I'm trying to write a lisp routine that, when I invoke the mleader command, osmode is set to "nearest" & orthomode is set off. I then would like the original settings to be returned.
attached is what I have written so far:-
I am trying to write a lisp routine that will make a layer called hatch, set it as current and then run the hatch command.
BUT the hatch command is not bring up the hatch dialogue box, it just puts things on the command line.
The layer is being made & set current.
The lisp is as follows:
(defun c:hh (/ ec)
(setq ec (getvar "cmdecho"))
(setvar "cmdecho" 0)
(command "-layer" "m" "hatch" "c" "8" "" "l" "continuous" "" "s" "hatch" "")
(command "hatch")
(setvar "cmdecho" ec)
)
On another matter, I have just found the bevel lisp routine by Terry Miller which works great BUT only for imperial measurements. How to make Terry's metric, that will work for metric measurements.
I am trying to create a lisp that prompts you to select multiple lines, and then prompts to enter a name of a block you wish to use. With that information use the measure command to place the entered block along the selected lines with the spacing set to the value in the blocks attribute.
I have a lisp that does most of this with the exception of the extracting the value of the block size to use as the distance between blocks, the current lisp just prompts for the distance.
I have a lot of blocks with different spacing so it is hard to remember the distance.
Here is the current Lisp i use:
(defun c:MEB (/ blk ss l name)
; TharwaT 04. 04. 2011
(if
[Code].....
I'm trying to execute a pedit command in a lisp routine, without echoing, with no luck...
cmdecho and nomutt dont resolve my problem...
Is it possible to write an event handler for an autocad event/ command like insert new block? I want the event to trigger the execution of an update routine . something like this post
[URL]
how do I access the autocad object in autolisp?
I am looking for some mleader customization.Basically looking for a mleader that will add an objects name(in my case an xref or block) in the text. Attached is a picture of our current process... nothing special. basically instead of typing in text we use the insert field. In the field dialog that opens we select "object" under Field names, then under object the type button is pressed to select object(in my case and xref or block) then under property the "Name" option is chosen. This will insert the xref name in the multileader. This is not terribly hard but am curious if I can automate and save some steps.
View 1 Replies View RelatedWe have a block contain 10 attibs to be seen with 8 differents scales making 80 attribs! (We use that before Annotative features). When we edit this block, we have a LISP that ask for the 10 avlues, and copy it for all the scale.
This lisp use the block ename in argument.
We start to use that block with MLEADER, but we can not edited with our lisp (can not find the ename of the block in the MLEADER definition ).
Is that a way to find this ename, and to be able to modify (our substitute) all the attributes value.
I'm working out a LISP for searching my entire drawing for a MLeader with a given value and then do something if it is found.
Currently, my code dies with
; error: Automation Error. Description was not provided.
I do not know what is going wrong & I don't know what must be done next.
(DEFUN ML-SRCHSTR (TXT LBL / SS n_txt_LBL ENT P1 P2) ;|(ML-SRCHSTR TXT)|; (IF (SSGET "x" '((0 . "MULTILEADER"))) (PROGN (SETQ ss (VLA-GET-ACTIVESELECTIONSET (VLA-GET-ACTIVEDOCUMENT (VLAX-GET-ACAD-OBJECT)))) (VLAX-FORent ss(IF (VL-STRING-SEARCH txt (STRCASE (VLA-GET-TEXTSTRING ent))) (PROGN (VLA-CLEAR ss) (INITGET 1 "Yes No") (SETQ n_txt_LBL (STRCAT "
=>> " LBL " Label EXISTS! Add another " txt "? ") y_n (GETKWORD (strcat n_txt_LBL " [Yes/No]: ")) ) (IF(= y_n "Yes") (PROGN (ppa-L-
[Code]...
My MLeader has a _TagBox & it is the attribute of the _TagBox that I am trying to check/compare the "txt" value.
I'm looking to draw a mleader (with a leader style CLL_Anno) using the block basepoint as insertion point, read two attributes from that block and use those as the text for the mleader. for example: "attribute - attribute". Attached is dwg with blocks with attributes and leader style. (Block is "Trees", Attributes are "V_SPECIES" "V_DBH_DIM")
View 2 Replies View RelatedI have some working code that sets the Text Style name to ROMANS inside my Mleader Style called ARROW. Here it is:
(setq dict (dictsearch (namedobjdict) "ACAD_MLEADERSTYLE") ; start setq q
dict1 (member (cons 3 "Arrow") dict) ; code 3 is Mleader Style Description
el1 (entget (cdr (assoc 350 dict1))) ; code 350 is dictionary entity handle
er (tblobjname "style" "Romans") ; new value for MLEADER Text Style
) ; end set
(entmod (subst (cons 342 er) (assoc 342 el1) el1)) ; code 342 is MmTextStyleId - write new vale to mTextStyleId
I want to modify this code so that it sets the Arrow Head Size to a specific value, say 0.125. Having a tough time figuring out the DXF codes and tblobjname to do this.
