Any program that can accept point clouds (which will be millions of points) from a 3D laser? Then we would like to create a solid model of the structures and piping.
View 5 RepliesWhen I create a sketch then extrude it to a solid model, how can I modify the sketch afterwards?
View 7 Replies View RelatedIs it possible to creat Single Line Isometric from the Piping Model?
View 4 Replies View RelatedI've got a DWG file generated from a software called 12D. It contains a polyline model of an embankment. I've imported it into Max and wanted to create 3D solids out of it so I can further manipulate this model and render.
I'm struggling to convert it into a 3D solid. I have tried the extrude and loft modifiers, but unable to get them to loft or extrude along the poly lines.
So I' thinking I may recreate the whole object from scratch vertex by vertex. How I can create a solid without recreating the whole object?
Attached a part of it for example here: [URL] ......
I have finally created the shell of the complex surface that you see. This is only a section of the part because I cannot show the whole thing for proprietary reasons. I formed solid surfaces using the network command. The propblem is that it will not convert to a solid because the surface seams are not "water tight." When the network command created the solid surfaces, the surface seams do not exactly match the lines so there are gaps in all the seams. I have tried blending, patching, etc. and nothing works. how to convert this to a solid without losing the outlines and the shape?
View 3 Replies View RelatedAm trying to convert this pump into solid ?
View 6 Replies View RelatedMy problem today is that I made a Model of a Part of a ship using surfaces rather than solids because the engineer thought it would be easier to bring into ANSYS program for analysis but he is now having a problem with it and I am looking into converting my current model to solid. I can do it but the method I thought of using is quite long winded and we are working to a tight deadline.
1.open up the surface part
2.use "Offset/Thicken"
3.any clashes between parts make a sketch and cut away.
the problem is the amount of plates I have and the time it takes to sort them out.
I'm currently working on a very large Dwg, with multiple pipe networks both sanitary, Storm and pressure pipe.
I need to create a .csv file for all my structures for Stakeout. I know I can go into my toolbox and create a report through the reports manager. The problem is that its giving me too much information, all I want is PNEZD. How can I create this report or edit that report being generated?
I am trying to create a table that will incorporate info from structures and pipes. In C3d 2010 I want to make a CB chart which will show the pipe size, starting structure and invert. I would also like to include the CB rim elevation but that would be under the structure table. Is there any way I can combine the RIm elevation with the pipe table?
View 4 Replies View RelatedWe received a surface model from a vendor that I have patched up as best I can, it still has one hole that I can find that I haven't been able to fill. Ideally we would like to have a solid model, but I'm running out of time to get this done and the surface model we have would be good enough for our purposes IF I can get the yellow surface tangent lines to turn off or change their color to black.
I've attached a jpg of the surface model with the yellow lines and uploaded the model here: [URL].....
I've be trying convert a 3D solid model to DGN file and until now no success!
When I tried to export the model the error message of Figure 1 was returned. I'm using the settings of Figure 2. Is attached too, the DWG file for analysis.
I am trying to model I-Beams to s solid. I put 3d polyline around the front "I" then a path down the middle of the beam. I have tried extrude, sweep with aligned to path, and sweep not aligned - then put a patch on both ends. Use the command "surfsculpt" and it will not convert due to not being water tight. I delete the 3d poly and path line before patching.
We only have 2011 - Civil 3D.
I have a model of a boat from some database. It's build from 3D faces but I would like to make it a 3D solid with a thickness of 3mm.
I can convert the faces into a surface, but i can't seem to get any of the two models into a 3D solid. I have tried thicken, convtosolid and a lot of other options without luck.
I was wondering if I could make two surfaces, one smaller than the other, place them ontop of eachother and create solid between them?
I am using Autocad 2012 I have got a solid model with a lot of nuts and bolts, is it possible to get the nut to screw up the bolt (so it looks like it is moving up that bolt) also other parts also move it would be nice to make them look like they are moving to.
View 7 Replies View RelatedThe problem is about drawing a solid model like the one in the attachment, and I have problem with the triangle, I tried a lot of things, but unfortunately it's not the same as it should be
My work is in the attachment.
and one more thing, as it's my first time with these kind of drawing I need to know what's the meaning (10 Drill, 20 C'bore) for a circle and how I can do it you can find it in the attachment
I am working on a research project that requires that I scan a cast object and shell it out to a width of .125 inches. I used my school's 3D scanner to scan the cast, and I have a good model. I've made it a surface and exported it as an STP and an IGS into Inventor. I used the Sculpt feature to make it a solid object, but then I could not shell it because a few flaws in the cast made miniscule holes.
I then tried to use the scanning program's spline feature to cut the cast into splines to loft in Inventor. However, this made 5 non-connected lines at each location, so I couldn't loft. How to create a solid and then shell with either method?
