AutoCAD Inventor :: Error Creating Detail Views
Jun 26, 2012
We have a conveyor belt profile, which covers a length of 2330 meters and a height of 150 meters. We have a place a elevation view of the profile in an idw file at a scale of 1:2500.
We would normal place detail views on the elevation view to zoom in on key areas of the belt, i.e. drive area etc. In all previous release of inventor had no problem. However Inventor 2013 displays the following error.
****************************************************************************************************************************************
Create Profile and Section View: Problems encountered while executing this command.
The specific inputs did not create sweep geometry (faces and.or edges). Try by changing path geometry and/or create the profile on a sketch plane that is perpendicular to the path and contains one of the path vertices.
****************************************************************************************************************************************
I have attached the part file and also the idw file that we are using.
View 6 Replies
ADVERTISEMENT
Jul 1, 2012
Is it possible to copy a section view or detail view from one sheet to another, without having to copy the base view?
If so how?
If not, why?
View 1 Replies
View Related
Mar 26, 2013
im trying to make an template we can use as default template..
now when i make a section view or a detail view of a part, the annotation is placed above the section view..
I would like to have that underneath the view.
I know can drag it down there, but is there a way to have the annotation underneath the view when its created? would save me and the rest who is going to use the template a lot of time..
View 2 Replies
View Related
Nov 6, 2013
When i set a specific Plane in my new Level of Detail (Right click on the box set this view as "top") and save, i switch back to master and now the view from the new level of detail transferred over.
How can i make custom top,front,right niews for my new level of detail so it wont affect other details (especially my master view).
View 8 Replies
View Related
Oct 23, 2012
I've had this issue now for quite a while. Seems to only happen with wires that are made in the Cable & Harness module. And the odd part is that not all wires do this and not all View Rep/Detail views do this.
Regardless of wether I have a wire visible or not in a locked View Rep it still shows up in the Detail View on the .idw. And yes, I have the 'associative' check box checked.
I've unchecked the check box, nothing. Rechecked the box, nothing. Updated the views individually, nothing.
View 3 Replies
View Related
Jun 6, 2012
Working with Inventor 2012: I have a rather large assembly (over 3000 parts) that was worked on by an outside engineering firm and includes several different Levels of Detail & Views under Representations. When they originally Pack 'n Go-ed the whole assembly and related .idw's over to us, all the .idw's seemed to show every view correctly without errors.
However, I've now went into the assembly and made several modifications to the overall master assembly and a few sub-assemblies within it (adding/deleting a few parts, nothing major). Now when I try to open a few of the master assembly .idw files, all the section & detail views have become full model views, losing their "cutaway" views. See the attached before & after pictures.
I've went back in to each .iam and made sure that the level's of detail & Views match the way the file was originally given to us but I can't seem to get the cutaway views back again.
View 9 Replies
View Related
Jul 9, 2012
Is there a way to customize the fence labels for detail and section views?
I know we can edit the label directly and add/remove text, but is there way to change the appearance of the label as well, with say a sketched symbol or other graphical representation like a balloon or other customized image?
View 4 Replies
View Related
Jul 15, 2013
Lets say I have 2 page drawing set of a damper, page 1 contains the main views and all the related part number ballons.
Page 2 contains fabrication details for the parts, brackets, blades etc.
For the parts I just inserted those into the drawing from their respective part file, allowing me to create the necessary amount of views to capture the needed dimensions for the shop.
When I go to apply a balloon to that part it wants to make it part #1 when it may be part # 7 of the assembly.
Inventor 2014
Windows 7 Pro SP1
Intel(R) Core(TM) i7-3770k CPU @ 3.50GHz
16GB RAM
NVIDIA Quadro 4000
3D Connexion SpaceMouse Pro
View 8 Replies
View Related
Dec 13, 2012
Is it possible to create projection views of a solid model part? I want to make a front, top and right side view of the part in solid model form all on the same part file. I thought I could copy the part in each view but "help" says I can't copy a solid model.
View 4 Replies
View Related
Nov 10, 2011
I make a change to the effected parts/assemblies. Save them. Close them. Then open the .idw drawing, it begins updating the views. Then I get this message:
"The attempted operation did not produce a meaningful result. Try with different inputs."
It doesn't effect all the views, only one view. The other five views get updated without issue. The one view that doesn't is the parent view to two of the other views that update just fine.
