AutoCAD Civil 3D :: Turn Off Level Of Detail View
May 29, 2013
How can I turn it off permanently? Or change the default to off? It's always on when I open my drawings.
I save the files with it off, but when I reopen, it's still on. A real pain in the butt when plotting since if I batch plot, all of my contours are off, which eliminates using batch plot entirely. Luckily, I only have 5 figures at the moment, but once we get to design phase I will have many more and require batch plotting.
I'm using civil3d 2013, I have never run into this before with any other versions.
View 9 Replies
ADVERTISEMENT
Mar 10, 2010
I've created a view in my presentation file and tweaked all my components to where I want them. How do I change the level of detail associated with a particular explosion already created? I know when you create the view you can select which representation and level of detail to use, but how do you change these after the exploded view is created?
View 6 Replies
View Related
May 20, 2013
Can I have an assembly cut and make a couple of view reps or level of details so that one has the assembly cut and one does not.
View 5 Replies
View Related
Jan 5, 2012
It seems that Views are easier to use, are there any benefits of View option over Level of Detail and vice versa?
View 3 Replies
View Related
Jul 8, 2013
I can find a method to copy a Design View to a Level of Detatil (DesignViewRepresentation.CopyToLevelOfDetail)
But the opposite way (i.e. LevelOfDetailRepresentation.CopyToDesignView) doesn't seem to exist - it is possible in the GUI.
Will I have to traverse the complete structure and set visibillity one by one to obtain the function then? Or are there a better/faster way to go?
View 3 Replies
View Related
Mar 11, 2013
I dont see any way to do this, maybe it is not possible ?
Where can I see it settings ? (if possible)
View 9 Replies
View Related
Mar 8, 2013
In my profile view I have existing and proposed levels in m.
The level difference is also in m but I'd like it to be scaled to show mm, as this is quicker to read on site.
Is there some way to edit the equation and multiply by 1000?
View 6 Replies
View Related
Jan 26, 2012
Is it possible to set a view representation and level of detail (combine them) at the same time in an assembly. Or do they have to be set individually?
Attached images show the first assembly option with four sections together. The second image shows the second assembly option with the top and bottom sections only.
View 2 Replies
View Related
Mar 19, 2012
Is there a way to disable the level of detail? I personally find this feature most annoying.
I am now starting to understand it after being tripped up by it early in my Inventor carrier.
But even now in understanding it more, I see no point in it.
The problem I have is I can have more then one level of detail in my model to show a specific way in my
one drawing. Then this specific level of detail when changed for a different drawing will screw with the first drawing.
Why can't one just suppress certain items without having to worry about this. Heck, isn't this what Iparts and iassemblies are for?
View 9 Replies
View Related
Oct 27, 2011
anyway to get the level of detail into text in an idw?
View 2 Replies
View Related
Mar 19, 2007
We are starting using the level of detail functionality and I am really missing the opportunity to lock this LOD the same way as I can with a Representation view.. Is there any way to do this ??
View 4 Replies
View Related
Jul 9, 2008
I am creating a large assembly that will contain many level of details. When I complete a "section" of components, I create a LOD for just that section (all other components suppressed). However, all the components I add after that LOD has been created are added to that LOD. I would like all additional components to be automatically suppressed, unless I have that LOD active.
Inventor 2013 Product Design Suite
Vault Professional 2013
Windows7 x64
View 3 Replies
View Related
Jun 28, 2011
I have an assembly and using ilogic to control the wide of the machine.The wider machine has some different brackets which I am turning on and off by using "component . IsActive" in ilogic.
I had to make a new level of detail for it to work, and this is all fine except everytime I open this assembly it defaults back to master level of detail, so I always get this error.
How do I control level of detail with ilogic or how am i suppose to turn parts on and off.I have seen some impressive assemblies controlled with ilogic how do they do it.
View 9 Replies
View Related
Mar 28, 2012
I know there's the setting in the Tools/Application Options/File dialogue that allows you to set a system wide setting of which LOD that opens each time you activate an assembly.
But what about a file specific setting where you are able to set a specific LOD that always opens for that specific assembly file? Or will that conflict with the system wide settings?
Granted, I know Inventor will open the last saved LOD (based on that system wide setting), but my client has users that, for a lack of better terms, are not paying attention or being aware of what LOD they are opening and thus editing the wrong LOD, etc.
View 5 Replies
View Related
Nov 6, 2013
When i set a specific Plane in my new Level of Detail (Right click on the box set this view as "top") and save, i switch back to master and now the view from the new level of detail transferred over.
How can i make custom top,front,right niews for my new level of detail so it wont affect other details (especially my master view).
View 8 Replies
View Related
Aug 5, 2013
I am running Inventor 2014. How I can sort or re-arrange the list of level of details? I added a new level of detail and it is at the bottom of the list in the browser. I would like to move it up near the top of the list so that similar levels of detail are grouped together.
View 1 Replies
View Related
Sep 14, 2011
I'd like to drive a parameter depending on the level of detail being shown. How can find which LOD is active within ilogic?
I'll use this for driving a weldment : when the weld is on the bead parameter = 6 when the weld is off the bead parameter = 0.1
View 2 Replies
View Related
Jul 25, 2011
In inv2012 is it possible to sort the level of detail list in an assembly? Or can I move a selected level up or down in a list?