Basically, the routine asks for the user to choose the hatch type (Retirer/Percer), then the layer (Defpoints/Select/Current) and finaly the type of the object to draw (Polyline/Rectangle). My original routine has also a Circle and a Boundary options, and an Error trap to reset the variables but I will keep it simple for the purpose of my issue.
So, my issue is: when I choose the type of object to draw, it draws just one of it and the routine ends. I would like to have something that "says" to the routine that I want to keep drawing that object (Polyline or Rectangle) and putting the hacth inside until I do enter and then the routine goes to its end.
I have created an acad.lsp file in where I want to arrange all our company settings. I've stored it on the network to make sure everyone will use the same one and when updates take place I don't have to run past all pc's to change it. I've set everything in the deployment package but users can still change it when they reset their profile. Plus some pc's are already installed with AutoCAD before creating the lisp routine, how can I enforce the support directory to check on the network for the acad.lsp each time?
View 9 Replies View Relatedwith the mouse I can select objects on the screen and then start a command that uses these objects.
How can I perform this in lisp?
I can create my selection set, that's no problem, but how can I 'make it active' for an external function?
(ssget "_C" p0 p1 '((0 . "TEXT")))
???
(c:txtexp)
I put mleader into a LISP routine and it is doing the text attached to it only in the command line instead of in the drawing is ther a way to put mleader into a LISP routine and have it do the same as when you just type in mleader?
View 2 Replies View RelatedI want autolisp program to check overlap like in closed or open polyline with any other entity in the drawing, whether other entity is overlapping inside the polyline or not, i am beginner in autolisp and want to know exactly which functions are used or the program itself Also if possible to check circular overlap of one polyline with itself.
View 1 Replies View RelatedLISP routine for rotating lines so that text in linetypes always reads from left to right?
I use the QUERY command to create basemaps and often the lines that are imported read upside down or backwards or however you prefer to look at it. Most often, if I look at the XY coords of these backwards lines, the End X coordinate is of a higher value than the Start X coordinate.
Looking for something that would compare the two X coordinates of a line, do some sort of an IF Start X > End X, and if its true, store the XYZ coords of the Start and End in some variable, and swap them.
I am looking for a routine that will replace all blocks named "DgnMisc_nodepoleind" with a block named "DgnMisc_nodepoleind2" keeping the insertion point. I could use (command "-insert" "DgnMisc_nodepoleind=Y:/ACAD2007/DA settings/Library_new_scale1/DgnMisc_nodepoleind2.dwg" NIL ) but my problem is that the block I want to replace is used on two different layers and I only want to replace the ones on layer "TPSYM01".
View 3 Replies View RelatedI found a lisp routine on the internet to change page setups on multiple layouts. The lisp worked but on some of the layouts it moved the viewport off the paper background (see attached). The layouts print fine but the only way to get the viewport back on to the background is to open the page setup and click modify, then ok and close. I tested this on a .dwg that I had saved to my computer rather than on one in the main folder but I would like to do this to to all are maps since our IT decided to rename our printer and now all pages setups are no good.All I know about lisp is how to run one.
;; Copy current layout page setup to all layout tabs
(vl-load-com)
(defun c:CPS (/ Adoc Layts clyt)
(setq aDoc (vla-get-activedocument (vlax-get-acad-object))
Layts (vla-get-layouts aDoc)
clyt (vla-get-activelayout aDoc)
)
(foreach
itm
(vl-remove (vla-get-name clyt) (layoutlist))
(vla-copyfrom (vla-item Layts itm) clyt)
)
(princ)
)
I have a lisp routine:
(defun getLayout (pos / result cLayout layouts^ i len)
; pos = -1 return previuous layout name
; pos = 0 return current layout name
; pos = 1 return next layout name
(cond
((zerop pos)
(setq result (getvar "ctab"))
); case
[code]...
which basically returns either the current, previous or next tab name depending on what you call up. Any way to link this lisp to a field? I am doing some plan and profile drawings which contain match lines I would like to have the match line text automated. For example if I'm on layout called PP02 there would be two match lines in the drawing one would read MATCH LINE PP01 and the other would read MATCH LINE PP03 this lisp routine returns the correct variable but how do I loink this to a fiels?
I cannot get my lisp routine to run when I batch plot in AutoCAD 2014. It's loaded into the startup suite and runs when I open the individual drawings but not during a batch plot. How can I get this to run during a batch plot?
