This error message (see attached) pop up, when I open more than 2 or 3 dwg files in autocad.
I am not sure how to correct it. I have a Windows 7 pro x64 system running Inventor 2012
I've been getting this fatal error message upon opening files.
It seems to be as I try to load x-ref's.
A couple of times I was able to successfully open RAW (Canon CR2) files as layers to stitch together, but now when I try to open a RAW file I get error messages.
View 5 Replies View RelatedWhen I try and open an Illustrator file, I get the error message "can't open the illustration".
View 2 Replies View RelatedPSCS6 with 12.0.4 update. Mac OSX 10.8.2 16GB 1333 Mhz DDR3 543 GB Available
I've recently become aware that other people are getting an error message when opening many of my my psd files if they are on earlier versions of PS and also on PSE, (including the latest version). The message is:
This document contains unknown data which will be discarded to keep layers editable. To preserve the original appearance instead, choose flatten to load composite data as a flattened image.
Three options follow: Flatten Cancel Keep Layers
When 'keep layers' is selected the file opens as normal. However, people with much earlier version (CS version 8) don't get the option to keep layers, and the layers are flattened when the document is opened.
I still have CS5 on my mac, and I find that if I take my finished file into CS5 and save it there, the customer does not get the message above, and the file behaves as it should. Those on very early version of PS can also open the files without any issues.
I've been using CS6 since it was released and have had to delve through all my files and save them in CS5. Not every file is affected and I've been unable to find a common thread.
OK then update. I select never show this message agian ever (my favorite ) - but guess what a it pops back up. Nothing is wrong with the assembly
View 1 Replies View Related have encountered an error message on opening Lightroom 4 using Windows 7 Pro 32 bit.
The message is saying - Error in reading preview cache.
The configured Heidi Driver cannot be loaded. Switching to default software.
View 3 Replies View RelatedOpening AutoCAD LT this morning no problem. Closed it down and then opened it up again about 10 to 15mins later and get this message (see attached pdf).
Windows XP.
I have succesfully installed Autodesk Inventor 2011 (Student License) on my Windows 7 (64-bit) operating system without any errors. I can open Inventor 2011, but when I try to open a new or existing file, Inventor suddenly closes and the 'Autodesk Inventor Error Report'-window opens, giving the following error:
Error: Unhandled Exception
When I go to my project folders and try to open any inventor file, the following message appears:
"Inventor.exe needs to register with he operating system and the following programs (Explorer) are running and may
prevent registration from succesfully completing. Autodesk recommends terminating the offending processes to ensure proper registration. Terminate these processes before continuing with the registration?"
If i cick 'Yes', the problem remains.
I've tried reinstalling, following the instructions carefully (installed as administrator), without success. I installed both service packs. I keep having the same problems, while in the past, it has been working perfectly, but I lost it because of hardware problems, which are now resolved.
Technical Info:
OS: Windows 7 64-bit
Processor: Intel(R) Core(TM) i5 CPU M430 @ 2.27GHz
4,00 GB RAM
ATI Mobility Radeon HD 5650
Had no problem installing the PS CS4 (update from CS3). On opening PS the first time, and every time after, I receive an error message:
"OWL Orphanage: Photoshop.exe - entry point not found."
This is followed by a bunch of numbers or addresses. After I shut the message, the program opens normally, and as farr as I've explored it, functions OK. Haven't had time to really explore things.
Any idea what is producing this message?
I tried to open a photo (photoshop 5.5) and got this error message:
"cannot open the document because of a disk error'
I went to 'open' Then the dialog box opened and I clicked on the photo to op
en (the image is visible in the box) and then I click 'open' and got the mes
sage.
My system has deleted all the temp files. The photo files are in a folder
in 'my docs' so i know they are there and can be opened.
I have run LR 3 for some time and it has worked well. I have been away and when I now wish to run the program I get an error from Microsoft C++ runtime library saying that the program has requested to terminate in an unusual way. Re-installing LR has not solved the problem
View 4 Replies View RelatedDeleting files and saving files brings up an error message. Files can't be deleted from lightroom which makes editing a nightmare. Also Saving Files (raw of jpeg), brings up an error message everytime.
View 1 Replies View RelatedMy CS6 stops all time, almost minute to minute. When it happens, I see some files with .tmp extension.what is that and solve my problem, because it's causing me a lot of trouble to my workflow
View 14 Replies View RelatedI have used Lightroom for awhile and now I cant import any images. I recently got a new camera (D600) and thought that that was the problem but i cant get any images to import. Even form my D7000. I have checked my disc permissions and updated everything i can. What am I missing? I keep receiving an error message 535 files cannot be read. I am however able to import images onto my desktop and into Apeture....
View 4 Replies View RelatedWhen trying to import files to Lightroom 4 from my camera or a file folder, there is an error message that reads "files could not be read". This just started a week ago and I'm not sure what changed to cause the problem. I use a Canon 7D and I shoot in RAW.
View 10 Replies View RelatedError Message: "Class Not Registered." appears when opening an assembly.
