AutoCAD Inventor :: Isometric View From Piping Model?
Apr 1, 2010Is it possible to creat Single Line Isometric from the Piping Model?
View 4 Replies
ADVERTISEMENT
AutoCAD Inventor :: Piping - Isometric Dimensions To Elbows
Sep 7, 2013I need a way to add isometric dimensions from the elbow below?
This is how standard piping isometric drawings are done, no need for a front view, top view, etc.
Just all dimensions on one isometric view.
I am creating piping drawings for a Power Station and want to dimension from the intersection of the centrelines of all the elbows on the pipe run (just like dimension 300 and 1282 in the picture below).
I've been able to add dim 300 & 1282 by using "Include Route Centerlines" BUT if there's piping created without a piping route this cannot be done.
I don't understand why I cannot get dimension A & B from the standard work features displayed on the elbow or dimension between two elbows just using these work features?
AutoCAD Inventor :: Create An Isometric Text In Isometric View
Jan 13, 2010I wanted to create an isometric text in isometric view to indicate different names in different part.
Attached is the picture for reference.I did it using dimension, check the "hide dimension" option.But i can't hide the extension line.
how to create an isometric text?
AutoCad :: Isometric Piping Drawings
May 14, 2013When I start an Iso drawing should I use the 3D Views under the View tab and set it to SW Isometric or should I use the Snap/Style/Isometric way? I like using the 3D views, but it doesnt set the drawing up the same. What is the accepted procedure.
View 7 Replies View RelatedAutoCAD Inventor :: How To Pass Break From Sectioned View To Separate Isometric View
Jun 27, 2012I started with a Left side view of a part and created a sectioned view right down the middle so you can see the insides from another view. the part is pretty big so i used a Break to shorten it to fit the page. I also placed a smaller and separate isometric view of the same part and want this view to inherit the same break. How can I do this? If I go into the display options of the iso view, all the cut inheritance options are grayed out and can't be clicked. I've seen this done before, but i'm sure i missed a step somewhere.
Inventor Professional 2013
Intel Xeon W3680 @ 3.33Ghz
12GB DDR3 RAM
NVIDIA Quadro 2000 GPU
Windows 7 Professinal 64-bit
AutoCAD Inventor :: Create Detail View Of Isometric View In IDW?
Oct 3, 2013Sometimes when I try to create a detail view of an isometric view in my IDW, the "detail full boundary" option is greyed out? Why would this be? If I try an ortho view it works fine.
View 5 Replies View RelatedAutoCAD Inventor :: How To Make Section View As Isometric View
Oct 29, 2013I have a long shaft with parts mounted on. i want to section it and show the parts. i don't need to show the whole length of the shaft.
I know i can crop the isometric view, but this way i will not see the key hole which is on the other side, it's hidden.
If i make a section it 's in an orthogonal view only.
I want to make the section view, but later to transform the sectioned view to an isometry. is it possible?
AutoCAD Inventor :: Getting Isometric Drawing From Pipe Model
Apr 9, 2012How can i create an isometric drawing from pipe model.
View 9 Replies View RelatedAutoCAD Inventor :: How To Turn Off Automatic Isometric View
Mar 19, 2012Is there a way to turn off automatic isometric view when returning to the model from a sketch view (in 2012)?
View 5 Replies View RelatedAutoCAD Inventor :: Assembly Current View - Isometric Or Not
Feb 14, 2013Is it possible to know if the assembly view is isometric view or not.I need to perform check to get this value.
View 9 Replies View RelatedAutoCAD Inventor :: Can't Change Scale Of Isometric View
Feb 18, 2013I use: oView.scale=oView.scale/2 to half each view scale. It works for base view, projected views like bottom view and left view, but it doesn't work for Isometric view. Which property should I use for Isometric view?
View 6 Replies View RelatedAutoCAD Inventor :: Dimensioning Isometric View (text Orientation)
Aug 3, 2012I'm wondering is it possible to orientate the dimension text alligned to paper(2.jpg) but not the UCS of Isometric drawing(1.jpg).
Sometime I need to allocate my drawing with dimensioning in isometric view because its more easy to read.
I'm placing my drawing in *.idw.
