Sometimes when I try to create a detail view of an isometric view in my IDW, the "detail full boundary" option is greyed out? Why would this be? If I try an ortho view it works fine.
View 5 Replies
I wanted to create an isometric text in isometric view to indicate different names in different part.
Attached is the picture for reference.I did it using dimension, check the "hide dimension" option.But i can't hide the extension line.
how to create an isometric text?
is it possible to create a detail view of an Iso view which is created with perspective camera? I tried it but it does not seem to let you have the option of selecting the connection line or detail view boundary?
View 5 Replies View RelatedI started with a Left side view of a part and created a sectioned view right down the middle so you can see the insides from another view. the part is pretty big so i used a Break to shorten it to fit the page. I also placed a smaller and separate isometric view of the same part and want this view to inherit the same break. How can I do this? If I go into the display options of the iso view, all the cut inheritance options are grayed out and can't be clicked. I've seen this done before, but i'm sure i missed a step somewhere.
Inventor Professional 2013
Intel Xeon W3680 @ 3.33Ghz
12GB DDR3 RAM
NVIDIA Quadro 2000 GPU
Windows 7 Professinal 64-bit
I have a long shaft with parts mounted on. i want to section it and show the parts. i don't need to show the whole length of the shaft.
I know i can crop the isometric view, but this way i will not see the key hole which is on the other side, it's hidden.
If i make a section it 's in an orthogonal view only.
I want to make the section view, but later to transform the sectioned view to an isometry. is it possible?
I've created a drawing and when I create a detail view, the actual view appears in the drawing but the circle and arrows along with the view identifier are not showing up. It's like the visibility has been turn off. how to turn it back on?
Inventor 2013
Windows 7 Professional 64-bit SP1
HP EliteBook 8470w
Processor: Intel(R) Core(TM) i7-3610QM CPU @ 2.30GHz
Memory: 16 GB
AMD FirePro M2000
3D Connexion SpacePilot
I have a detail view of a groove on a cylinder. I want to dimension a diameter in which I only see one side, the other side is not in the detail view.
From some posts I see that I should auto insert a centerline then dimension from centerline then choose options "dimension linear".
First when I try to auto insert centerlines it does not insert the centerline for me. Perhaps because my detail is smaller. If I make the field for the detail view larger it makes a centerline, but I dont want to do that. I have tried making a sketch of the other side and the centerline. When I dimension from here I do not have the right click option of dimension linear, instead only arrowhead options.
Using Inventor Professional 2012
I need to create detail views in a 2d layout drawing. What I mean is that a 'zoomed' view inside a "circle". The view magnifies the specific part of a drawing, but the dimension value keep the same. What command should I use?
View 9 Replies View RelatedIs there a way to turn off automatic isometric view when returning to the model from a sketch view (in 2012)?
View 5 Replies View RelatedIs it possible to creat Single Line Isometric from the Piping Model?
View 4 Replies View RelatedIs it possible to know if the assembly view is isometric view or not.I need to perform check to get this value.
View 9 Replies View RelatedI use: oView.scale=oView.scale/2 to half each view scale. It works for base view, projected views like bottom view and left view, but it doesn't work for Isometric view. Which property should I use for Isometric view?
View 6 Replies View RelatedI'm wondering is it possible to orientate the dimension text alligned to paper(2.jpg) but not the UCS of Isometric drawing(1.jpg).
Sometime I need to allocate my drawing with dimensioning in isometric view because its more easy to read.
I'm placing my drawing in *.idw.
Sometimes when I'm exiting from a sketch, the entire model goes back to isometric view. Is there a way to STOP this from happening?
View 9 Replies View RelatedTrying to dimension a shaft in isometric view with various diameters. I am unable to find or select the centerpoints at the ends of the shaft. This causes dimensions to be crooked. How can i get the centerpoints to display so that they may be selected?
View 9 Replies View RelatedHow do I turn this circle off?