Generally, the errors appears to stop the model from opening.
I am trying to convert my AutoCAD inventor 2013 file to a standard 2007 file by going "Save As" "Save Copy As" and then "Autocad DWG File" but i keep getting up a message "problems encountered while saving the document" How do i repair this?
View 1 Replies View RelatedWhy isn't there a way to disable these messages? Or is there a way?
I cannot be bothered to fix the trivialities of my assembly, and each time I update anything, that's one more click. I don't care about the cross part associations, as the parts exist as they need to.
Messages such as:
Cross Part Association has failed
This is the reason why my departments at work are considering Solidworks - Inventor is simply clunky - and it doesn't matter if the assembly has errors because of the modeling "mistakes" I make in this regard - I just need to supress these messages and get the work done.
afterthought - I know how to break links and clear associativity - but I just need a way to supress the error message. This would be very ideal, as it takes a while to go and break links and clear adaptivity. Often times, these errors crop up as engineering makes change orders to the part and it just crops up after revisions.
Just wondering whether there is a way to integrate iLogic error message into VB.NET code.
For example, if use following sentence to read the data from spread sheet.
LengthFloat=GoExcel.CellValue("tank_data.xls", "Gauges", "llg_arm_lgth")
if there is no such cell of "llg_arm_lgth", the error message appears as in attached file.
Right now I want to use "try...catch... end try" in the iLogic code. I can duplicate the first line of the warning message using VB.NET code, but I can not reach the second line. Does the iLogic expose this error message through some function? or which VB.NET code does this job?
I make a change to the effected parts/assemblies. Save them. Close them. Then open the .idw drawing, it begins updating the views. Then I get this message:
"The attempted operation did not produce a meaningful result. Try with different inputs."
It doesn't effect all the views, only one view. The other five views get updated without issue. The one view that doesn't is the parent view to two of the other views that update just fine.
I've tried rebooting my machine. Checked in all the files and opened them fresh after a reboot.
I'm getting this message after creating a new tube run: "H6705-51.ipt can only be saved in the context of H6705.Tube and Pipe Runs.iam"
I've never had this error come up. I added a tube run to an assembly and just couldn't save the new run. I tried opening the main tube run file and also the individual tube run but I get the same kind of error message.
I used this command all the time in previous releases (when it was in the SDK tools). In 2011 Win 7 64bit, the dialog always says "cannot place at origin" or something similar yet it does place the component there but does not apply the constraints. (Also my "make components" command puts a slight offset to my parts which could be a related bug of some sort.) The only non-autodesk addins I have loaded are the trial kwikinsertnfix addin loaded and Brian Ekin's Sheetmetalextents addin loaded.
View 1 Replies View RelatedMy Lightroom has unexpectedly stopped exporting files. Nothing that I am aware of has changed--I haven't changed cameras or added new software. No error message comes up, it just does nothing after the Export dialog box.
View 2 Replies View RelatedI am reorganizing my file structure in LR4. I can move jpegs from one folder to another but I get an error message when I try to move the NEF files. I saw another discussion that mentioned that Lightroom has a problem moving NEF files. I don't have a large collection yet (less than 10,000 images) but I have made extensive edits on many of the shots so I don't want to import them from scratch again.
View 8 Replies View RelatedI have Photoshop 7 installed (or at least, it was installed) on my Dell laptop (which is running on Windows 2000 still). I've had it for nearly a year now and it has never had any problems before, but a couple of days ago when I tried to open the program, it just shut down.
There was no error message or anything; it just booted up, got to the point where it said it was initializing, and then disapeared. Since then I have tried re-installing it twice with no luck. Can anyone possibly help me out with this?
what this error message means and how to fix it?
View 2 Replies View Relatedinfo on the following error message when saving to the style library.
View 5 Replies View RelatedI try to setup Photoshop on my computer an error message pops up saying that an error has occured during the setup with a bunch of numbers. I don't know what to do and its really annoying because I need photoshop on my computer and it won't allow me to install it. Someone please help. Am I missing files that are needed to install it or what? Also does anyone know how to reinstall .dll files that were accidentally deleted.
View 6 Replies View RelatedI have a text parameter "ARM_TYPE" that kicks out a numaric parameter "ARM_ANGLE" through an ilogic rule. My problem is i need to have the rule kickout an error when (ARM_TYPE= "none"). I can do this by changing the "ARM_ANGLE" parameter from a Numaric to Text format (see below). The problem here is that "ARM_ANGLE" is used in several more ilogic rule calculations generating other parameter values which also need to kick out an "error"
If Parameter("ARM_TYPE") = "A995" ThenParameter("ARM_ANGLE") = -12ElseIf Parameter("ARM_TYPE") = "A1023" ThenParameter("ARM_ANGLE") = -3.7ElseIf Parameter("ARM_TYPE") = "A1081" ThenParameter("ARM_ANGLE") = -44.1ElseIf Parameter("ARM_TYPE") = "NONE" ThenParameter("ARM_ANGLE") = "####"End If