I can find a method to copy a Design View to a Level of Detatil (DesignViewRepresentation.CopyToLevelOfDetail)
But the opposite way (i.e. LevelOfDetailRepresentation.CopyToDesignView) doesn't seem to exist - it is possible in the GUI.
Will I have to traverse the complete structure and set visibillity one by one to obtain the function then? Or are there a better/faster way to go?
I've created a view in my presentation file and tweaked all my components to where I want them. How do I change the level of detail associated with a particular explosion already created? I know when you create the view you can select which representation and level of detail to use, but how do you change these after the exploded view is created?
View 6 Replies View RelatedCan I have an assembly cut and make a couple of view reps or level of details so that one has the assembly cut and one does not.
View 5 Replies View RelatedIt seems that Views are easier to use, are there any benefits of View option over Level of Detail and vice versa?
View 3 Replies View RelatedHow can I turn it off permanently? Or change the default to off? It's always on when I open my drawings.
I save the files with it off, but when I reopen, it's still on. A real pain in the butt when plotting since if I batch plot, all of my contours are off, which eliminates using batch plot entirely. Luckily, I only have 5 figures at the moment, but once we get to design phase I will have many more and require batch plotting.
I'm using civil3d 2013, I have never run into this before with any other versions.
Is it possible to set a view representation and level of detail (combine them) at the same time in an assembly. Or do they have to be set individually?
Attached images show the first assembly option with four sections together. The second image shows the second assembly option with the top and bottom sections only.
Is there a way to disable the level of detail? I personally find this feature most annoying.
I am now starting to understand it after being tripped up by it early in my Inventor carrier.
But even now in understanding it more, I see no point in it.
The problem I have is I can have more then one level of detail in my model to show a specific way in my
one drawing. Then this specific level of detail when changed for a different drawing will screw with the first drawing.
Why can't one just suppress certain items without having to worry about this. Heck, isn't this what Iparts and iassemblies are for?
anyway to get the level of detail into text in an idw?
View 2 Replies View RelatedWe are starting using the level of detail functionality and I am really missing the opportunity to lock this LOD the same way as I can with a Representation view.. Is there any way to do this ??
View 4 Replies View RelatedI am creating a large assembly that will contain many level of details. When I complete a "section" of components, I create a LOD for just that section (all other components suppressed). However, all the components I add after that LOD has been created are added to that LOD. I would like all additional components to be automatically suppressed, unless I have that LOD active.
Inventor 2013 Product Design Suite
Vault Professional 2013
Windows7 x64
I have an assembly and using ilogic to control the wide of the machine.The wider machine has some different brackets which I am turning on and off by using "component . IsActive" in ilogic.
I had to make a new level of detail for it to work, and this is all fine except everytime I open this assembly it defaults back to master level of detail, so I always get this error.
How do I control level of detail with ilogic or how am i suppose to turn parts on and off.I have seen some impressive assemblies controlled with ilogic how do they do it.
I know there's the setting in the Tools/Application Options/File dialogue that allows you to set a system wide setting of which LOD that opens each time you activate an assembly.
But what about a file specific setting where you are able to set a specific LOD that always opens for that specific assembly file? Or will that conflict with the system wide settings?
Granted, I know Inventor will open the last saved LOD (based on that system wide setting), but my client has users that, for a lack of better terms, are not paying attention or being aware of what LOD they are opening and thus editing the wrong LOD, etc.
When i set a specific Plane in my new Level of Detail (Right click on the box set this view as "top") and save, i switch back to master and now the view from the new level of detail transferred over.
How can i make custom top,front,right niews for my new level of detail so it wont affect other details (especially my master view).
I am running Inventor 2014. How I can sort or re-arrange the list of level of details? I added a new level of detail and it is at the bottom of the list in the browser. I would like to move it up near the top of the list so that similar levels of detail are grouped together.
View 1 Replies View RelatedI'd like to drive a parameter depending on the level of detail being shown. How can find which LOD is active within ilogic?
I'll use this for driving a weldment : when the weld is on the bead parameter = 6 when the weld is off the bead parameter = 0.1
In inv2012 is it possible to sort the level of detail list in an assembly? Or can I move a selected level up or down in a list?
View 8 Replies View RelatedFirst, is there a way to add a new part to an assembly and it only be added to the active Level of Detail (and the Master, of course)? It is adding a significant source of potential error when adding a part to an assembly when you have to make sure to go back and change the status of a newly added part in each Level of Detail.
