AutoCAD Visual LISP / AutoLISP :: Losing Text Style When Use Entmod On An Attribute
Feb 25, 2013
I have a lisp function that is updating attribute values on a newly inserted block. The lisp function uses entget to read the attribute. Then it plugs a new value into the assoc 1 using subst, then uses entmod to update the attribute's value. It all works fine except that the attribute loses its style, i.e. assoc 7, somehow. If I do an entget on the attribute right after the entmod the assoc 7 is nil. The symptom on the drawing is that the attribute value is not visible until I close and open the drawing.
This only happens on a newly inserted block on existing drawings. If I close the drawing and reopen it then the lisp function works fine. Or If I insert the same block on a new drawing it all works fine. what would cause the assoc 7 to go missing after an entmod to change the attribute value?
View 9 Replies
ADVERTISEMENT
Jun 10, 2010
I would like to use the entmod method to rotate the text in a Multileader object. Reading the DXF code tells me the dotted pair of 42 seems to be the rotation angle, but entmoding that does nothing. Obviously I don't know how to modify this complex object.
View 3 Replies
View Related
Jun 29, 2012
I am looking for a way to change the text style used by a table style with Visual LISP. So far I have been able to get the IAcadTableStyle object from the acad_tablestyle dictionary, but there is no property for text style. Is this even possible? Code and results are below.
(defun DumpTableStyles ()
(setq dict (vla-get-dictionaries (vla-get-activedocument(vlax-get-acad-object))))
(setq TableStyles (vla-item dict "acad_tablestyle"))
(vlax-for TableStyle TableStyles
(vlax-dump-object TableStyle)
)
)
[Code]....
View 3 Replies
View Related
Apr 29, 2013
I run into some issues where i need to change an attribute based on where a block is located on a drawing. I started this routine to select the block, and then select the text that I want to change the block attribute to. It seems like everything is working up until this point. What I want to do is then replace the first selected with the second selection. How would I go about doing that? here's my code so far:
(defun C:uf ()
(if (setq fuse (nentsel "
Select Fuse Attribute: "))
(progn
(setq en (car fuse))
(setq enlist (entget en))
(setq fuseatt(cdr (assoc 1 enlist)) ) ) )
(if (setq mt(car (entsel "
Select Text: ")))
(progn
(setq enlist2 (entget mt))
(cdr (assoc 1 enlist2))
(setq wiren(cdr (assoc 1 enlist2)) ) ) )
)
View 8 Replies
View Related
Jun 24, 2012
I have a block "MANAGER" with Two Attributes "CETOP" and "CEBOT" I would like a lisp to replace what ever is in those attributes with defined text, for my purposes "Text1" and "Text2". I would like a simple routine that even I can understand so I can apply it to a couple of other lisp projects I have.
View 6 Replies
View Related
Oct 27, 2012
I would like to globally rotate an attributes text to be horizontal. When a block containing and attribute is inserted at a rotated angle the attributes text is of course also rotated - The tag is called circuit so I tried this - need some lisp to alter the size of the text?
(prompt "
Pick your Blocks..")
(setq ss (ssget '((0 . "insert")))
sl (sslength ss)
[Code] ......
having tried this which did not work
(prompt "
Pick your Blocks..")
(setq ss (ssget '((0 . "insert")))
sl (sslength ss)
[Code] .....
View 9 Replies
View Related
May 17, 2013
I wanna change my block name to attribute text value, any similar lisp code?
View 9 Replies
View Related
Sep 16, 2012
I need to be able to batch process a bunch of title block attributes automatically.
Block Name: Title Block
Tag Name: SH
Currently they come out with just the number 1, 2 , 3 etc I need to add a leading zero ie 01, 02, 03 etc
All the scripts I have will just replace the number with another
I just want to append the zero infront of the existing number
ie the code will need to read the existing number and decide if its less than 10. if it is less than 10, then the code just needs to append the leading 0. if its 10 or over, then do nothing.
View 4 Replies
View Related
May 3, 2013
Looking for routine for converting text to attributes inside the block?
In my drawing I hv some attribute blocks having some Text in it. I need to change the Texts inside the blocks as Attribute Texts. I am attaching sample Blocks drawing..