View 8 Replies
View Related
Mar 30, 2012
First, is there a way to add a new part to an assembly and it only be added to the active Level of Detail (and the Master, of course)? It is adding a significant source of potential error when adding a part to an assembly when you have to make sure to go back and change the status of a newly added part in each Level of Detail.
Secondly, is there a better solution than using Levels of Detail in the first place? We typically have assemblies that are in a few stages: 1) an empty shell 2) shell with ballast 3) shell with ballast and fill material. I have started using Levels of Detail to suppress components at each of those 3 stages because it is important that we have accurate weights for each stage. Our assemblies are not terribly large so memory usage is not really a problem, and I have read on Levels of Detail it is usually useful in a memory management situation.
Lastly, is there any good reason to not be able to save a Level of Detail when there is a positional representation active?
Inventor 2013 (SP2 Update 2), Windows 7 Professional (64-bit), SP1, Intel Xeon 3.07GHz CPU, 12GB RAM, NVIDIA Quadro 2000, Vault Basic 2013
View 6 Replies
View Related
Dec 13, 2011
I'm trying to use the Level of Detail function to add a hole feature in a sub assembly that will be used in 2 places inside the main assembly, but the sub assembly is present in many other location and does not need this hole. My thought is to have the master level of detail depict the hole feature and have another level of detail with this hole suppressed.I can't get the two levels of detail to save the desired outcome. When I switch LODs, the hole feature will not suppress or unsuppress as desired. Is this possible or am I doing something wrong.
View 3 Replies
View Related
May 31, 2012
If Inventor 2010 has the capability of showing certain parts/sub-assemblies in phantom style lines on the idw/dwg file?
I have a box unit, where I want to show the base, but with the posts meeting it in phantom. Then when I do the drawing for the posts, I want the base and roof in phantom. Then when I do the roof drawing, I want the posts in phantom again.
I can't change the BOM level as it will apply to every level of detail. when suppressed, they completely vanish. Is there a way to do it rather than find the parts in the browser (whilst in the drawing) and change the properties (over-riding them)?
View 9 Replies
View Related
Nov 19, 2012
How can i use a level of detail from sub assembly in the main assembly?
View 2 Replies
View Related
Jan 23, 2012
When holes are put in at the assembly level by using the 2d sketch command, projecting geometry and then using the hole command in the Model tab works great. Is there a way to transfer the holes put in at the assembly level to the detail drawings (ipt)?
View 4 Replies
View Related
Apr 26, 2012
I've created a drawing and when I create a detail view, the actual view appears in the drawing but the circle and arrows along with the view identifier are not showing up. It's like the visibility has been turn off. how to turn it back on?
Inventor 2013
Windows 7 Professional 64-bit SP1
HP EliteBook 8470w
Processor: Intel(R) Core(TM) i7-3610QM CPU @ 2.30GHz
Memory: 16 GB
AMD FirePro M2000
3D Connexion SpacePilot
View 1 Replies
View Related
Oct 3, 2013
Sometimes when I try to create a detail view of an isometric view in my IDW, the "detail full boundary" option is greyed out? Why would this be? If I try an ortho view it works fine.
View 5 Replies
View Related
Dec 13, 2011
I have a detail view of a groove on a cylinder. I want to dimension a diameter in which I only see one side, the other side is not in the detail view.
From some posts I see that I should auto insert a centerline then dimension from centerline then choose options "dimension linear".
First when I try to auto insert centerlines it does not insert the centerline for me. Perhaps because my detail is smaller. If I make the field for the detail view larger it makes a centerline, but I dont want to do that. I have tried making a sketch of the other side and the centerline. When I dimension from here I do not have the right click option of dimension linear, instead only arrowhead options.
Using Inventor Professional 2012
View 1 Replies
View Related
Aug 11, 2011
Is it possible to show the exterior walls at a different detail level than the interior walls in the same view? Keep in mind they are all apart of the basic wall system family so there is no editing the family visibility at this point.
View 1 Replies
View Related
Mar 10, 2013
Revit 2013: Was playing around with sketching symbolic lines in a Generic Model family. I added a line and changed its LOD to be visible in fine only. Nevertheless, it was still visible in the family editor even when the view was set to coarse.
1) How can we verify visual behavior of a family while in the family editor if the objects visibility is not governed by LOD settings? (BTW: The family performs correctly when loaded in the project, just not in the family editor).
2) Is the fact that LOD is ignored in the family editor by design or a bug?
3) Is there any visual cue that tells us that a particular line will be not visible at a LOD?
4) Should we be duplicating Ref. Level views in the family to keep things straight?
View 7 Replies
View Related
Oct 3, 2013
is it possible to create a detail view of an Iso view which is created with perspective camera? I tried it but it does not seem to let you have the option of selecting the connection line or detail view boundary?
View 5 Replies
View Related
Jun 26, 2012
I would like to highlight connector cutout details on a panel using the circular detail feature.
The views created are fine, however the detail indicator, the circle with arrows and identifier clutter the face of the object. If i could turn them off i would then use a leader to point to the detail instead, which in my case will be much neater.
View 2 Replies
View Related
Oct 5, 2011
I have a single plan referenced in twice (one mirrored from the other) as this is a duplex. I need to turn a level on in one Plan that I do not wish to be on in the other Plan.
View 9 Replies
View Related
