I'm looking to draw a mleader (with a leader style CLL_Anno) using the block basepoint as insertion point, read two attributes from that block and use those as the text for the mleader. for example: "attribute - attribute". Attached is dwg with blocks with attributes and leader style. (Block is "Trees", Attributes are "V_SPECIES" "V_DBH_DIM")
View 2 RepliesI'm working out a LISP for searching my entire drawing for a MLeader with a given value and then do something if it is found.
Currently, my code dies with
; error: Automation Error. Description was not provided.
I do not know what is going wrong & I don't know what must be done next.
(DEFUN ML-SRCHSTR (TXT LBL / SS n_txt_LBL ENT P1 P2) ;|(ML-SRCHSTR TXT)|; (IF (SSGET "x" '((0 . "MULTILEADER"))) (PROGN (SETQ ss (VLA-GET-ACTIVESELECTIONSET (VLA-GET-ACTIVEDOCUMENT (VLAX-GET-ACAD-OBJECT)))) (VLAX-FORent ss(IF (VL-STRING-SEARCH txt (STRCASE (VLA-GET-TEXTSTRING ent))) (PROGN (VLA-CLEAR ss) (INITGET 1 "Yes No") (SETQ n_txt_LBL (STRCAT "
=>> " LBL " Label EXISTS! Add another " txt "? ") y_n (GETKWORD (strcat n_txt_LBL " [Yes/No]: ")) ) (IF(= y_n "Yes") (PROGN (ppa-L-
[Code]...
My MLeader has a _TagBox & it is the attribute of the _TagBox that I am trying to check/compare the "txt" value.
i'm relatively new to lisp routines. I've been trying to create a routine that will create a custom block with attribute with an option to select which drawing border size is being used. This is what i've got so far;
(defun c:NEW_REV_NOTE ()
(PRINC "
Drawing Size:")
(SETQ Paper_Size (GETSTRING "
[A1/A3] <A1>: "))
(IF (= Paper_Size "A1")
[code]....
I'm going wrong at the moment I get an error message when I try to load the file "; error: syntax error".
We have a block contain 10 attibs to be seen with 8 differents scales making 80 attribs! (We use that before Annotative features). When we edit this block, we have a LISP that ask for the 10 avlues, and copy it for all the scale.
This lisp use the block ename in argument.
We start to use that block with MLEADER, but we can not edited with our lisp (can not find the ename of the block in the MLEADER definition ).
Is that a way to find this ename, and to be able to modify (our substitute) all the attributes value.
select all blocks on certain layers in a drawing, check attribute CIRCUIT in each block if it starts with MS then attribute CONTROL = switched. I hope thats clear enough the way
(defun c:control()
(graphscr)
(Setq sc (ssget "X" '((0 . "INSERT")
[Code].....
(cdr (assoc 1 (entget (entnext (car (entsel))))) ...
gives the string value of the attribute, but i would like to retrieve the field value attached to that attribute.
I wanna transfer my attribute block values to another attribute text blocks , is there any lisp for that?
Is there a possibility for sum tag values of choice attribute blocks to inside of another attribute text block ?
Can a AutoLISP command be written to read an attribute in a block and draw a circle with the attribute as the diameter using variables? The appilcation is taking the diameter of a tree trunk (the attribute), multipling by 12, and drawing the canopy circle on hundreds of those blocks. So the circles drawn will vary in size.
Not sure how this could be set up, i'm not familiar with LISP writing at all.
1) Read block, single, mulitple or definition?
2) Read Attribute
3) Varaible of attribute, (attribute is an inch measurement...it needs to be multipled by 12 to get feet for final use as circle diameter drawn)
4) Draw circle, variable, with diameter coming from attribute variable (attribute in inches that is multipled by 12)
5) Center point or circle to be block's base point
I need to match few attribute values from one block to different block. I download a lisp file called; ca.lsp which can match the single attribute value. I modified it for more than one attribute value matching. It is ok but still wish to overcome two issues for batch prcess
1. picking up the blocks by selection
2. click the alternative block numbers of times to match the numbers of attribute values I needed.
How to modify this lisp I can run it by block name selections instead of picking selection which enable me to run batch process for numbers of drawing? That will be good...
Lisp & Demo file attached (Match attribute value, A, B & C to Attribute 1, 2 & 3).
I continue with my problems.....
I get attribute value from block and put it in a list:
(repeat (setq cnt (sslength sset))
(setq attValue (GetAttributeValue (ssname sset i) "tag1"))
(setq attValue2 (GetAttributeValue (ssname sset i) "tag2"))
[Code]...
When I try to put them in a table...