View 9 Replies
View Related
May 9, 2013
How to export title block attribute text .. in a order from different layout .? file ext .xls or .txt i got a tool named Autocad Automation tool but it not work very well autocad have data extraction - its also came all text .. and not in order .. can we develop the any lisp for that ?.
View 4 Replies
View Related
Nov 29, 2012
I cannot purge a textstyle out of my drawing. When I run purge nothing is available.
However if I select the style from the style dialog I am able to select delete and delete the style.
When I use the method on the style (vlax-invoke-method style 'Delete). AutoCAD states:
Automation Error. Object is referenced by other object(s)
The style is defenatly not in use but may have been used in the past.
View 8 Replies
View Related
Dec 16, 2013
I am trying to put together a LISP that changes the font of two text styles. One bing named "Standard", and the other "WD".
This is what I have so far...
(defun C:CHANGESTYLE (/ entities len count ent ent_data ent_name new_style_name)
(command "STYLE" "Standard" "Romantic" "" "" "" "" "")
(setq entities (ssget "X" '((0 . "TEXT")))
len(sslength entities) count 0);
[Code]....
I couldn't figure out how to select mtext and text all in one swoop, so i ran it twice
Now, when i run this code, i get the following error "lselsetp nil".
CADMASTER TECHNOLOGIES, LLC
[URL]....
View 3 Replies
View Related
Aug 4, 2013
I have inside every text,Mtext contents different text style like Arial_1 , Arial_2.
How i can give all the contents inside one style ? the normal procedure i will enter inside text to enter editing mode and changing text format style one by one. I want it once.
I want to save my routing of entering every text to change its content text style.
(Notice:select all from outside without editing mode will not do the job)
View 2 Replies
View Related
Jan 6, 2014
Convert Fields to text in my Title Block. I want to change some specific attributes only to convert into texts in my title block ( "MODE_A3" is my Title Block name).
For example in "MODE_A3" block having lots of tags like TAG1, TAG2, TAG3 upto TAG10 with fields. I need to change TAG3, TAG4, & TAG5 attribute fields into texts in all layouts.
View 6 Replies
View Related
Jun 5, 2012
I wrote (setq oldtext (getvar "textstyle")) to save the current text style,
(setvar "textstyle" (getvar "dimtxsty")) to change the text style to the current dimension text style (which appens to be romans) and later (setvar "textstyle" oldtext) to restore the text style to its original setting but it won't work.
This is the same format used to save and restore osnap in many lisp routines.
When I check the program in the visual lisp editor, oldtext returns "standard" (the original text style - so that part works) but "textstyle" returns nil. I even tried (setvar "textstyle" "standard") to no avail. "Textstyle" remains romans.
View 5 Replies
View Related
Apr 5, 2013
I have very little knowledge in complex Autolist routines and routine to do the following:
I would like to be able to provide a Prefix and/or Suffix via dialog then pick any line of text or multiple lines of text and have it concentrate. For example: Prefix: First Floor Suffix: M100. I pick the room text on an arch floor plan "Mechanical room" and the second line "100" The result will be "First Floor Mechanical room 100 M100".
But lets take it a final step further; once condensed, I want it added to a perticular tag attribute in a block I inserted.
Example of how I would use it. I insert a symbol for an addressable smoke detector that has several tags; one of them being Location. I would use this routine to gather the information provided by the Arch floor plan and join it with the block attribute for exporting later for use in the Fire Alarm Panel Programming.
attached is a sample block with the attributes.
View 9 Replies
View Related
Sep 9, 2010
im my current coding project im attempting to change the font stlye of 1 text item
i tried used the simple method of
[code]
(command "STYLE" "simplex" "ARIAL" "" "" "" "" "")
[/code]
however, using this changes the text's font in the whole drawing
i searched the forums here and everything i found either didnt work or changed all the text.
is there a more elegant way of doing this with just a selected text item and not the text in the whole drawing?
View 7 Replies
View Related
Jul 3, 2012
I wanna transfer my attribute block values to another attribute text blocks , is there any lisp for that?
Is there a possibility for sum tag values of choice attribute blocks to inside of another attribute text block ?
View 2 Replies
View Related
Dec 8, 2011
Background: Someone exploded an attribute block and copied it hundreds of times throughout a project, each time changing the Attribute Tag to match the Value they expected to appear in their drawing. The drawing must be xrefed, so the attribute definitions do not appear.
(There is only 1 attribute in the block.)
