AutoCAD Visual LISP / AutoLISP :: Conditional Statement In Field?
Aug 19, 2013
I created a block, that uses the Y coordinate of the block and returns it's location in a field.
I would like to be able to indicate weather the value is negative or positive. If Y coordinate is less then 0, then the field indicates "-" in front of the value. But if the Y coordinate is positive, I couldn't find a way to place "+"symbol in front.
Is there any way I could introduce a conditional statement saying: if Y>0 then add "+" in front?
View 9 Replies
ADVERTISEMENT
Apr 11, 2012
I am currently using a field for my elevation tags. The field reads the y-value of a line and displays the results as the elevation. Our local jurisdiction requires that we list elevations from above grade (A.G.L.) as well as from bottom of base plate. The difference is usually 6"-12".
I was wondering if I could create another field that would read the same y-value of a line, but then subtract a predetermined value (6") and display the results.
Currently we have to do the math ourselves and this leaves room for errors and is often very tedious.
View 4 Replies
View Related
Dec 15, 2011
(cdr (assoc 1 (entget (entnext (car (entsel))))) ...
gives the string value of the attribute, but i would like to retrieve the field value attached to that attribute.
View 3 Replies
View Related
Aug 1, 2006
What is the Command that Converts a Field to Text so that I can stop a Field updating after the initial set-up? I need to apply this in lisp.
View 9 Replies
View Related
Dec 6, 2013
I had a routine that extracted field values from text and atts, but noticed this morning it did not work on fields from sheets sets.
I looked at the code and realized if a field formula is beyond 256 chars, the dxf codes store it in multiple groups.
Here is the revised code that deals with thos multiple groups (3 and then 2):
;GET LIST OF TEXT AND FIELDS FOR A GIVEN TEXT;RETURNS ("PLOTTED BY " "%<\AcVar Login \f "%tc4">%" " DATE" ...);FIELDS START AND END WITH WITH %< >%;(TXT-FIELDS-SEPARATED (car (Nentsel " Select Text, MText or Attribute: "))) (DEFUN TXT-FIELDS-SEPARATED (ENAME
/ DICT ELIST ENDINDEX FIELDS FLDDICT FLST FORMULA INDEX OBJ SPLIT-FLDS TRIMMED-LIST TXT-LIST TXTAFTER DENT FLDVAL FLST-TR) (SETQ ELIST (ENTGET ENAME)) (COND ((OR (= (CDR (ASSOC 0 ELIST)) "TEXT")
[code]...
View 3 Replies
View Related
Dec 5, 2007
Is there any way to grab the Object ID or name from a layout tab to use in a field? I wish to link the layout name to a callout block so that if the layout tab changes position and name (inserting a new tab), the call out block will update no matter what page it is on. Without using the Sheet Set manager.
View 9 Replies
View Related
Nov 3, 2011
We use Sheet Set Manager fields to keep track of section cuts and details and such.Users are asking me if they can get only the last 4 digits of the sheet number to show up on the section cuts.
Is there a way to parse or truncate a field in the formula area of the field dialog box?I'm familiar with LISP and DIESEL but the file dialog box / formula area does not seem to accept those functions. Will it take a .NET function? If so, what? Or, is there another option I'm overlooking?
View 2 Replies
View Related
Nov 1, 2011
We use multi-leader objects in our drawings. When the multi-leader and its value are to be replicated throughout the drawing, we create mleaders with fields that show the contents of the first mleader. That way we can update only the value in the first mleader and all of its children will update as well. It works nicely for us.
Here comes one snag. If one of us opens a drawing with which we are not intimately familiar, we don't know which mleader is the parent of which children. There might be fifty parents and four hundred children in a drawing so going through them by hand is a big productivity drain.
What I need to do is write a routine that will let the user select the mleader that includes the field and have the routine highlight and/or zoom to the parent object.
I thought I should be able to find that info in the dxf codes for the mleader, but I am either missing it or it's not there.
View 3 Replies
View Related
May 17, 2013
When a text is selected, in properties palette the Annotative field can be turned on/off - how can i do it programatically?
activex doesn't not have a propertiy for it. i presume it is in xrecords but could not find it.
View 9 Replies
View Related
Jun 24, 2013
i have one table make which field from block. Is possible sum?