I need information on how to create a 3D Solid Model from wireframe and surfaces using AutoCAD 2013.
View 7 Replies View RelatedIn attempting to use either 'export face as' or 'export sketch as' from a solid model in Inventor 2013 the resultant DXF file ALWAYS consists of PolyLines. This prevents other "downstream" software from properly importing the file as a DXF. Thus far the ONLY work-around I have found is to open the DXF in AutoCAD, Explode the polylines, and then re-save as a DXF from AutoCAD.
View 8 Replies View RelatedIs it possible to convert a .dwg file into a solid model using Inventor 2010?
I have attached a wireframe electric motor in .dwg format.
Inventor 2012
How I can get rid of the construction lines that show on a solid model so all l am left with is just solid colour.
View 6 Replies View RelatedI am in need of creating a solid drawing from my wireframe drawing in model space. I have never done any 3d modeling in autocad before it took me a few days just to get the wireframe of a staircase done! I have tried to render this object in viewport but it disappears after I click on it or move around, therefore I cannot see it in my paper layout. How do I make a rendered object stay? Also I want to plot this on 22x34in and 11x17in paper, how would I go about getting a high quality rendered image. I am using autocad 2010.
View 4 Replies View RelatedI am trying to do some minor animation with a shaded solid model. I have tried mslide and a script... this make s very jerky, flashing animation.
I tried a lisp routine to move the object in small increments, again the motion is very flashy and slow, as it appears to struggle perhaps with the shading.
I noticed doing a move command, and moving the same object manually, dragging the object around the screen with a mouse makes for pretty smooth motion. Way better than what I was doing.... Is there a way to do this programatically?
Is there a way to easily "retrieve" solid model features and sketches from a stp file imported into Inventor Pro 2012 without having to recreate them?
View 2 Replies View RelatedI am trying to find a way to import a laser scanned mesh or point cloud file into Inventor (2013) such that I can use it to make a parametric representation of the form. The import format can be STL, OBJ, VRML, XYZ or PLY. I have tried the Mesh Enabler from Autodesk Labs but the files I am looking to work-on are bigger than the enabler can cope with and my system slows right down or locks-up.
I know bespoke reverse engineering software is the ideal way to go but I was hoping there was a way to model over a mesh to represent its form to create a placeholder in a parametric assembly. I'm not looking for accuracy, just a surface or solid output that can be constrained to native inventor parts. If I could get the files to STEP or IGES someway that would be enough.
I would like to be able to export from an Inventor .dwg or .idw made up of various views (either made from an Inventor .ipt or .iam) to an AutoCAD 2000 or later .dwg, and have the objects modeled in the Inventor .ipt/.iam that is shown in these views to already be shown as blocked entities when the AutoCAD .dwg is created. Also it is important to have the scale be exactly 1:1 from the Inventor drawing to the AutoCAD drawing that is created, so that no resizing/scaling is necessary. Is it possible to create such an AutoCAD 2D drawing from any release of Inventor and if so, what are the steps/procedure for making it???
I know that the solid model of an .ipt or .iam can be made to show blocked edges that appear as a block so why not two steps further and have this capability translate through to an .ipt or .iam Inventor drawing to a save copy as AutoCAD drawing???
I have drawn a site plan in model space at 1to1 scale. I try to draw hidden lines to show demolition. In paper space the scale is set to 1"=50" to fit on paper. But all the hidden lines plot solid. I had changed LTSCALE, PSLTSCALE, to 1. This problem keeps happening in most every thing I draw.
View 8 Replies View RelatedAs part of a larger job we have surveyed the top of a dry stone wall. The client now wants that we make a solid for him from the surveyed points with a height of 2000mm (the drawing units are in millimetres).
A 3d polyline was created from the lines joining the points and I have that in the attached drawing.
I'm not looking for someone to create the wall, but I'm looking for the method to do it, as it will certainly crop up again with this new client. I've tried many ways in both AutoCAD and Civil 3D but just can't create the solid.
Creating object in 3D solid? The circles have the same height in both edges.
View 6 Replies View RelatedI'm trying to create a Solid 3d that is the extrusion solid af a closed polyline by a given height
I select the polyline that i do this
Solid3d s = new Solid3d();
s.CreateExtrudedSolid(selectedPolyline, new Vector3d(0, 0, 20), new SweepOptions());
but Autocad throw an Invalid Input exception.
I'm trying to create a 3D solid from four 3d polylines that represent a bridge deck .
If it is not possible to create a 3D solid, can i create a surface?
I like to create a chin from 2 ellipses profile. I used the Loft command and it does not allow me to complete the command. Did I use the right command wrongly? Or there is another way to do so?
View 4 Replies View Related