Secondly, is there a better solution than using Levels of Detail in the first place? We typically have assemblies that are in a few stages: 1) an empty shell 2) shell with ballast 3) shell with ballast and fill material. I have started using Levels of Detail to suppress components at each of those 3 stages because it is important that we have accurate weights for each stage. Our assemblies are not terribly large so memory usage is not really a problem, and I have read on Levels of Detail it is usually useful in a memory management situation.
Lastly, is there any good reason to not be able to save a Level of Detail when there is a positional representation active?
Inventor 2013 (SP2 Update 2), Windows 7 Professional (64-bit), SP1, Intel Xeon 3.07GHz CPU, 12GB RAM, NVIDIA Quadro 2000, Vault Basic 2013
I'm trying to use the Level of Detail function to add a hole feature in a sub assembly that will be used in 2 places inside the main assembly, but the sub assembly is present in many other location and does not need this hole. My thought is to have the master level of detail depict the hole feature and have another level of detail with this hole suppressed.I can't get the two levels of detail to save the desired outcome. When I switch LODs, the hole feature will not suppress or unsuppress as desired. Is this possible or am I doing something wrong.
View 3 Replies View RelatedIf Inventor 2010 has the capability of showing certain parts/sub-assemblies in phantom style lines on the idw/dwg file?
I have a box unit, where I want to show the base, but with the posts meeting it in phantom. Then when I do the drawing for the posts, I want the base and roof in phantom. Then when I do the roof drawing, I want the posts in phantom again.
I can't change the BOM level as it will apply to every level of detail. when suppressed, they completely vanish. Is there a way to do it rather than find the parts in the browser (whilst in the drawing) and change the properties (over-riding them)?
How can i use a level of detail from sub assembly in the main assembly?
View 2 Replies View RelatedWhen holes are put in at the assembly level by using the 2d sketch command, projecting geometry and then using the hole command in the Model tab works great. Is there a way to transfer the holes put in at the assembly level to the detail drawings (ipt)?
View 4 Replies View RelatedI've created a drawing and when I create a detail view, the actual view appears in the drawing but the circle and arrows along with the view identifier are not showing up. It's like the visibility has been turn off. how to turn it back on?
Inventor 2013
Windows 7 Professional 64-bit SP1
HP EliteBook 8470w
Processor: Intel(R) Core(TM) i7-3610QM CPU @ 2.30GHz
Memory: 16 GB
AMD FirePro M2000
3D Connexion SpacePilot
Sometimes when I try to create a detail view of an isometric view in my IDW, the "detail full boundary" option is greyed out? Why would this be? If I try an ortho view it works fine.
View 5 Replies View RelatedI have a detail view of a groove on a cylinder. I want to dimension a diameter in which I only see one side, the other side is not in the detail view.
From some posts I see that I should auto insert a centerline then dimension from centerline then choose options "dimension linear".
First when I try to auto insert centerlines it does not insert the centerline for me. Perhaps because my detail is smaller. If I make the field for the detail view larger it makes a centerline, but I dont want to do that. I have tried making a sketch of the other side and the centerline. When I dimension from here I do not have the right click option of dimension linear, instead only arrowhead options.
Using Inventor Professional 2012
is it possible to create a detail view of an Iso view which is created with perspective camera? I tried it but it does not seem to let you have the option of selecting the connection line or detail view boundary?
View 5 Replies View RelatedI am trying to make an assembly copy as separate project using the iLogic Design Copy feature.
Everything seems fine except I do not have my involved in assemblyContet Centerparts in this copy.
I am also have no any possibility to chose the Content Center folder in the iLogic Design Copy feature as it does not showup there.
[URL]
After upgrading to Inventor 2014 we notice that the graphics do not work properly, and that the overall performance in drawings and modelling bad compared to 2013. Then we installed SP1 and now drawing views are disappearing, however when we select "shaded" view the view reappears and works perfectly..
Any workaround regarding disappearing views?
How do I turn this circle off?
View 6 Replies View RelatedIs there a property or method that can control the location of the name for a detail view? For example the picture below. Detail "B" represents the api default. Detail "C" representes where I want to put the text. All the properties, aside from "Name" apparently deal with the detail view itself.
View 1 Replies View RelatedI have a flat pattern with ordinate set dimension, taken detail from one end.
parent view having ordinate dimension from left end and i have taken detail view of right end.
i need detail view dimension with same origin dimension as like parent view.
How can I move a detail view to another sheet in a drawing in 2009? I have only been able to copy the detail and it's parent view to the 2nd sheet and then suppress the parent view on the 2nd sheet so that only the detail view is visible.
However, when I go back to the first sheet and try to suppress or delete the detail view, it also deletes / suppresses the detail circle from the parent view.