View 4 Replies
View Related
Sep 7, 2011
I am trying to put a field formula in an attribute value. Basically I have a block that has a attribute called QTY and it is equal to 1. I can get the object property to equal 1 with this expression:
%<AcObjProp Object(%<\_ObjId #########>%).Textstring>%
The expression above will show a value equal to 1 (as I would expect)
Lets say I have two blocks now and I have the lisp routine combine the field values to get the expression below.
%<AcObjProp Object(%<\_ObjId #########>%).Textstring>%+%<AcObjProp Object(%<\_ObjId #########>%).Textstring>%
In the attribute dialog box it will show 1+1 instead of 2. My question is how do I get it to show 2 with out opening the formula box and evaluating it?
I have also tried.
%<AcExpr(%<AcObjProp Object(%<\_ObjId #########>%).Textstring>%)+(%<AcObjProp Object(%<\_ObjId #########>%).Textstring>%)>%
and
%<AcExpr((%<AcObjProp Object(%<\_ObjId #########>%).Textstring>%)+(%<AcObjProp Object(%<\_ObjId #########>%).Textstring>%))>%
View 5 Replies
View Related
Aug 7, 2013
I have many texts fields in my drawing. I need edit the format of all field. e.g field - 1030.60 convert to - 1.030,60 Is there any lisp doing that? I mean, select multiple field and change it.
View 3 Replies
View Related
Sep 21, 2006
The Field dialog box has an item for CurrentSheetNumber with field expression: %<AcSm Sheet.Number>%
Is it possible to create a Field to display the Next Sheet Number (CurrentSheetNumber + 1) and a Field to display the Previous Sheet Number (CurrentSheetNumber - 1)?
View 1 Replies
View Related
Jan 17, 2013
Is it possible to make an attribute or a field in a template with page numbering for layouts? Is it possible to make an attribute or a field in a template with the name of the layout?
View 7 Replies
View Related
Feb 22, 2013
I'm trying to create a field in a block (titleblock) that will automaticly update when I change the viewportscale.It's mostly only 1 viewport, sometimes a second of even 3rd but, they are not important to the titleblock.
I've read aboud fields and diesel expressions. I've tried and it works. there is only 1 problem,It only works with the object (when field expresssion, object, custom scale) in this case the viewport pressent at that time.
When i use the same field with the same expressions, it does not recognize the viewport/object.Is there a way to make the field, diesel expression or even something else, work without it's need for a
object name. Perhabs that the expression gets the viewportname from a lisp, something like: (setq ss(ssget "X")) ;some thing like this Can it be done?
View 8 Replies
View Related
Sep 14, 2011
I have a situation where I have a AutoCAD table linked to a Excel table to retrieve lots of general information for a standard drawing. That works just fine. In additionally I can use the fields "formula" field name and select a cell in the AutoCAD table to pull the data from the cell to the field, and this works for table cells that are numeric, but some of the cells are text based, and for these situations AutoCAD simply gives me the #### result. Is there a way to use a field to display text data from a AutoCAD table Cell?
View 3 Replies
View Related
Sep 16, 2013
How I can tie a key from a custom dictionary to display in a field?
I know that I can dump the custom dictionary into global and the fields can track those values, but instead of strangling my available memory I'd rather track the dictionary key directly. How can I utilize the Entity name or the actual dictionary name & key?
View 9 Replies
View Related
Oct 19, 2011
Is there way get field object att in xref ?
View 3 Replies
View Related
Sep 2, 2011
If LISP can be used to edit a diesel expression in a field inserted in dtext? I need to adjust the last number in $(+, $(GETVAR, USERI2),1) .
View 4 Replies
View Related
Dec 10, 2013
I'm trying to send field value to a multileader with a block. I tried:
(VL-CMDF "_.mleader" (getpoint "
Specify leader arrowhead location: ") pause "%<AcVar.17.0 Lisp.*granitelbl* f "%tc1">%")
Maybe it was a naive of me to charge in so boldly. The field appears to have made it in but it does not act like a field and does not reflect the correct value or update. In fact I get no response at all. In fact using "update field" "all" selects the fields but reports that they are locked.
View 4 Replies
View Related
Mar 8, 2012
Is that possible to have a lisp to extract the Field Expression of a attribute in a block?Specifically, to extract the property VALUE (TextString) of this attribute.After to extract, I would like to put this text extracted in a different layout tab, in the same drawing. In this way, I will have a text linked to the attribute value between two layout tabs. So, when I have to change the attribute value, the text will be updated automatically.
