I recently installed Inventor Premium 2012 and I am not able to make a bolted connection or creat a tapped hole. I get this error message: Invalid thread data table. Please check Thread.xls file.".
View 4 Repliesi get an error message telling (invalid thread data table. Please check Thread.xls file.i tried to reinstall the windows and the autodesk inventor but the error keep appearing.
1.my os is windows xp sv2 32 bit
2. inventor version is 2011 32 bit i also had the same problem with 2010
3. i tried to reinstall without any antivirus on my pc but i still have the same problem
4. what's a UAC?
5. yes i've office 2007 installed & i had tried with office 2003 but also the same problem.
1 the first time i used, i made the bolted connection once, but at the second time i kept having this issue.
2 my last trial was installing a freh copy of the windows then install office and the inventor only but nothing changed
3 i tried to install the inventor on another pc but i also had the same issue
4 i searched the c drive for the file THREAD.xls, and i found three of it and i guess they are fine.
Autodesk Inventor 2013.
Could not find file C:Program FilesAutodeskInventor 2013Design DataXLS13XLSen-USThread.xls containing thread data.
"Unknown value "AC1027" encountered in drawing version.Invalid or incomplete DXF input -- drawing discarded. Press Enter to continue." (then the file disappears)
MY workflow:I am opening up DXF files created by me with RASPLOT 2.5 and RASPLOT 3.0 (an Army Corp of Engineers Hyrdraulic model extraction program) I bring the DXFs into AutoCAD for better cleanup of the 2D graph it creates of flood profiles.
OBSERVATIONS:Others in my office have opened the same engineering models in RASPLOT and been able to bring DXFs into AutoCAD 2011/2012 in with no problem. It had worked for me in the past, but I can't recall what happened to all of a sudden make it not work, EVER. My co-workers can work with the RASPLOT DXFs in Windows XP and Windows 7.
ATTEMPTED SOLUTIONS:-I upgraded my RASPLOT version first from 2.5 to 3.0, then upgraded my AutoCAD2011 to 2012. No change.
-If I create the DXF on my computer, then open it remotely from another computer's AutoCAD, I still get the same error message. (My only solution has been to create my DXF by remotely logging into another computer with RASPLOT then it will open in my computer's AutoCAD.)
- I tried changing the .dxf file path to .dwg but that doesn't work.
what this error message means. I cant find any reference to it in the help files.
View 9 Replies View RelatedI have a baseplan I was sent for senior design project and it was previously created in an earlier version of autocad. However Im not sure which version it was created in. There are almost 3000 points and contours but I can not use these points to create a surface. I am ultimately trying to create a surface and then a profile for a road to design vertical curves throughout.
I cut out a few points and copied them into a new drawing due to the size of the actual file
I am using Corel Graphic Suite X3. I created one file of 330 MB. It contains text and images....
But now when i am opening this file it say "File contains Invalid Object" "IGNORE:ABORT:RETRY"..I chose every option but nothing seems to happen and corel draw gets hanged..I tried importing it..also i tried re installing it but nothing seem to work...
this file is very imp and i have to open it...Wht to do? Also any future precautions, if any?
And am i using the right version? Im mean is is because this is the lower version and i need 2 upgrade?
Yesterday I tried to make a table-driven I-feature of a few drilling paterns.
I want to use this for drawing steel manifolds. The I-feature is used to insert standard drilling paterns, for example a patern to fit a standard flange.
The only problem is, for the thread I used the thread feature, otherwise it doesn't show up in the I-feature.
But when I make a drawing of a part were this I-feature is used, the specification of the thread doesn't show up when I create a hole table, because in the I-feature, the thread is a separate feature.
I have problem with Hole and Thread load menu input Thread.
i see only Loading thread data spredsheet .Please wait
win xp x32
inventor 2013
By running this routine it returns the following error message:
ERROR: bad argument type: VLA-OBJECT 7
(defun _make_tblstyle (stlname / adoc acmcol tblstyle txh)
(setq adoc (vla-get-activedocument
(vlax-get-acad-object))
)
(setq acmcol (vla-getinterfaceobject
[Code] .......