(foreach item lst
(vla-setText mytable
row 0
(last item)
)
(setq row (1+ row))
)
only put one ( attValue2) at column, and i like put 2 values, each one in a column in the same row
I need fix a block attribute named "NrPunct.dwg"
MyProblem: after I insert the block “NrPunct” in my drawing ,, I cannot modify "textHeight", when I edit the ATTDEF (or attribute) with the command “DDEDIT” . Why?
You see my arrow in the picture pozamea.jpg…
I am trying to update my Title Block with a LISP routine (As the title implies).
So far, this is what i have...
(defun c:aTest (/ ss att)
(if (setq ss (ssget "X" (list (cons 0 "INSERT")(cons 2 "TB_PARAMOUNT_ELC")
(cons 66 1)(if (getvar "CTAB")(cons 410 (getvar "CTAB"))
(cons 67 (- 1 (getvar "TILEMODE")))))))
(progn
(foreach ent (mapcar 'cadr (ssnamex ss))
(setq att (entnext ent))
[Code]...
The title block, block name is static. The attribute name is static.
My ultimate goal is to copy the value of one attribute and "paste" that into the value of another attribute, and itterate this through the entire project.
I'm looking for a lisp routine that will globally list all the values from a specific attribute tag within a specific block. The attribute tag is "COMMENT" and the block name is "FSD".
View 9 Replies View RelatedI can't find my notes on how I fixed it. When we insert our title block, it automatically inserts the drawing number. For one user, it doesn't work. The title block inserts, but it won't put in the drawing number. I seem to remember I need to change a setting or something to get it to work, but I can't remember what it is.
View 3 Replies View RelatedI started a lisp that moves blocks according to their attributes and align numeric value in x 0.0. I work currently selected point by point. I will wish it to run at once on a selection set (I am angry with entsel).
(defun c:test (/ sel ent st newpt)
(if (setq eset(ssget))
(progn
[Code]....
Here's my situation:
I have a block named "WIDGET-A". And in that block are (4) attribute tags whose names are:
"ID"
"TAG01"
"TAG02"
"TAG03"
The user will be prompted to pick the value displayed at any of the "TAG##" attributes - they will select the attribute tag they want (we don't know which one it is, we just want to assign that value of the attribute tag they clicked on to a variable called "VAR2".
Now, what we also want AutoCAD to evaluate, behind the scenes, is the value of the attribute tag named "ID" which we know always exists in the block and then assign that value to a variable called "VAR1".
Is there a way for AutoCAD to do this all from only a single user pick on top of an attribute value, in a block whose name isn't always going to be 'WIDGET-A' either.... But the block, whatever it's name, will always have the attribute tag "ID" with a value in it, and we always want to capture the value of whatever attribute tag within the block that the user clicked on.
I have a lot of attribute blocks in my drawing which i want to move them one by one
so , here is what i want to do :
I have numbers (or texts) in my work area and this numbers also exist in my attribute blocks .. i wanna move my attribute blocks with tag name value reference to my specify area if tag name values are matching with text or numbers in this area .. every block will check my selected tag string and will be move on matching text in my work area.
I would like to create a lisp that does the following:
Update a titleblock attribute with a $variable.
The titleblockname is variable / not static.
The attribute is not variable / Static, DW_SCALE
The titleblock is always places on the same layer, BL$4----
The (custom)-plotscale is stored in the $var "gvpsc".
I've tried to ajust the following lisp code. But I couldn't extract the part I need.
The problem is, the code checks all the layouts and updates all the titlblocks one by one.
Truely a good code.
The only problem is, I don't have multiple layouts and I have a variable titleblock name.
Here is to code i've tried to convert to something I could use.
(defun C:UPD-DPC () (setvar "cmdecho" 0) (setq blkname "DPC-STEMPEL");(getstring "
Enter the name of block to update: ")) (setq att1 "DW_DATE");(strcase(getstring "
Enter the name of the attribute to change: "))) (setq newatt (strcase(getstring "
[Code] ....
Is there a way (or a “trick”) to have one attribute at two different locations inside of one block (I want to avoid filling in the same text twice when this block is inserted or edited)?
View 9 Replies View RelatedI need a lisp sub-function that can empty all attributes of a specified dynamic block. The idea being that the specified block contains data that changes often and in order to repopulate the block's attributes with new data to replace the old I wish to just blank out the old data first, because it's possible that the new data may not utilize as many attributes and all of the old data must be removed.
The thing is the block I'm after is on several layouts, CTABs and they all need to be wiped clean.
I have a series of blocks that I need to insert into a drawing, maybe 100-200 times and then change one of the 6 attributes by an increment of 1.
I've looked at some of the older posts and have not been able to do this. Is it possible to take the tag regerence, in this case OUTLET_REF and automatically add 1 to it when the symbol is inserted.