AutoCAD Inventor :: Isometric View When Exiting Sketch Mode
Aug 29, 2011Sometimes when I'm exiting from a sketch, the entire model goes back to isometric view. Is there a way to STOP this from happening?
View 9 Replies View RelatedAutoCAD Inventor :: Dimension Shaft In Isometric View With Various Diameters
Apr 9, 2012Trying to dimension a shaft in isometric view with various diameters. I am unable to find or select the centerpoints at the ends of the shaft. This causes dimensions to be crooked. How can i get the centerpoints to display so that they may be selected?
View 9 Replies View RelatedAutoCad 3D :: Create Solid Model Of Structures And Piping?
Mar 16, 2012Any program that can accept point clouds (which will be millions of points) from a 3D laser? Then we would like to create a solid model of the structures and piping.
View 5 Replies View RelatedAutoCad :: 3D Piping In Plan View
Feb 15, 2013Having issues plotting. I have a sheet with 3d piping in plan view, viewport is set to Legacy Hidden as always. I have a 3DCLIP plane set to only see pipe at a certain elevation. When plotted, some of the pipe lines are missing. If I change the viewport display view, then the piping is fine but random objects show up that shouldn't b/c of my 3DCLIP plane.
View 0 Replies View RelatedAutoCAD Inventor :: Remove Part Form Part In Isometric View?
Oct 23, 2013I order not to hide components, i want to make a break sketch and remove a piece from a part from an assembly in the isometric view in a drawing. can i do that?
View 4 Replies View RelatedAutoCAD Civil 3D :: Model Object Colour Changes After Switching From Layout View To Model View
Jun 14, 2012CIvil 3D 2013 / My drawing opens in layout view and all model objects are appropriately coloured by layer. If I hit plot at this point, my colour dependent .ctb file works fine. However, once I swtich to model view, all my linework turns white and if I switch back to Layout view it remains white and plots each line with the weight assigned to the colour white.
View 2 Replies View RelatedAutoCad :: How To Do Isometric And Top View In 2007
Feb 11, 2013im doing both isometric view and top view of a floor plan in a single paper at the same time.
the problem is ..when i change the view to isometric.. the drawing that is intended for top view changes to isometric view also..
how can i change the view of a single object to isometric isolatedly,, without affecting the other drawings and remain in its current position?
btw im using autocad 2007.
AutoCAD 2010 :: Plot As PDF Isometric View?
Mar 29, 2012I have been trying to plot as a PDF an isometric view from CAD. I am using CAP Studio for these 3D symbols and for some reason even though I have monchrome.ctb selected under Plot Style Table my PDF is printing in color, not all black.
View 9 Replies View RelatedAutoCAD 2010 :: Array In Isometric View?
Nov 13, 2012AUTOCAD 2012 - Is it possible to use the array feature in Isometric view?
View 4 Replies View RelatedAutoCad :: Generate Isometric View Of Drawing?
May 25, 2011My boss said i could generate an isometric view of a drawing if i have the plan, elevation, and side views (makes sense enough). how do i go about doing this? is there an existing thread i can be forwarded to? (searching "isometric" didn't seem specifically useful.)
View 9 Replies View RelatedAutoCAD Civil 3D :: 2012 - Freeze In Model Space Switching Between Isometric Views
Apr 27, 2012on a couple of my lager project i have recently had issues with Autodesk Civil 3D 2012 Freezing in Model Space switching between Isometric views. the number of view changes varies each time but seams to freeze during regen of the model.
I have checked the performace tuner and updated my driver, see Attached Log.
We are in the process of changing our CAD Stations over to Windows 7 64 bit, but im not scheduled for a couple more months.
System:
Dell Precision T3400
Windows XP SP3 32 bit
Intel Core2 Quad (Q9550 @ 2.53GHz)
4GB RAM
AutoCAD Architecture :: Perspective View Turns Isometric
Jun 21, 2011I have Autocad Architecture 2011 and it was working perfect until Yesterday. I Repair and then Reinstall but still the same problem.
When I have a Parellel (isometric) View and transfer to perspective works well but when I exit from the orbit function everything disappear and the cursor become crazy. I push pan and appears the drawing I release pan and the drawing disappear. The same problem in a viewport. I setup the perspective view on the viewport, lock the v-port, save and close the drawing, then open the same drawing and the perspective view become Isometric.
