AutoCAD Visual LISP / AutoLISP :: Changing Text Style Used By Table Style
Jun 29, 2012
I am looking for a way to change the text style used by a table style with Visual LISP. So far I have been able to get the IAcadTableStyle object from the acad_tablestyle dictionary, but there is no property for text style. Is this even possible? Code and results are below.
I have inside every text,Mtext contents different text style like Arial_1 , Arial_2.
How i can give all the contents inside one style ? the normal procedure i will enter inside text to enter editing mode and changing text format style one by one. I want it once.
I want to save my routing of entering every text to change its content text style.
(Notice:select all from outside without editing mode will not do the job)
Is it possible to create a lisp that would change the plot style table? I don't know of any variable to type to change that. We convert drawings from Solid works to AutoCad and use the basic monochrome plot style. I'd like to easily change that since the act of doing that is repeated many times.
I wrote (setq oldtext (getvar "textstyle")) to save the current text style,
(setvar "textstyle" (getvar "dimtxsty")) to change the text style to the current dimension text style (which appens to be romans) and later (setvar "textstyle" oldtext) to restore the text style to its original setting but it won't work.
This is the same format used to save and restore osnap in many lisp routines.
When I check the program in the visual lisp editor, oldtext returns "standard" (the original text style - so that part works) but "textstyle" returns nil. I even tried (setvar "textstyle" "standard") to no avail. "Textstyle" remains romans.
I have a lisp function that is updating attribute values on a newly inserted block. The lisp function uses entget to read the attribute. Then it plugs a new value into the assoc 1 using subst, then uses entmod to update the attribute's value. It all works fine except that the attribute loses its style, i.e. assoc 7, somehow. If I do an entget on the attribute right after the entmod the assoc 7 is nil. The symptom on the drawing is that the attribute value is not visible until I close and open the drawing.
This only happens on a newly inserted block on existing drawings. If I close the drawing and reopen it then the lisp function works fine. Or If I insert the same block on a new drawing it all works fine. what would cause the assoc 7 to go missing after an entmod to change the attribute value?
The following snippit of code is changeing the color of text in a cell of an AcadTable. It will set the color to an RGB value and works great. But what if the color is a normal color 1 through 255 from autocad's pen table. How would I set the cell text color?
(setq objColor (vla-getcellcontentcolor eVLAMT R C)) ;sets a Color Object, whatever that is (vla-setrgb objColor RED GRN BLU) ;sets the new color of the Color Object (vla-setcellcontentcolor eVLAMT R C objColor) ;sets that new color object to the cell
Current text style: "Standard" Text height: 0.0833 Annotative: No Current text style: "Standard" Text height: 0.0833 Annotative: No Current text style: "Standard" Text height: 0.0833 Annotative: No Current text style: "Standard" Text height: 0.0833 Annotative: No
Is there a way to programatically set a visual style before a drawing actually opens?
We have some huge models and people seem to forget to change their visual styles back to 2D wireframe before saving and exiting drawings. Some models will crash on some workstations when trying to open in a rendered mode.
I found a lisp with a function that looked to set viewport visual styles. But it does not seem to be supported anymore. --> (vla-put-VisualStyle vport 1)
I am trying to create a lisp routine, that will check the dimension style "standard" to see if its annotative. If it is, I need it to turn annotative to off.
ITO - Application Management Factory Design Suite Ultimate 2012 AutoCAD 2012 | Inventor Professional 2012 | Vault Professional 2012
I am trying to use autolisp to change the point label style in autolisp. Mostly teach you how to do it manually, I not sure there is a way to do it in autolisp.
Is there a way to get model space to "display plot styles" through a lisp routine or a script?
i'm currently setting up a whole bunch of custom tool palettes for the company I work for and instead of the icons displaying in their actual colour (at the moment they're green, which doesn't show up very well on the light grey background), I'd rather they show in the plotstyle assigned to the individual dwg's.
call up the page setup manager (while in model space) and click modify, you can then check the radio button to "display plot styles" in the top-right corner. But when you have around 100 - 200 blocks to change, that process can be rather time consuming and cumbersome!
I have some working code that sets the Text Style name to ROMANS inside my Mleader Style called ARROW. Here it is:
(setq dict (dictsearch (namedobjdict) "ACAD_MLEADERSTYLE") ; start setq q dict1 (member (cons 3 "Arrow") dict) ; code 3 is Mleader Style Description el1 (entget (cdr (assoc 350 dict1))) ; code 350 is dictionary entity handle er (tblobjname "style" "Romans") ; new value for MLEADER Text Style ) ; end set (entmod (subst (cons 342 er) (assoc 342 el1) el1)) ; code 342 is MmTextStyleId - write new vale to mTextStyleId
I want to modify this code so that it sets the Arrow Head Size to a specific value, say 0.125. Having a tough time figuring out the DXF codes and tblobjname to do this.
The PARTS LISTS on our old drawings are simply text entities and lines. Some are MTEXT. But our new drawing template has us creating our parts list using the actual AutoCAD TABLES entity.
I'm looking for the best method to go from lines and text in AutoCAD, to an AutoCAD table. As of now, I have to retype everything since I can't select a column/row or group of text entities, copy/paste into a table.
Any LISP function that will allow me to go from TEXT and LINES to a TABLE? I've tried B2E (lisp name) but it's not working - found that on a lisp site somewhere.
I want to change a lot of table cell text in one time, try to explain something.