View 9 Replies View RelatedI don't do a lot of programming and when I do it is mostly with older lisp commands. I have routine that works in 2010 but we are switching to 2013 and it doesn't work. The routine assigns the area of a polyline to a field. The portion of the routine that isn't working is where it assigns the object id for the polyline. Here is that portion of the routine:
;; select an object
(if (setq ent (entsel))
(progn
(setq ent (car ent))
;; Check to see if object selected is a polyline
(if (= (cdr (assoc 0 (entget ent))) "LWPOLYLINE")
(progn
;; obtain the object id from the selected entity
(setq objID (vla-get-objectid (vlax-ename->vla-object ent)))
I have created a lisp routine that I would like to share with other CAD users, but it doesn't work on the server, and it works fine on my machine. Does "findfile" function work on a server environment?
View 4 Replies View RelatedI am looking for a LISP to automatically rename all my layouts. I would like the first layout to say "HWY 400 (01)", second layout "HWY 400 (02)", third layout "HWY 400 (03)" ect..
View 4 Replies View RelatedI need a routine that one can select a fence or a path along a whole lot of contours which are not in 3DPoly but rather a heavyweight POLYLINE and then have the Z value (elevation of this polyline) printed over the contour preferably along the direction of the vertex picked.
I have something right now that works by selecting individual plines but I need one you can select a whole lot and have the text inserted at the correct position.
See my simple code below:
;THIS IS FOR LABELLING 3D CONTOURS
(defun C:3DC ()
(graphscr)
(setq p (entsel "
Select CONTOUR to label: "))
(setq e (entget (car p)))
(setq e1 (entget (entnext (cdr (assoc -1 e)))))
[code]....
I recently upgrading to ACA 2014. I have set my trusted locations, my file path, the startup suite, and the system variable to load acad.lisp on startup. Most of my lisp routines load, but not all. I still have my ACA 2011 loaded, all settings are applied as required, yet I do not have the same issue with the same lisp routines. I have to reload my lisp routines for every drawing.
View 7 Replies View RelatedI'm trying to create a lisp routine where It will create a layer for the delta that is needed and at the same time adds the delta. I get delta revisions often and it takes time to add a new layer and a new delta for each plan. I would like to create a routine that creates the the new layer based on the revision number.
For example if I get a revision 2 I would like to have a lisp routine that creates a new layer but asks what number i would like to use, once the new layer gets created the revcloud command would run, I use polylines around my revisions then change them to cloud with the revcloud command. after i pick my polylines to be changed to clouds then it would add a delta block that is in an attribute and it lets me put the number of the revision i want. At the end I would have a new layer, a cloud around my revision and a delta corresponding to the revision number i'm currently working with.
I have a routine that creates the new layer, sets it current, and starts the revcloud command where i can pick the objects to change to clouds, after that I'm stuck, I'm not sure how to tell AutoCAD that after the selection is made to start the insert command to insert that delta attribute block. I mean the routine ends after i pick my objects, I tried doint the delta first but i ran into the same issue since my routine ends after AutoCAD ask me to pick a location to put my delta block.
I need to figure a way to tell AutoCAD that after something is picked or selected then to continue with the lisp routine without ending it. I atteched an example of what I have.
I was wondering if there is a setting somewhere that could hold my snapmode settings after I use a lisp routine. I found a lisp routine to rotate text and have noticed that everytime I use that lisp command I lose my osnap settings....
View 2 Replies View RelatedI wrote this small program to automate plotting a drawing to pdf. Everything work fine except I cannot figure out how to allow it to let me pick where I want the file created and what I want to call it. In this routine, the "" at the 3rd from the end place will just automatically name the file and put it in the parent folder. If I replace the "" with pause, it lets me change the name, but will not let me choose the location.
What I'm looking for is for a dialogue box to pop up (explorer style) that will let me choose a location and name the file. This is what happens if you do it "long hand" inside ACAD, how to do it in the code.
(defun C:clpdf ()
(setvar "cmdecho" 0)
(setvar "osmode" 0)
[Code]....
Me and a friend are trying to work on a LISP routine to select objects in a drawing and change their attributes to "ByLayer" and other things. He is a familiar with the AutoCAD commands, I have a general idea of how to use LISP and we're trying to put our heads together to solve some workflow issues at our job.
-aDiagram
(defun c:set23 ()(setq uecho (getvar "cmdecho"))(setvar "cmdecho" 0)(command "setbylayer" "al" "" "n" "y")(command "-layer" "c" "23" "*")(command "-xref" "d" "*")(command "-purge" "al" "" "*" "n")(setvar "cmdecho" uecho)(princ))
One of our users has recently upgraded from AutoCAD 2005 to AutoCAD 2014. He has a LISP routine that will no longer work and I'm not sure why.
View 9 Replies View RelatedLisp Routine that could replace a line at a specified maximum length with a block at the lines midpoint.
I would love to be able to replace all lines I select which are say less than 0.5m in length with a block at the lines.