AutoCAD Inventor :: Using View Reps For Detail Views In IDW
Oct 23, 2012
I've had this issue now for quite a while. Seems to only happen with wires that are made in the Cable & Harness module. And the odd part is that not all wires do this and not all View Rep/Detail views do this.
Regardless of wether I have a wire visible or not in a locked View Rep it still shows up in the Detail View on the .idw. And yes, I have the 'associative' check box checked.
I've unchecked the check box, nothing. Rechecked the box, nothing. Updated the views individually, nothing.
View 3 Replies
ADVERTISEMENT
May 20, 2013
Can I have an assembly cut and make a couple of view reps or level of details so that one has the assembly cut and one does not.
View 5 Replies
View Related
Dec 19, 2012
ILogic code ,I have had some code done to isolate selected parts in a assembly file that has a specific custom property filled in i.e. : DESC2.It then creates view reps and locks down giving the rep name the same name as part.
What I am after is some code that will place these isolated view reps as views on my dwg that the assembly resides in.With the functionality of picking face to show plan view of parts.
View 3 Replies
View Related
Nov 27, 2012
I have a assembly with several locked design view reps.
I insert a couple of new parts to assembly.
Now, do i have to manually unlock each of the design reps to have these new parts visible in the each of then design view reps?
If yes, any macro or ilogic tool to do this?
C1
Inventor Professional 2013
Vault Collaboration 2013
View 4 Replies
View Related
Jul 10, 2012
When placing or creating a new part in an assembly it is visible in every view rep which is a huge pain the proverbial.
Is there a setting to tell Inventor to only make newly inserted/created parts visible in the active view rep.
I am so tired of having to go through all my view reps every time I add a new part to an assembly.
View 4 Replies
View Related
Jun 8, 2012
I have a part in which one of the folds needs to be done at assembly and not during manufacturing of the other bends.
Is there a way I can show this so that the manufacturing print sees exactly what they need to do and nothing more but then on the unit assembly the assemblers see that the unfolded tab needs to be folded down?
Can this be done all in one part file?
View 4 Replies
View Related
Jul 1, 2012
Is it possible to copy a section view or detail view from one sheet to another, without having to copy the base view?
If so how?
If not, why?
View 1 Replies
View Related
Mar 26, 2013
im trying to make an template we can use as default template..
now when i make a section view or a detail view of a part, the annotation is placed above the section view..
I would like to have that underneath the view.
I know can drag it down there, but is there a way to have the annotation underneath the view when its created? would save me and the rest who is going to use the template a lot of time..
View 2 Replies
View Related
Nov 6, 2013
When i set a specific Plane in my new Level of Detail (Right click on the box set this view as "top") and save, i switch back to master and now the view from the new level of detail transferred over.
How can i make custom top,front,right niews for my new level of detail so it wont affect other details (especially my master view).
View 8 Replies
View Related
Jun 26, 2012
We have a conveyor belt profile, which covers a length of 2330 meters and a height of 150 meters. We have a place a elevation view of the profile in an idw file at a scale of 1:2500.
We would normal place detail views on the elevation view to zoom in on key areas of the belt, i.e. drive area etc. In all previous release of inventor had no problem. However Inventor 2013 displays the following error.
****************************************************************************************************************************************
Create Profile and Section View: Problems encountered while executing this command.
The specific inputs did not create sweep geometry (faces and.or edges). Try by changing path geometry and/or create the profile on a sketch plane that is perpendicular to the path and contains one of the path vertices.
****************************************************************************************************************************************
I have attached the part file and also the idw file that we are using.
View 6 Replies
View Related
Jun 6, 2012
Working with Inventor 2012: I have a rather large assembly (over 3000 parts) that was worked on by an outside engineering firm and includes several different Levels of Detail & Views under Representations. When they originally Pack 'n Go-ed the whole assembly and related .idw's over to us, all the .idw's seemed to show every view correctly without errors.
However, I've now went into the assembly and made several modifications to the overall master assembly and a few sub-assemblies within it (adding/deleting a few parts, nothing major). Now when I try to open a few of the master assembly .idw files, all the section & detail views have become full model views, losing their "cutaway" views. See the attached before & after pictures.
I've went back in to each .iam and made sure that the level's of detail & Views match the way the file was originally given to us but I can't seem to get the cutaway views back again.
View 9 Replies
View Related
Jul 9, 2012
Is there a way to customize the fence labels for detail and section views?
I know we can edit the label directly and add/remove text, but is there way to change the appearance of the label as well, with say a sketched symbol or other graphical representation like a balloon or other customized image?
View 4 Replies
View Related
Apr 26, 2012
I've created a drawing and when I create a detail view, the actual view appears in the drawing but the circle and arrows along with the view identifier are not showing up. It's like the visibility has been turn off. how to turn it back on?
Inventor 2013
Windows 7 Professional 64-bit SP1
HP EliteBook 8470w
Processor: Intel(R) Core(TM) i7-3610QM CPU @ 2.30GHz
Memory: 16 GB
AMD FirePro M2000
3D Connexion SpacePilot
View 1 Replies
View Related
Oct 3, 2013
Sometimes when I try to create a detail view of an isometric view in my IDW, the "detail full boundary" option is greyed out? Why would this be? If I try an ortho view it works fine.
View 5 Replies
View Related
Dec 13, 2011
I have a detail view of a groove on a cylinder. I want to dimension a diameter in which I only see one side, the other side is not in the detail view.