I've tried rebooting my machine. Checked in all the files and opened them fresh after a reboot.
View 3 Replies
View Related
Apr 8, 2013
I'm using project navigator and I want to use the intelligent title marks created by the Mode Space View drawing that is created when I use the Detail Boundary.
I have purchased a 5 hour block of support time on this and after 4 days they have not found a result for me and are looking to developers at this point.
My issue is this. I xref in the floor plan that I want to use to make some enlarged floor plan details out of. I have a custom high detail display configuration set for this view drawing. I use the detial boundary tool that adds the detail boundary and tag and then created my model space view with an intelligent titlemark that will then reflect the number and sheet when inserted into a sheet drawing.
The problem is trying to get this MSV to reflect what I see on the floor plan. As of now it just brings in a enlarged detail of the area but it's all the same color with no hatch detail.
I can change the result of what I get by selecting the “model space view” that I created and then going to properties and changing the “display controlled by” on the display tab of the properties of that object. If I change that to “Drawing default setting” then the result is set to whatever the drawing default settings are. It looks like the “default settings” for a 2D Section/Elevation object are “General” Display Representations.
how to get my custom “Bew_High Detail” display representation to be the default Display Representation of the “2D Section/Elevation” object then I think I would get my desired results.
View 1 Replies
View Related
Jan 31, 2012
In the drawing environment, is it possible to use the same file to show a client (example) option a or option b from the file? Meaning, can I create a separate side by side view in the idw using the same assembly file, but in different suppressed states? Or how does this work specifically? Right now all I have done is saved out the file with the different suppressed state showing, but this became obviously cumbersome quickly since the parts are similar and keep updating, thus forcing me to create yet even more optional files. I'm thinking that iLogic could be a possible fix.
View 1 Replies
View Related
Apr 2, 2013
Is there any way to show my detail views in my elevations?
In autocad we use a little line with the detail number, but I can't find anything like that in revit. I've attached an example.
View 2 Replies
View Related
Nov 29, 2012
I had created som drawing before I had to make som adjustments to my model which made it a deal larger. Then i went back to my drawings. Everything was perfect exept my arrangement drawing where I have used the master wiew from my model to make a drawing. When i returnd, this was locked. I'v deleted the wiews in the dwg file and I'v tried to make som new ones but the master wiew becomes invisible in the dwg sheet. Ewery other wiew works just fine exept this. I guess it's because it is a large file, but how can I fix it?
My computer has these specifications
Intel Xeon 2,40GHz
RAM 16GB
64bit
Nvidia Quadro 4000
View 7 Replies
View Related
Apr 20, 2012
Every time I try to create an ipart I get the error message of "failed to create desel table".
View 9 Replies
View Related
Oct 14, 2013
When i trying to create a new ilogic rule i get window with this error:
Spoiler (Highlight to read)System.InvalidCastException: Невозможно выполнить приведение [A]iLogic.CodeSnippets к [B]iLogic.CodeSnippets. Источником типа A является "Autodesk.iLogic, Version=17.0.13800.0, Culture=neutral, PublicKeyToken=null" в контексте "Default" в расположении "C:PROGRA~1AutodeskINVENT~1BinAutodesk.iLogic.dll". Источником типа B является "Autodesk.iLogic, Version=17.0.13800.0, Culture=neutral, PublicKeyToken=null" в контексте "LoadFrom" в расположении
[code]..........
View 4 Replies
View Related
Feb 22, 2013
I have a subroutine which creates a WorkPoint with respect to some adjacent components in an assembly. As it happens, this subroutine is called twice; once for each of two different instances of a class. The particular snippet within the sub is:
Dim LowerYPt As WorkPoint = Nothing
Try
LowerYPt = AssyCompDef.WorkPoints.AddFixed(TG.CreatePoint(thisX, thisY, thisZ))
Catch ex As Exception
MsgBox(ex.ToString)
End Try
At least one of the X, Y and Z values are different for the two passes.On the first pass, it runs fine. On the second pass, I get a runtime error:
“System.Runtime.InteropServices.COMException (0x80004005): Unspecified error (Exception from HRESULT: 0x80004005 (E_FAIL)) at System.RuntimeType……….”
