AutoCAD Inventor :: Getting Error Message When Updating IDW Views
Nov 10, 2011
I make a change to the effected parts/assemblies. Save them. Close them. Then open the .idw drawing, it begins updating the views. Then I get this message:
"The attempted operation did not produce a meaningful result. Try with different inputs."
It doesn't effect all the views, only one view. The other five views get updated without issue. The one view that doesn't is the parent view to two of the other views that update just fine.
I've tried rebooting my machine. Checked in all the files and opened them fresh after a reboot.
When trying to install the recent update for CS6 through the Application Manager (or Creative Cloud) this ends always with the error message U44M1P7. This the 1st time that aPS6 update does not work on my PC. I have Windows 7.
I made a drawing and later changed the part to an ipart.
The dimensions of the table part in the drawing are o.k. but the iproperties, the contents of the logo doesn't update and it has a strange number string.
There is the yellow lightning symbol and even though i press update all sheets nothing happens and also the lightning symbol remains
We have a conveyor belt profile, which covers a length of 2330 meters and a height of 150 meters. We have a place a elevation view of the profile in an idw file at a scale of 1:2500.
We would normal place detail views on the elevation view to zoom in on key areas of the belt, i.e. drive area etc. In all previous release of inventor had no problem. However Inventor 2013 displays the following error. **************************************************************************************************************************************** Create Profile and Section View: Problems encountered while executing this command.
The specific inputs did not create sweep geometry (faces and.or edges). Try by changing path geometry and/or create the profile on a sketch plane that is perpendicular to the path and contains one of the path vertices. **************************************************************************************************************************************** I have attached the part file and also the idw file that we are using.
I am trying to convert my AutoCAD inventor 2013 file to a standard 2007 file by going "Save As" "Save Copy As" and then "Autocad DWG File" but i keep getting up a message "problems encountered while saving the document" How do i repair this?
Why isn't there a way to disable these messages? Or is there a way?
I cannot be bothered to fix the trivialities of my assembly, and each time I update anything, that's one more click. I don't care about the cross part associations, as the parts exist as they need to.
Messages such as:
Cross Part Association has failed
This is the reason why my departments at work are considering Solidworks - Inventor is simply clunky - and it doesn't matter if the assembly has errors because of the modeling "mistakes" I make in this regard - I just need to supress these messages and get the work done.
afterthought - I know how to break links and clear associativity - but I just need a way to supress the error message. This would be very ideal, as it takes a while to go and break links and clear adaptivity. Often times, these errors crop up as engineering makes change orders to the part and it just crops up after revisions.
if there is no such cell of "llg_arm_lgth", the error message appears as in attached file.
Right now I want to use "try...catch... end try" in the iLogic code. I can duplicate the first line of the warning message using VB.NET code, but I can not reach the second line. Does the iLogic expose this error message through some function? or which VB.NET code does this job?
I'm getting this message after creating a new tube run: "H6705-51.ipt can only be saved in the context of H6705.Tube and Pipe Runs.iam"
I've never had this error come up. I added a tube run to an assembly and just couldn't save the new run. I tried opening the main tube run file and also the individual tube run but I get the same kind of error message.
I used this command all the time in previous releases (when it was in the SDK tools). In 2011 Win 7 64bit, the dialog always says "cannot place at origin" or something similar yet it does place the component there but does not apply the constraints. (Also my "make components" command puts a slight offset to my parts which could be a related bug of some sort.) The only non-autodesk addins I have loaded are the trial kwikinsertnfix addin loaded and Brian Ekin's Sheetmetalextents addin loaded.
I have a text parameter "ARM_TYPE" that kicks out a numaric parameter "ARM_ANGLE" through an ilogic rule. My problem is i need to have the rule kickout an error when (ARM_TYPE= "none"). I can do this by changing the "ARM_ANGLE" parameter from a Numaric to Text format (see below). The problem here is that "ARM_ANGLE" is used in several more ilogic rule calculations generating other parameter values which also need to kick out an "error"
I am looking to batch convert my IDWs to AutoCad DWGs without having to go through and manually open each file and save as etc. Right now I am using the export files task to do this. I have saved an *.ini file with all the settings I want and successfully create the task. After running the task it fails to convert all the files giving me an error message that says "File has unresolved references". This shouldn't be the case though because the IDW's open and reference the part/assembly files fine.
Autodesk Inventor Professional 2010 32bit edition SP3
I recently installed Inventor Premium 2012 and I am not able to make a bolted connection or creat a tapped hole. I get this error message: Invalid thread data table. Please check Thread.xls file.".
When I suppress a part or a sub-assembly in Inventor 2013 and then right click on the suppressed item in the browser window I always get an cadabundus error message (see attachment), after I press OK I get the normal right click menu hovering over the item.
I have Inventor 2013 RTM 64 bit Build 138, and running on Vista 64bit.
The company I work for recently updated a few of our computers with the SP2 for Civil 3D 2013. After this update, every time I create a surface profile, things get all messed up. Like I have done dozens of times before, I create the profile then open the profile creation tools. I am using the draw tangents with curves tool and as soon as I click my first tangent point, it shows up about an inch over to the left. I have struggled through and used the grips to edit after the fact but this used to be a VERY easy task. FYI my snap isn't on or anything goofy like that and when opened on a computer without the service pack, it works as it should.
I'm using AutoCAD 2012 LT and have having problems inserting/updating/editing fields. This is the error that appears
"There are no registered modules to edit fields or demand loading is currently disabled". When I click OK the Field pop-up appears empty! (see attached)
The BEDIT command is also not working. It was all working up until a few days ago! I have downloaded the most recent Service Pack and it's still not working.
A user is having issues with plotting from AutoCAD LT, when trying attempting a normal plot to PDF the program crashes and he is forced to close it, also when changing the way he plots to plot to DWG PDF it starts to work correctly but brings up a fatal error message as below and attached:
FATAL ERROR: Unhandled Access Violation Writing 0x0014 Exception at 778e224dh
When i try to convert my .dwg to a pdf on my laptop (second computer) i get an error message that the drawing might be password protected. it happens on all my autocad drawings
Every time I try and plot a drawing I get this error message:
' YOU CAN NOT USE MULTIPLE INSTANCES AT THE SAME TIME'. The program then freezes for a short while then returns a message saying plot canceled.
I am using Map 3D 2011. Although I did have a trial version of AutoCad 2012 I had no problems plotting on both versions up until recently I have made no changes to any printer configuration, plot files or styles. I removed 2012 after I started getting this message but still I am unable to plot.
i'm working with this dwg that has a block in it that says "cannot be exploded" every time i try to explode it. is there anyway i can still get this thing exploded?
I am getting an error message when I am trying to insert a schedule room tag. It does not matter which room tag out of the content browser I select, I get the same message. the message is as follow: "No symbol has been specified for the tag" All of the tags have worked up until today. Nothing has changed that I know of on our network and all of the paths seem to be pointing to the correct directories. We are currently using Architecture 2008. This problem is only coming up with these specific room tags.
I'm trying to export some blocks w/ object data to a shapefile. Error message is "Export did not succeed." ... very informative! I've also tried without attaching attributes, going to SDF, restarting the computer, repairing my installation. Nothing has worked. why Mapexport is broken now?