Can this be done using Diesel or with a bit of lisp?
i have a for example a block with one attribute and would like add a new attribute. i´m trying to read the current block and redefine - it comes a new attribute in propertieswindow but not graphical.
(defun c:ent () (setq bn (getstring "
give a block name ")) (setq bez (getstring "
give a attribut name ")) (entmake (list (cons 0 "BLOCK")(list 10 0 0 0)(cons 2 bn)(cons 70 2))) (setq fe (entmakex (list (cons 0 "CIRCLE") (cons 8 "0") (cons 10 '(0 0 0)) (cons 40 1)))) (entmake (list (cons 0 "ATTDEF") (cons 8 "0") (cons 10 '(0 0 0)) (cons 11 '(0 0 0)) (cons 40 1) (cons 1 bez) (cons 3 "TOP") (cons 2 "NAME") (cons 70 0) (cons 73 0) (cons 50 0) (cons 41 1) (cons 51 0) (cons 7 "STANDARD") (cons 71 0) (cons 72 0) (cons 210 (list 0 0 1)) (cons 74 0) (cons 62 256) (cons 39 0) (cons 6 "BYLAYER"))) (entmake (list (cons 0 "ENDBLK")(cons 8 "0"))) (entdel fe) (entmake (list (cons 0 "INSERT")(cons 2 bn)(cons 10 '(0 0 0))(cons 66 1) (cons 62 256) (cons 39 0) (cons 6 "BYLAYER"))) (entmake (list (cons 0
[code]....
I'm trying to find a routine that will look for ABC block and updates its NUM attributes depending on what's shown in the DESC attribute. There are about 5 of these ABC blocks in a drawing. Block ABC has 2 sets of attributes: DESC and NUM.
When run, it will look at the value of tag DESC, if it contains value XXX, then it will change the NUM value to 1111. And if DESC contains value YYY, then it will change the NUM value to 2222.
I'm looking for a lisp routine that i can globally change the text height and width factor of a particular block attribute. The name of the attribute tag is "TAG". I would like to be able to select all the blocks that i need to edit and then specify what text height and width factor i want to change to.
View 9 Replies View RelatedI would like to :
-select an attribute block in my layout viewports
- select a directory where the PDF will be saved
- select the printer
and zoo.
All my layouts will be printed. The files will be created. The filename will be the attribute name (different in each layout viexports).
[ACAD2011 CIVIL3d]
I wanna change my block name to attribute text value, any similar lisp code?
View 9 Replies View RelatedI'm trying to write a lisp routine to create a two line MLEADER but i can only get one line of text. Creating the MLEADER manually from the command line i just have to hit enter after the first line of text to add a second line. How would i do this in a lisp routine?
View 2 Replies View RelatedI have a simple hexagon block with one attribute, i need to be able to copy it and as i do it increases the number by one.
the Block name is note1-2006 the attribute name is NOTENUM. I have tried using some other Lisps but i cant ge them to work. Sometimes i have to put 40 of these on a sketch i hate copying and changing the attribute by one everytime. so it would be nice to copy and as i pick mutliple spots it increase number. Dont know if there is a way to ask user to keep same number or increase. This would save me so much time.
I am trying to create a lisp that prompts you to select multiple lines, and then prompts to enter a name of a block you wish to use. With that information use the measure command to place the entered block along the selected lines with the spacing set to the value in the blocks attribute.
I have a lisp that does most of this with the exception of the extracting the value of the block size to use as the distance between blocks, the current lisp just prompts for the distance.
I have a lot of blocks with different spacing so it is hard to remember the distance.
Here is the current Lisp i use:
(defun c:MEB (/ blk ss l name)
; TharwaT 04. 04. 2011
(if
[Code].....
I'm using Autocrat 2004.
I have a attributed titleblock. Sometime in the future I will need to change the date attribute to another value, i.e.. 7-11 to 9-11.
I can't place a text string in the title block because this title block is used for multiple drawings and the date will be different for different sets. I can't have numerous title blocks because of the client's requirements.
Question:
Is there a way to write a script to open a drawing, look for the specific attribute, change the date value, save and close the drawing - across multiple sheets? Would a lisp routine called by the script be able to do this? Or a script file called by the original script file? CAn you even use a script file in this manner?
I have a block with:
tag1: XX
tag2: YYYYYY
tag3: ZZZZZZZZ
I have an external file check.txt with string:
XXYYYYYYZZZZZZZZ
I would like to create a lisp program that check the attributes of block using an external database, if tag1+tag2+tag3 = XXYYYYYYZZZZZZZZ ok end program, if not make a circle on block :