only to convert into texts in my title block ( "MODE_A3" is my Title Block name).
For example in "MODE_A3" block having lots of tags like TAG1, TAG2, TAG3 upto TAG10 with fields. I need to change TAG3, TAG4, & TAG5 attribute fields into texts in all layouts.
AutoCAD Visual LISP / AutoLISP :: Using Formula Within A Field
Apr 11, 2012I am currently using a field for my elevation tags. The field reads the y-value of a line and displays the results as the elevation. Our local jurisdiction requires that we list elevations from above grade (A.G.L.) as well as from bottom of base plate. The difference is usually 6"-12".
I was wondering if I could create another field that would read the same y-value of a line, but then subtract a predetermined value (6") and display the results.
Currently we have to do the math ourselves and this leaves room for errors and is often very tedious.
AutoCAD Visual LISP / AutoLISP :: How To Read Attribute Value Which Is A Field
Dec 15, 2011(cdr (assoc 1 (entget (entnext (car (entsel))))) ...
gives the string value of the attribute, but i would like to retrieve the field value attached to that attribute.
AutoCAD Visual LISP / AutoLISP :: Conditional Statement In Field?
Aug 19, 2013I created a block, that uses the Y coordinate of the block and returns it's location in a field.
I would like to be able to indicate weather the value is negative or positive. If Y coordinate is less then 0, then the field indicates "-" in front of the value. But if the Y coordinate is positive, I couldn't find a way to place "+"symbol in front.
Is there any way I could introduce a conditional statement saying: if Y>0 then add "+" in front?
AutoCAD Visual LISP / AutoLISP :: Getting Field Formulas From Sheets Set?
Dec 6, 2013I had a routine that extracted field values from text and atts, but noticed this morning it did not work on fields from sheets sets.
I looked at the code and realized if a field formula is beyond 256 chars, the dxf codes store it in multiple groups.
Here is the revised code that deals with thos multiple groups (3 and then 2):
;GET LIST OF TEXT AND FIELDS FOR A GIVEN TEXT;RETURNS ("PLOTTED BY " "%<\AcVar Login \f "%tc4">%" " DATE" ...);FIELDS START AND END WITH WITH %< >%;(TXT-FIELDS-SEPARATED (car (Nentsel " Select Text, MText or Attribute: "))) (DEFUN TXT-FIELDS-SEPARATED (ENAME
/ DICT ELIST ENDINDEX FIELDS FLDDICT FLST FORMULA INDEX OBJ SPLIT-FLDS TRIMMED-LIST TXT-LIST TXTAFTER DENT FLDVAL FLST-TR) (SETQ ELIST (ENTGET ENAME)) (COND ((OR (= (CDR (ASSOC 0 ELIST)) "TEXT")
[code]...
AutoCAD Visual LISP / AutoLISP :: Field Link To Layout Tab
Dec 5, 2007Is there any way to grab the Object ID or name from a layout tab to use in a field? I wish to link the layout name to a callout block so that if the layout tab changes position and name (inserting a new tab), the call out block will update no matter what page it is on. Without using the Sheet Set manager.
View 9 Replies View RelatedAutoCAD Visual LISP / AutoLISP :: Parsing In Field Formulas
Nov 3, 2011We use Sheet Set Manager fields to keep track of section cuts and details and such.Users are asking me if they can get only the last 4 digits of the sheet number to show up on the section cuts.
Is there a way to parse or truncate a field in the formula area of the field dialog box?I'm familiar with LISP and DIESEL but the file dialog box / formula area does not seem to accept those functions. Will it take a .NET function? If so, what? Or, is there another option I'm overlooking?
AutoCAD Visual LISP / AutoLISP :: Find Object Associated To A Field
Nov 1, 2011We use multi-leader objects in our drawings. When the multi-leader and its value are to be replicated throughout the drawing, we create mleaders with fields that show the contents of the first mleader. That way we can update only the value in the first mleader and all of its children will update as well. It works nicely for us.
Here comes one snag. If one of us opens a drawing with which we are not intimately familiar, we don't know which mleader is the parent of which children. There might be fifty parents and four hundred children in a drawing so going through them by hand is a big productivity drain.