I know that if I use the FIELD command to manually copy and paste this value it will work, but when I have a lot of attributes it becomes very laborious.
View 9 Replies
View Related
Aug 10, 2012
I create a lot of fields that reference a polyline area and I'm constantly having to change the default formatting values. I would like it to default to an Architectural format, WITHOUT the appended "SQ. FT." (which often takes up too much space), with a precision of 0 and using a comma as the Thousands Separator.
Is there any way to set these default values?
View 2 Replies
View Related
Dec 27, 2013
How to add the sheet description field into the rename & renumber window? I ask this because during the sheet set-up process we use the sheet description often, and I would like to go from sheet to sheet without having to right click and edit every sheet.
Civil 3D x64 2012
Win 7 x64 Ultimate
I7 3820 (3.6ghz quad core with HT)
32gig RAM (Corsair XMS3 4x8g)
Intel x z79 mobo (BOXDX79TO 2011 socket)
Radeon HD 7850 2gb GDDR5
View 2 Replies
View Related
Jan 15, 2013
is there a way to make a if and conditional statement formula in a family with 3 tests?
For example,
Behind Furniture, Biscuit, Masonry Wall, Hard Ceiling are all yes/no parameters
if(and(Behind Furniture, Biscuit, Hard Ceiling), 0' 0 5/16", if(Behind Furniture, 0' 0 11/64", if(Biscuit, 0' 0 11/64", 0' 0 27/256", if(Masonry Wall, 0' 0 11/64", 0' 0 27/256"))))
what is wrond with my formula?
I am trying to change a dimension based on what yes/no parameters are checked. It keeps telling me that its "a bad if statement format". It works fine for the first teo dimension tests but when I add this last one I get the error. I need the 3rd dimension to check against 3 yes/no parameters all being = yes before moving on to the next check.
View 9 Replies
View Related
Jan 16, 2013
Is it possible to read the current wall thickness of a door's host and use that dimension in a conditional statement to locate the frame's setback?
If the wall is deeper than the frame I want the door flush with the wall, if the frame is deeper than the wall, I want the door centered.
I set up a Wall Width paramenter in my door family but I keep getting the "Inconsistent units" error message.
View 3 Replies
View Related
Jul 12, 2012
Is there a lisp that will allow me to do a continuous dimension, but will alternate the dimension position from low, high, low and high? If there is no lisp already created, how to create one?
See Continuous dimension attachment for example.
I work at a glass and glazing company and this is how we dimension mullion width and DLO. See typical window dimensioning attachment for window elevation with dimensions.
View 6 Replies
View Related
Nov 14, 2013
I have a list ("temp.dwg" "temp2.dwg") and would like to add the string "insert text here" into each item in the list resulting in ("insert text heretemp.dwg" "insert textheretemp2.dwg"). how would i go about doing that using LISP?
View 2 Replies
View Related
Oct 7, 2013
Is there a way to programatically set a visual style before a drawing actually opens?
We have some huge models and people seem to forget to change their visual styles back to 2D wireframe before saving and exiting drawings. Some models will crash on some workstations when trying to open in a rendered mode.
I found a lisp with a function that looked to set viewport visual styles. But it does not seem to be supported anymore. --> (vla-put-VisualStyle vport 1)
View 9 Replies
View Related
Oct 11, 2012
I'm trying to write a lisp routine that, when I invoke the mleader command, osmode is set to "nearest" & orthomode is set off. I then would like the original settings to be returned.
attached is what I have written so far:-
View 4 Replies
View Related
Jun 20, 2013
Lisp that switches back on Selection Preview i.e. thickens and highlights lines when you hover over them?I don't know why, but they are always unticking the boxes.
View 4 Replies
View Related
Sep 7, 2012
Is it possible to execute a certain command based on multiple selections withinin a dcl? for example: two radio colums, one with selections A and B, and a second with selections 1 and 2. is it possible to program commands based on user selections from each column? ex: if A and 1- do a command. A 2- do a different command, etc...
I tried :
(action_tile "key1" "(setq A t")
(action_tile "key2" "(setq B t")
(action_tile "key3" "(setq 1 t)(done_dialog)")
(action_tile "key4" "(setq 2 t)(done_dialog)")
(if
(and (a) (1)
)
(command ...
but was unsuccessful. no matter which combination was selected, the command under all combinations would run.
View 2 Replies
View Related