In the front of my drawings i have a view tables. in the second column stays a code that represent a location.
e.g. LVC stays for Low voltage cubicle. Now it is my intention to substitute these code to the description of code in one time and only the second column. The several descriptions are written in an .txt file, like LVC;Low voltage cubicle and on the next row LVP;Low voltage panel, and so on.
I think it is only possible with Lisp? or there are other way?
In the past i did it one by one, because mostly there where 2 or 3 tables, now i have a big project with more than 20 tables.
I am trying to speed up some basic drafting of text revisions. In the P (plumbing) we call out the fixture units for a water pipe, along with the fixture units, the pipe size changes.
Is there any way to add numbers in an attributed block? (I have a lisp that works on text & mtext, but not attributes)
1.1. Example: Like if you have a block with two attributed text fields, the 1st field {x} is a number (fixture unit), and the 2nd field {y} is a number (pipe size). I would want it to only add the 1st text fields. [If possible then change the 2nd text field according to a changeable chart. (see #2)]
1.1.1. This is how the block looks like: x (y") 1.1.1.1. x could be any number from 0.5 – 10,000 (only using 1 decimal place, and only as needed) 1.1.1.2. y could be any number from the following list: ½, ¾, 1, 1¼, 1½, 2, 2½, 3, 3½, 4, 5, 6
Is there a way like in excel that you can set up a formula that will give a numerical result depending on other input? Like pipe size that change depending on the number of fixtures. There would need to be two different formula, one for hot and one for cold values (The value would be set at the beginning of the job; typically these values would not change later in the job). This could be separate text or if possible using the attributed block as described in #1.
2.1. Example: Like if you have a block with two attributed text fields, the 1st field {x} is a number (fixture unit), and the 2nd field {y} is a number (pipe size). I would want it to change the 2nd text fields according to the value in the 1st text field. If the value in {x} is 0.5 – 1.0, it would result in ½; 1.5 – 7.0 = ¾; 7.5 - 17 = 1; 17.5 – 36 = 1¼; ect.
2.2. In excel it would be =IF(x)<1,"1/2",IF(x)<7,"3/4”,IF(x)<17,"1",…{all #’s in between} …IF(x)>5000,"6")))))
I have created a table style in ACAD 2012 with all of the cells formatted to what I need. The trouble begins when I bring in a BIAS excel data link to populate the table. I have tried every option in the insert table steps and have even tried all the different options under the modify excel link options. I have toggled the use excel formatting on and off, which does change the table size a small bit, but does not allow the table style to take affect.
I have attached a screen shot of the "good" and "bad" tables. The bad table is what the good table comes in as and it is also what happens everytime the table link updates. It always reverts back to the bad style and then I have to change the table back to the good one by hand - changing each column individually.
Is there a way to attach a data link to a table with the table style holding its shape and formatting?
This happens on all of my drawings and using all kinds of different excel links.
What is the best way to change the color of two pieces of specific text in lisp? I want to change where it says (strcase ln6) & (strcase ln7) to the color of green. I tried it a couple of different ways but I'm having some trouble. First I am setting the current layer with a color of blue. I am then running the text command a couple of times. I want to run the mtext command a couple of times but I want the text to be green & I want the width factor to be .85
I am working with a template, that doesn't allow me to change the dimension style. In the project the Use Style Library is set to Read/Write. I have created my dimension style, at this point just a copy of the ANSI standard with a text size difference. I went to my template and set that syle as my default, and saved it. Now the fact that it doesn't automatically update the drawing I had alreadycreated is a nuisance, however if I creat a new drawing, the style has reverted to a different standard, that is not even the ANSI default. If I right click a dimension and change the dimstyle to what I saved it does update, but if I try to change the style again it defaults to a random dimstyle, AND changes the style even if I hit cancel. So... the question is how to make the changes stick?
how to make a toolbar button so that when i click it and select a few single text, it will automatically change the text base point to be at "MIDDLE CENTER"....
At the moment, i use to create a button with macro of " ^C^C_text;j;mc "....But the problem is whenever i use this button, i still need to type "MC" at the command prompt.. How to make it so that after i click the button, all i need to to is just select the text..
How do you set the text style for cells in a table? I used to be able to set the title row, head row and data row text style in vba. In vb.net I tried using <tablestyle>.SetTextStyle but it is asking me for an ID.
I am looking for assitance with the VB code to change the text style within a custom table when it is created from a VB standalone program. I am using Inventor 2013 and VB 2010 Express.
I have a customtable that is created within a .idw, and I would like to have the data cells set to "Table_Cells" style that I have created. I cannot find anything in the help file with a sample code to build off.
I figure it's got to be something with oCustomTable.DataTextStyle but beyond that I am lost.This is what I have, and VB is kicking it back in my face.
Dim oTextStyle As TextStyleoTextStyle = oCustomTable.DataTextStyle.StyleType("Table_Cells") Error 2 'Public ReadOnly Property StyleType As Inventor.StyleTypeEnum' has no parameters and its return type cannot be indexed.
i failed to find one which would change string of a text to other for all types of objects. I mean it was usually either only multitext, or only text, dimensions or attributes.creating one which would change in abt 200 drawings:
-001
-002
-003
to:
-00001
-00002
-00003
in attributes, text, multittext, leaders, multileaders, dimensions..... at the same moment?
It is meant to be used in ScriptPro (by loading lisp in script).
If not possible, then can also open each file and run the lisp in each of them - still would save lot of time.