What I need to do is write a routine that will let the user select the mleader that includes the field and have the routine highlight and/or zoom to the parent object.
I thought I should be able to find that info in the dxf codes for the mleader, but I am either missing it or it's not there.
AutoCAD Visual LISP / AutoLISP :: Turn On / Off Annotative Field
May 17, 2013When a text is selected, in properties palette the Annotative field can be turned on/off - how can i do it programatically?
activex doesn't not have a propertiy for it. i presume it is in xrecords but could not find it.
AutoCAD Visual LISP / AutoLISP :: How To Make Sum Field In A Table
Jun 24, 2013i have one table make which field from block. Is possible sum?
View 4 Replies View RelatedAutoCAD Visual LISP / AutoLISP :: Put Field Formula In Attribute Value?
Sep 7, 2011I am trying to put a field formula in an attribute value. Basically I have a block that has a attribute called QTY and it is equal to 1. I can get the object property to equal 1 with this expression:
%<AcObjProp Object(%<\_ObjId #########>%).Textstring>%
The expression above will show a value equal to 1 (as I would expect)
Lets say I have two blocks now and I have the lisp routine combine the field values to get the expression below.
%<AcObjProp Object(%<\_ObjId #########>%).Textstring>%+%<AcObjProp Object(%<\_ObjId #########>%).Textstring>%
In the attribute dialog box it will show 1+1 instead of 2. My question is how do I get it to show 2 with out opening the formula box and evaluating it?
I have also tried.
%<AcExpr(%<AcObjProp Object(%<\_ObjId #########>%).Textstring>%)+(%<AcObjProp Object(%<\_ObjId #########>%).Textstring>%)>%
and
%<AcExpr((%<AcObjProp Object(%<\_ObjId #########>%).Textstring>%)+(%<AcObjProp Object(%<\_ObjId #########>%).Textstring>%))>%
AutoCAD Visual LISP / AutoLISP :: Next / Previous Sheet Number Field
Sep 21, 2006The Field dialog box has an item for CurrentSheetNumber with field expression: %<AcSm Sheet.Number>%
Is it possible to create a Field to display the Next Sheet Number (CurrentSheetNumber + 1) and a Field to display the Previous Sheet Number (CurrentSheetNumber - 1)?
AutoCAD Visual LISP / AutoLISP :: Make Attribute / Field In Template
Jan 17, 2013Is it possible to make an attribute or a field in a template with page numbering for layouts? Is it possible to make an attribute or a field in a template with the name of the layout?
View 7 Replies View RelatedAutoCAD Visual LISP / AutoLISP :: Field Update Customscale Viewport
Feb 22, 2013I'm trying to create a field in a block (titleblock) that will automaticly update when I change the viewportscale.It's mostly only 1 viewport, sometimes a second of even 3rd but, they are not important to the titleblock.
I've read aboud fields and diesel expressions. I've tried and it works. there is only 1 problem,It only works with the object (when field expresssion, object, custom scale) in this case the viewport pressent at that time.
When i use the same field with the same expressions, it does not recognize the viewport/object.Is there a way to make the field, diesel expression or even something else, work without it's need for a
object name. Perhabs that the expression gets the viewportname from a lisp, something like: (setq ss(ssget "X")) ;some thing like this Can it be done?
AutoCAD Visual LISP / AutoLISP :: How To Tie A Key From Custom Dictionary To Display In Field
Sep 16, 2013How I can tie a key from a custom dictionary to display in a field?
I know that I can dump the custom dictionary into global and the fields can track those values, but instead of strangling my available memory I'd rather track the dictionary key directly. How can I utilize the Entity name or the actual dictionary name & key?
AutoCAD Visual LISP / AutoLISP :: Field Object Attribute In Xref?
Oct 19, 2011Is there way get field object att in xref ?
View 3 Replies View RelatedAutoCAD Visual LISP / AutoLISP :: Edit Diesel Expression In Field
Sep 2, 2011If LISP can be used to edit a diesel expression in a field inserted in dtext? I need to adjust the last number in $(+, $(GETVAR, USERI2),1) .