From some posts I see that I should auto insert a centerline then dimension from centerline then choose options "dimension linear".
First when I try to auto insert centerlines it does not insert the centerline for me. Perhaps because my detail is smaller. If I make the field for the detail view larger it makes a centerline, but I dont want to do that. I have tried making a sketch of the other side and the centerline. When I dimension from here I do not have the right click option of dimension linear, instead only arrowhead options.
Using Inventor Professional 2012
View 1 Replies
View Related
Oct 3, 2013
is it possible to create a detail view of an Iso view which is created with perspective camera? I tried it but it does not seem to let you have the option of selecting the connection line or detail view boundary?
View 5 Replies
View Related
Jul 15, 2013
Lets say I have 2 page drawing set of a damper, page 1 contains the main views and all the related part number ballons.
Page 2 contains fabrication details for the parts, brackets, blades etc.
For the parts I just inserted those into the drawing from their respective part file, allowing me to create the necessary amount of views to capture the needed dimensions for the shop.
When I go to apply a balloon to that part it wants to make it part #1 when it may be part # 7 of the assembly.
Inventor 2014
Windows 7 Pro SP1
Intel(R) Core(TM) i7-3770k CPU @ 3.50GHz
16GB RAM
NVIDIA Quadro 4000
3D Connexion SpaceMouse Pro
View 8 Replies
View Related
Nov 30, 2011
How do I turn this circle off?
View 6 Replies
View Related
Sep 12, 2012
Is there a property or method that can control the location of the name for a detail view? For example the picture below. Detail "B" represents the api default. Detail "C" representes where I want to put the text. All the properties, aside from "Name" apparently deal with the detail view itself.
View 1 Replies
View Related
Dec 11, 2013
I have a flat pattern with ordinate set dimension, taken detail from one end.
parent view having ordinate dimension from left end and i have taken detail view of right end.
i need detail view dimension with same origin dimension as like parent view.
View 3 Replies
View Related
May 14, 2010
How can I move a detail view to another sheet in a drawing in 2009? I have only been able to copy the detail and it's parent view to the 2nd sheet and then suppress the parent view on the 2nd sheet so that only the detail view is visible.
However, when I go back to the first sheet and try to suppress or delete the detail view, it also deletes / suppresses the detail circle from the parent view.
View 5 Replies
View Related
Apr 19, 2012
I know I'v done this before but I'm having trouble getting a detail view to just show the jagged cut lines where it crosses the part only & not all the way around it. See images attached to show the problem.
Inventor Suite 2013 Ultimate
View 8 Replies
View Related
Jan 30, 2013
While creating a drawing yesterday, I noticed that the RMB Options to modify a detail view has disappeared?
- Cutout Shape
- Detail Boundry
- Connecting line
I am not sure how long this has been like this, What I do know is that I had a corrupt model, (Broke when it migrated to 2013) I restored from backup and tested the model in ver 2012.
I can not say if bouncing between the two versions of inventor has perhaps changed something, or of this option has not been available for a while?
Autodesk Product Design Suite Premium 2014 SP1 Build 222
Intel Core i7 (950@3.07GHz)
Windows 7x64 (Home) - 12GB Ram
Nvidia GeForce GTX 560 Ti (1Gig - Ver:331.65)
View 1 Replies
View Related
Nov 6, 2012
How does one remove the boundary box for a detail view? I don't want it sitting in my main view, as this is a conveyor and it's very obvious at to where the drive arrangement is sited. See attached.
I'm guessing changing it to another layer that does not print is one option, or?
View 3 Replies
View Related
Mar 10, 2010
I've created a view in my presentation file and tweaked all my components to where I want them. How do I change the level of detail associated with a particular explosion already created? I know when you create the view you can select which representation and level of detail to use, but how do you change these after the exploded view is created?
View 6 Replies
View Related
Oct 23, 2013
How to use ellipse as boundary for detail view? I can only see rectangles and circles as my choices.
View 4 Replies
View Related
Aug 1, 2012
Is there a way so that in the window Detail View,
I will permenantly get a
Fenche Shape: rounded
cutout Shape: Rounded
Disyplay full Detail Boudary: at on
Display connection line: at on
Unless, I have to change them each time...
View 1 Replies
View Related
Feb 24, 2012
In my assembly drawing I have been able to add random dimensions anywhere I needed them.
Except for the detail view. How come I can select the two end points for my dimension, but it wont let me place it?
(Colossians 3:23-25)
View 4 Replies
View Related
Aug 22, 2012
I have a blown out detail on one of my Inventor drawings, I would like to toggle the visibility of some parts in this detail view however when I RHMB these under the browser I can't turn off the visibility
Autodesk Inventor Professional 2013 SP2 64-Bit Edition
Windows 7 HP Z400, Intel Xeon W3550 3.07GHz
12.0GB RAM, ATI FirePro V4800 (FireGL)
View 2 Replies
View Related
Jan 5, 2012
It seems that Views are easier to use, are there any benefits of View option over Level of Detail and vice versa?
View 3 Replies
View Related
Jul 8, 2013
I can find a method to copy a Design View to a Level of Detatil (DesignViewRepresentation.CopyToLevelOfDetail)
But the opposite way (i.e. LevelOfDetailRepresentation.CopyToDesignView) doesn't seem to exist - it is possible in the GUI.
Will I have to traverse the complete structure and set visibillity one by one to obtain the function then? Or are there a better/faster way to go?
View 3 Replies
View Related