View 6 Replies View RelatedIs there a property or method that can control the location of the name for a detail view? For example the picture below. Detail "B" represents the api default. Detail "C" representes where I want to put the text. All the properties, aside from "Name" apparently deal with the detail view itself.
View 1 Replies View RelatedI have a flat pattern with ordinate set dimension, taken detail from one end.
parent view having ordinate dimension from left end and i have taken detail view of right end.
i need detail view dimension with same origin dimension as like parent view.
How can I move a detail view to another sheet in a drawing in 2009? I have only been able to copy the detail and it's parent view to the 2nd sheet and then suppress the parent view on the 2nd sheet so that only the detail view is visible.
However, when I go back to the first sheet and try to suppress or delete the detail view, it also deletes / suppresses the detail circle from the parent view.
I know I'v done this before but I'm having trouble getting a detail view to just show the jagged cut lines where it crosses the part only & not all the way around it. See images attached to show the problem.
Inventor Suite 2013 Ultimate
While creating a drawing yesterday, I noticed that the RMB Options to modify a detail view has disappeared?
- Cutout Shape
- Detail Boundry
- Connecting line
I am not sure how long this has been like this, What I do know is that I had a corrupt model, (Broke when it migrated to 2013) I restored from backup and tested the model in ver 2012.
I can not say if bouncing between the two versions of inventor has perhaps changed something, or of this option has not been available for a while?
Autodesk Product Design Suite Premium 2014 SP1 Build 222
Intel Core i7 (950@3.07GHz)
Windows 7x64 (Home) - 12GB Ram
Nvidia GeForce GTX 560 Ti (1Gig - Ver:331.65)
How does one remove the boundary box for a detail view? I don't want it sitting in my main view, as this is a conveyor and it's very obvious at to where the drive arrangement is sited. See attached.
I'm guessing changing it to another layer that does not print is one option, or?
I've created a view in my presentation file and tweaked all my components to where I want them. How do I change the level of detail associated with a particular explosion already created? I know when you create the view you can select which representation and level of detail to use, but how do you change these after the exploded view is created?
View 6 Replies View RelatedHow to use ellipse as boundary for detail view? I can only see rectangles and circles as my choices.
View 4 Replies View RelatedIs there a way so that in the window Detail View,
I will permenantly get a
Fenche Shape: rounded
cutout Shape: Rounded
Disyplay full Detail Boudary: at on
Display connection line: at on
Unless, I have to change them each time...
In my assembly drawing I have been able to add random dimensions anywhere I needed them.
Except for the detail view. How come I can select the two end points for my dimension, but it wont let me place it?
(Colossians 3:23-25)
I've had this issue now for quite a while. Seems to only happen with wires that are made in the Cable & Harness module. And the odd part is that not all wires do this and not all View Rep/Detail views do this.
Regardless of wether I have a wire visible or not in a locked View Rep it still shows up in the Detail View on the .idw. And yes, I have the 'associative' check box checked.
I've unchecked the check box, nothing. Rechecked the box, nothing. Updated the views individually, nothing.
I have a blown out detail on one of my Inventor drawings, I would like to toggle the visibility of some parts in this detail view however when I RHMB these under the browser I can't turn off the visibility
Autodesk Inventor Professional 2013 SP2 64-Bit Edition
Windows 7 HP Z400, Intel Xeon W3550 3.07GHz
12.0GB RAM, ATI FirePro V4800 (FireGL)
Can I have an assembly cut and make a couple of view reps or level of details so that one has the assembly cut and one does not.
View 5 Replies View RelatedIt seems that Views are easier to use, are there any benefits of View option over Level of Detail and vice versa?
View 3 Replies View RelatedI can find a method to copy a Design View to a Level of Detatil (DesignViewRepresentation.CopyToLevelOfDetail)
But the opposite way (i.e. LevelOfDetailRepresentation.CopyToDesignView) doesn't seem to exist - it is possible in the GUI.
Will I have to traverse the complete structure and set visibillity one by one to obtain the function then? Or are there a better/faster way to go?