Proposed Solutions:
1:AutoLISP routine which copies Tag data from Attribute Definition into Value of Attribute Block:
Prompt-Select Attribute Definition
Copy Tag data
Prompt-Select Attribute Block
Paste data into Value
(Allow repeat to speed workflow)(*PREFERRED*)
2:AutoLISP routine which copies Tag data from Attribute Definition into Default Value and creates a new Block:
Prompt-Select Attribute Definition
Copy Tag data
Paste data into Default Value
Create New Block
(Select Multiple Objects)(Creates tons of new blocks which are messy)
View 3 Replies
View Related
Nov 3, 2011
I'm running the following string in a routing that is looping so I get dozens of these prompts. How to supress these? Or, do i have to use to entmake?
(begin loop...
(command ".-Mtext" CSW-Tpoint "W" 0.0 (vl-filename-base (vla-get-imagefile image)) "")
);end loop
Prints to the command line..
Current text style: "Standard" Text height: 0.0833 Annotative: No
Current text style: "Standard" Text height: 0.0833 Annotative: No
Current text style: "Standard" Text height: 0.0833 Annotative: No
Current text style: "Standard" Text height: 0.0833 Annotative: No
View 3 Replies
View Related
Nov 13, 2011
Is there a way to toggle between customized old style menus and new style workspaces?
View 1 Replies
View Related
Jun 3, 2013
I am trying to find a lisp that would get an attribute value (tag name = NBR_5) . I'm trying to run a simple routine that would let the user place the value from the titleblock attribute as text on a drawing. I see a ton of articles regarding getting attributes but I am not well versed in programming.
View 9 Replies
View Related
Dec 30, 2011
Is there a quick way of getting the value of an attribute?
I have an attributed block called "tp_attributes" and it has and attribute called "OrderNum".
I just want to be able to quickly grab that value.
View 3 Replies
View Related
Oct 7, 2013
Is there a way to programatically set a visual style before a drawing actually opens?
We have some huge models and people seem to forget to change their visual styles back to 2D wireframe before saving and exiting drawings. Some models will crash on some workstations when trying to open in a rendered mode.
I found a lisp with a function that looked to set viewport visual styles. But it does not seem to be supported anymore. --> (vla-put-VisualStyle vport 1)
View 9 Replies
View Related
Aug 31, 2012
select all blocks on certain layers in a drawing, check attribute CIRCUIT in each block if it starts with MS then attribute CONTROL = switched. I hope thats clear enough the way
(defun c:control()
(graphscr)
(Setq sc (ssget "X" '((0 . "INSERT")
[Code].....
View 1 Replies
View Related
Jul 29, 2005
Say I have a block that contains two attributes, one contains a value that is a number and another contains a value that is letters. I have many of these blocks placed in a drawing, could you create a lisp that would return the sum of the number value and return it to the command line along with the letter value. Something like this:
Sum--------Item
128 RP
389 TD1
2389 SP4
View 9 Replies
View Related
Jun 17, 2013
I continue with my problems.....
I get attribute value from block and put it in a list:
(repeat (setq cnt (sslength sset))
(setq attValue (GetAttributeValue (ssname sset i) "tag1"))
(setq attValue2 (GetAttributeValue (ssname sset i) "tag2"))
[Code]...
When I try to put them in a table...
(foreach item lst
(vla-setText mytable
row 0
(last item)
)
(setq row (1+ row))
)
only put one ( attValue2) at column, and i like put 2 values, each one in a column in the same row
View 9 Replies
View Related
Nov 2, 2012
i want to select a block and the lisp copies TAG1 into my clipboard (i want to paste it in excel)
View 9 Replies
View Related
Jul 17, 2013
Lisp or lisp code for sum attribute tag values and paste result to an another attribute block tag?
i attached jpg for explain to what i want to do .
View 4 Replies
View Related
Mar 29, 2012
I need fix a block attribute named "NrPunct.dwg"
MyProblem: after I insert the block “NrPunct” in my drawing ,, I cannot modify "textHeight", when I edit the ATTDEF (or attribute) with the command “DDEDIT” . Why?
You see my arrow in the picture pozamea.jpg…
View 2 Replies
View Related
Sep 30, 2013
Is there any simple code for to sum length of lines which is i am choosing and copying result to chosen attribute tag ?
View 1 Replies
View Related