AutoCad :: How To Get Orthographic / Isometric View (with Some Dimensions) From Object
Apr 25, 2011i'm wondering how to get orthographic views isometric view (with some dimentions) from an object ive already assembled with proengineer (student).
View 1 Replies View RelatedAutoCad :: When To Add Dimensions To 3D Object In Isometric (or Similar) View
May 26, 2011When I add dimensions to an 3d object in an isometric (or similar) view, the dimension lines get placed way off screen, and the leader lines are projected onto the x-y plane.
Additionally, when I try to add lines to an object that is far from the x-y plane, the mouse position responds to the line's location as if it were drawing on the x-y plane.
Do I have to continually make custom UCS coordinates just to draw in 3d without hassle? There are other times when this does not happen (perhaps only when my 3d object is very near the x-y plane...
AutoCad :: Crosshair Disappear In Isometric View When Zoom In
Sep 21, 2010when i started using 2011. I have 2 viewports active; plan and isometric view. But when I try to navigate in the isometric view, the crosshair behaves in a way I don't understand. What happens is that when I zoom in the crosshair disappears over or under what I'm zooming in on.
It's hard to describe, but it seems that it have a different origo then the view represents. When I zoom out so much that the crosshairs are visible and I try to move them upwards, they stop in the middle of the screen and then the marker becomes visible in the ribbon part of the screen.
I have tried detaching all xref's, purged and audit, checked the elevation (0). This only happens in some drawings, not all, and I can't think of a common denominator in the drawings it happens.
AutoCAD VB :: How To Show 3D Solid Object Name On Isometric View
Apr 23, 2012I wrote a program that I can give a name automaticly for all 3d solid objects.
But I want to show a little box on isometric view every names with VBA codes.
How can I show 3D Solid object's name on isometric view?
I try to show on Attachment.
AutoCad 2D :: Cursor Doesn't Display In Isometric View
Jun 22, 2012When I switch from 2D top view to an isometric view my cursor disappears. This is a completely new drawing file so maybe something is not set right.
View 3 Replies View RelatedAutoCad :: 3D To 2D Isometric Look In Top View FLATTEN / FLATSHOT Commands?
Nov 16, 2013I have created an object in 3ds max and exported as dwg. file to open it in autocad. The purpose for importing that shape in autocad was to set an isometric view of that object and use it in my 2D drawings for annotation and explanation purposes.
What I am trying to achieve is to have that isometric view flattened, but in top (drafting) view along my plan section and elevations so that it looks as if it has been drafted in 2D if that makes sense.
So far I have come across two commands - FLATTEN and FLATSHOT. When using FLATTEN command I get the flattened 2d splines from that object as desired, but in that orthographic view. As soon as I start rotating the flat shape gets distorted and I cant get back to it's original flattened state.
FLATSHOT immediately comes with an error saying that it is not a solid so nothing can be projected. Explode the object then use command - converttosurface this works and I can initiate the FLATSHOT command but the shape has all this extra geometry after converting it to surface and it is not what I want.
The closest is the FLATTEN command as it also allows me to hide the back edges so that I only get a clean outline of the object. But how can I rotate it and position it in a top view, flat, along the drafted elevation and plan.
AutoCAD Architecture :: Printing Color In Isometric And Plan View
Oct 31, 2013From my project manager > views, I select a view, it opens in model. I change to paper space and have my plan and an isometric view (in wire frame). I go to view and select shaded with edges. Perfect, colors on both plan and isometric are where I want them, now I want to print this.
I select my print icon and change my paper size select my printer. I select extents, center the plot and fit to paper. I preview.. And my color disappears. What.. Am I doing wrong. Should I be making my paper representations from a different start?
Yesterday.. I was trying to do the same thing.. But starting with the drawing in constructs. I end up with the same, my isometric drawing looses most of its color, the windows have color as does one layer (a line showing the outline of the floor under). The plan drawing has most of the colors but some of the layers are black where in the model they have color. To further complicate the problem.. The same procedure making a first floor drawing has the plan in complete color.