I have authored a meter as an iPart before placing into Content Centre - it will be authored to be used in tube and pipe.
Some variants have Rc (ISO Taper Threads) ranging from ¼-2", and some have G (ISO Pipe Threads). The only way I could get it to change between the different thread types was to model threaded hole features, and change the thread spec in the iPart table. {I have included the part so you can see what I've done}
It works fine as an iPart, but after having placed it into content centre the following errors occur with the generated Parts: the threads fail, the holes do not compute (resulting in the failure of the authored Tube and Pipe work points and axes), also the bmp decal doesn't rotate properly.
The angle or radius are outside the table boundaries. I have used bend tables before and have not run into this. See screenshot. What I don't understand is that in the error dialog box the Thickness is correct the Radii are correct and the Angle is correct except it is showing a -90 degrees. Is that the problem? The negetive? Why is it showing a negative number. I can't change the way the part is formed. The problem seems to be with the lower left hand curl. It does go ahead and flatten it, but I don't trust the results when I have the three errors.
View 1 Replies View RelatedI'd like to use an "NPT" Hole Dialog thread but it doesn't show up in the Thread type list.But it does show up in the Thread Dialog/Specifications Tab/ Thread type list so it's available.
I definitely have "NPT" in my Thread.xls & I have my Options/Files set to point to the correct Design Data folder.
Inventor Suite 2013 Ultimate
My colleague installed IV2013. He has excel 2010 installed in his PC also. However he cannot create thread hole (thread option is grey out).
View 4 Replies View RelatedI can drill a hole as needed, but can't thread a hole at all. Not with the Tapped Hole function when drilling the hole, or after drilling the hole then using the Thread Tool. Inventor will just not let me create threads this way outside of cutting a coil.
View 9 Replies View RelatedUsing VB2010 Express to practice writing code to run things in Inventor 2012. I am an extreme beginner at this, and I am trying out a simple program that opens up Inventor, and when you click a button, it will open up the filename listed in the subroutine. I have attached a .jpg of my code. The program will open Inventor, and open the file, but as soon as the file is finished loading and displays on the screen, it throws the error you see in the .jpg.
View 2 Replies View RelatedI am trying to add a thread class to the thread.xls. (that part is ok)
The thread is M26x2.0
I can't seem to find any information for me to simply plug in the values into the .xls, so I am thinking that I have to crunch some numbers. which is fine. I just want to make sure that this image below is the correct the reference for this task.
using the pitch, I should be able to calculate all my min and max values, but the xls has class column and a tap drill column, how would I determine these values??
Inventor Professional 2014-Update 2 - AutoCAD Electrical 2014
Win7-x64 | ASUS P8Z77-V | i7 3770 -3.4 GHz | 32GB RAM |
240GB SSD | nVidia GTX 670 4GB - 320.49
I am receiving an invalid input message when trying to create a curve between two lines. My drawing units are set to architectural. The problem is summarized as follows:
1- In Lines/Curves menu, select curve between two lines.
2-Select first tangent
3- Select second tangent
4-Select radius option
5- Enter 8'6"
6- After entering the radius I receive an invalid input message.
7- But if I enter the radius as 102 (102 inches) the curve is created without any problem.
When I try to open any of the Hydraflow extensions, I get the following message: "Installation error Invalid installation. Program ending." I ran a repair from Windows, but get the same result. How to successfully open/use any of these Hydraflow components in 2010?
View 6 Replies View RelatedAfter I save a file for "Web & Devices," when I open it, it returns this message, "This file contains file info data which cannot be read and has been ignored." Will this cause any problem with the file once I place it in the website I'm building? I've never seen this message before on a photo I've edited. The changes I made involved color correction.