View 3 Replies
View Related
Sep 19, 2011
we've made a part from an assembly and put the stress analysis to the test. Unfortunately the analysis doesn't complete it's run, because of an error:
"An error occurred while creating the finite element mesh. The cause may be invalid geometry or features that are extremely small in comparison to the overall dimensions of the part. To fix the problem, please suppress those problematic features or use standard meshing method."
We can't change the thickness of the sheet-metal, because it's a model which comes from a supplier with a different cad-program. And supressing any features isn't possible, because it's a base-solid.
But where can we change it to the standard meshing methode? The program is recently re-installed on my computer, the settings haven't changed since it's been installed. We can't find the feature.
View 2 Replies
View Related
Jan 10, 2014
If it is possible to create a sectional view from my model and place that section in a new viewport without changing my other viewports. I have several viewports in my drawing but I need a certain detail section of the model but I do not want any of my viewports to get affected.
I can not have anything added to my model, since later on I will be using this drawing as a xref and I only want the main model to be carried over and not a section detail.
View 3 Replies
View Related
Jun 9, 2013
Every time I try to create multiple section views in Civil 3D 2014 the system hangs and never generates the views. It looks as if it's processing but it never stops and never generates.
View 4 Replies
View Related
Mar 3, 2012
Sometimes when i creating multiple views (sections) in section display option page there are nothing displaying.(surfaces).
View 2 Replies
View Related
Sep 2, 2013
Every time I create the sheets C3D ask me to create a profile view ?
But ... I already have it ....
Does C3D ask always for a new one ?
View 8 Replies
View Related
Mar 2, 2003
well i have been trying to get this to turn out but cannot.
i have used the search quite a few time today but no luck.
i need an outline of a fire, i dont need color or much detail.
View 1 Replies
View Related
Jun 15, 2012
I'm uploading the .dwg and .txt files. I'm trying to get volume calcs cut and fill between two surfaces and when I compare the data between AGTEK's Highway 3D there is different results. I looked into it to find these random line appearing in Autocad making what seems to be the problem. Where are these coming from and how do I fix? Also, if you could anwser how can I insert a sectional following the 12'-23' offsets and dropping 1.16' down and adding it to my design surface. I want to make a big box there added to design surface.
View 1 Replies
View Related
Mar 12, 2013
When creating cross section views ("Home>Section Views>Create Multiple Views"), my sections are being placed at the exact boundary of the viewport (viewport is per my template).
Surely there's a way to create a margin inside the viewport.
Here's a screen shot of what I'm seeing. Notice how the dotted "Plot Area Boundary line is going right thru the left axis labels and on top of the bottom axis blue line (which means the bottom axis labels will NOT be seen).
View 8 Replies
View Related
Aug 15, 2013
I was curious if there was an option to set up what linked view would be set when creating and duplicating views. Its a little time staking when you have 6-7 linked files and need to make 20-30 elevations/sections. I was thinking there would be a way to setup the views so they're ready to go when you create them.
View 2 Replies
View Related
Jan 8, 2014
I started a new project. I linked a revit file. I copy monitored key levels from the linked file. The color of the level heads is black and this indicates that there are no associated plan views. My question is, what is the best way to create plan views from the copy monitored levels?
View 1 Replies
View Related
May 21, 2012
When i am creating section sheets from multiple section views ,section sheet view port scale changes.I did set it correctly in my template.
For example it changs from 1:150 to 1:150_1
Then in section sheets scetions views are not displaying correctly.
When i change view port scale manually it shows correctly.But it should do to all sheets.
What should I do?
In model spacr multiple section views are showing correctly.
AutoCAD Civil 3D 2012 SP 2
Sri Lanka
View 8 Replies
View Related
Apr 3, 2013
I am trying to create a second base view (using Layout/Create View/Base from model space). The problem is, I need it to be rotated from the original base view. However, when I rotate the part in model space, ALL of my views change.
So I guess my question is, how do I create multiple views of the same part that are seperate from the other base views?
View 9 Replies
View Related
Aug 29, 2013
i have views lets say 3 views on a sheet but in the list of views theres mores that appears maybe i inserted the extra views that are showing but i deleted them to put them on another sheet
the problem is they show up in the list of both sheet and i can't delete them from the list of the sheet that they were before
View 1 Replies
View Related
Nov 30, 2011
How do I turn this circle off?
View 6 Replies
View Related