View 4 Replies View RelatedAutoCAD Visual LISP / AutoLISP :: Send Field Value To Multileader With A Block
Dec 10, 2013I'm trying to send field value to a multileader with a block. I tried:
(VL-CMDF "_.mleader" (getpoint "
Specify leader arrowhead location: ") pause "%<AcVar.17.0 Lisp.*granitelbl* f "%tc1">%")
Maybe it was a naive of me to charge in so boldly. The field appears to have made it in but it does not act like a field and does not reflect the correct value or update. In fact I get no response at all. In fact using "update field" "all" selects the fields but reports that they are locked.
AutoCAD Visual LISP / AutoLISP :: Extract Field Expression of Attribute In Block
Mar 8, 2012Is that possible to have a lisp to extract the Field Expression of a attribute in a block?Specifically, to extract the property VALUE (TextString) of this attribute.After to extract, I would like to put this text extracted in a different layout tab, in the same drawing. In this way, I will have a text linked to the attribute value between two layout tabs. So, when I have to change the attribute value, the text will be updated automatically.
I know that if I use the FIELD command to manually copy and paste this value it will work, but when I have a lot of attributes it becomes very laborious.
AutoCAD Visual LISP / AutoLISP :: Default Formatting For Field / Object-Polyline-Area
Aug 10, 2012I create a lot of fields that reference a polyline area and I'm constantly having to change the default formatting values. I would like it to default to an Architectural format, WITHOUT the appended "SQ. FT." (which often takes up too much space), with a precision of 0 and using a comma as the Thousands Separator.
Is there any way to set these default values?
AutoCAD Visual LISP / AutoLISP :: Sheet Setup - Rename / Renumber Additional Field
Dec 27, 2013How to add the sheet description field into the rename & renumber window? I ask this because during the sheet set-up process we use the sheet description often, and I would like to go from sheet to sheet without having to right click and edit every sheet.
Civil 3D x64 2012
Win 7 x64 Ultimate
I7 3820 (3.6ghz quad core with HT)
32gig RAM (Corsair XMS3 4x8g)
Intel x z79 mobo (BOXDX79TO 2011 socket)
Radeon HD 7850 2gb GDDR5
AutoCAD Visual LISP / AutoLISP :: Batch Convert DGN To DWG?
Nov 23, 2011My work needs to convert thousands of DGN files to DWG. We are using AutoCAD 2012. Is it possible to batch convert dgn files with a LISP and a mapping file?
View 9 Replies View RelatedAutoCAD Visual LISP / AutoLISP :: How To Convert To String ACL
Jun 6, 2012I have a list that is "acl", I would like to convert it to a string "acl", everything that I have read uses alot of code. Does this really take that much code to do?
View 9 Replies View RelatedAutoCAD Visual LISP / AutoLISP :: Convert Solid To Hatch?
Jan 6, 2005is there a way to convert multiple 2d solids to hatches.
View 9 Replies View RelatedAutoCAD Visual LISP / AutoLISP :: Code To Convert All Lines
Sep 18, 2013I need a lisp code to convert all Lines, Polylines, Arcs and Splines to Polylines with 0.4 width.
I prepare this:
(defun c:CH2pl ( / SS);changes all lines, plines, arcs and splines to POLYLINE with 0.4 width(if (setq SS (ssget "_X" '((0 . "LINE"))))(command "_.pedit" "m" SS "" "Y" "w" 0.4 ""))(if (setq SS (ssget "_X" '((0 . "*POLYLINE"))))(command "_.pedit" "m" SS "" "w" 0.4 ""))(if (setq SS (ssget "_X" '((0 . "ARC"))))(command "_.pedit" "m" SS "" "Y" "w" 0.4 ""))(if (setq SS (ssget "_X" '((0 . "SPLINE"))))(command "_.pedit" "m" SS "" "Y" 10 "w" 0.4 "")))
But I want pure lisp code in a professional way!
AutoCAD Visual LISP / AutoLISP :: Convert All Attributes To Layer 0
Sep 12, 2013I have searched the web and the Autodesk Discussion Group for a LISP Routine that allows me to convert all attributes in a drawing to Layer 0 but i have had no luck. It would be great if the LISP could edit xrefs as well although not sure if this is possible.
**BATTMAN command will take too long for the hundreds of blocks, xrefs and drawings i need to edit.