View 9 Replies View RelatedIs it possible to embedd data in a table so that a user can select from a group of data within one cell?
I use this technique quite often in Excel. One cell in a table can have various values: A, B, C, or D. While another cell can have a different set of values to choose from: BLUE, RED, ORANGE, or PURPLE. The user can pull down an arrow (similar to a dynamic block) and choose from a set list of values.
I had a hdd crash, I took the hdd to data recovery and they did recover something but some of the important dwg files are invalid.
From my understanding, computers use two files: pagefile.sys and hiberfil.sys to store data used at a given time, for quick access (and other reasons). I have these files from the broken hdd but I don't know how to open them.
How they can be opened? How to successfully recover dwg files from them? the computer does it all the time so there must be a way.
Error Message: "Class Not Registered." appears when opening an assembly.
Generally, the errors appears to stop the model from opening.
This error message (see attached) pop up, when I open more than 2 or 3 dwg files in autocad.
I am not sure how to correct it. I have a Windows 7 pro x64 system running Inventor 2012
I am trying to convert my AutoCAD inventor 2013 file to a standard 2007 file by going "Save As" "Save Copy As" and then "Autocad DWG File" but i keep getting up a message "problems encountered while saving the document" How do i repair this?
View 1 Replies View RelatedWhy isn't there a way to disable these messages? Or is there a way?
I cannot be bothered to fix the trivialities of my assembly, and each time I update anything, that's one more click. I don't care about the cross part associations, as the parts exist as they need to.
Messages such as:
Cross Part Association has failed
This is the reason why my departments at work are considering Solidworks - Inventor is simply clunky - and it doesn't matter if the assembly has errors because of the modeling "mistakes" I make in this regard - I just need to supress these messages and get the work done.
afterthought - I know how to break links and clear associativity - but I just need a way to supress the error message. This would be very ideal, as it takes a while to go and break links and clear adaptivity. Often times, these errors crop up as engineering makes change orders to the part and it just crops up after revisions.
Just wondering whether there is a way to integrate iLogic error message into VB.NET code.
For example, if use following sentence to read the data from spread sheet.
LengthFloat=GoExcel.CellValue("tank_data.xls", "Gauges", "llg_arm_lgth")
if there is no such cell of "llg_arm_lgth", the error message appears as in attached file.
Right now I want to use "try...catch... end try" in the iLogic code. I can duplicate the first line of the warning message using VB.NET code, but I can not reach the second line. Does the iLogic expose this error message through some function? or which VB.NET code does this job?
I make a change to the effected parts/assemblies. Save them. Close them. Then open the .idw drawing, it begins updating the views. Then I get this message:
"The attempted operation did not produce a meaningful result. Try with different inputs."
It doesn't effect all the views, only one view. The other five views get updated without issue. The one view that doesn't is the parent view to two of the other views that update just fine.
I've tried rebooting my machine. Checked in all the files and opened them fresh after a reboot.
I'm getting this message after creating a new tube run: "H6705-51.ipt can only be saved in the context of H6705.Tube and Pipe Runs.iam"
I've never had this error come up. I added a tube run to an assembly and just couldn't save the new run. I tried opening the main tube run file and also the individual tube run but I get the same kind of error message.
I used this command all the time in previous releases (when it was in the SDK tools). In 2011 Win 7 64bit, the dialog always says "cannot place at origin" or something similar yet it does place the component there but does not apply the constraints. (Also my "make components" command puts a slight offset to my parts which could be a related bug of some sort.) The only non-autodesk addins I have loaded are the trial kwikinsertnfix addin loaded and Brian Ekin's Sheetmetalextents addin loaded.
View 1 Replies View RelatedIs it possible to add data to a feature data table? Example: The shape file data downloaded from NRCS only has the Soil number for the State. As I check out features I would like to add data for the soil name, soil group, etc. as additional columns in the data table and have it available in the future by checking the feature back in to my local information.
View 2 Replies View Related