AutoCAD 2010 :: Create 3D Solid From Four Polylines?
Aug 4, 2011I'm trying to create a 3D solid from four 3d polylines that represent a bridge deck .
If it is not possible to create a 3D solid, can i create a surface?
ADVERTISEMENT
AutoCAD 2010 :: Converting Polylines With Width And Text Into Close Polylines
Jan 2, 2014As the above mentioned, I have a drawing drawn using polylines with width from someone. The width of the line are suppose to represent area,
To put things into prospective, here is an example:
The polyline is 10 unit long and with a width of 2 unit wide. If i explode that polyline, it will become a single polyline without width. The line are suppose to represent 10 unit long and 2 unit wide; representing an area.
My question is is there a way to change the line above directly from polyline with width to a close polyline (4 x polylines) of 10 unit long and 2 unit wide.
AutoCAD 2010 :: How To Create Solid From Vertices
Jul 29, 2012I have borehole data of a site, where I want to sort of extrapolate the borehole data to the whole site, so that I can have a 3D soil model of the whole site. I have attached my DWG file, the vertical lines represent the borehole data and different colors represent different types of soil.
I'm thinking of manually extrapolating the data to the edges of the site, then split the site area into few different parts, and then create solids for each part, where each point is a vertices of a solid. But how to create a solid from 8 vertices, which would naturally form a closed solid like a box.
Besides this, are there any other methods of achieving what i want (3D soil model from borehole data)?
AutoCAD 2010 :: LOFT - Can't Create 3D Solid Because Of Spline Surface
Jun 17, 2011As you can see, the nature of my model forbids me from making a 3D solid using LOFT.
The top surface is consisted of 3D polyline and arc, which if "joined" will be become a spline.
The bottom surface can easily be joined into polyline.
If I loft the top and bottom, it'll only give me a LOFTED Surface, which is not I want (wanted a 3D solid).
AutoCAD 2010 :: How To Create Solid Arrow Head For Multileader
May 10, 2012See attached file.
I have this special type of callout, which is not easy to draft, but it looks pretty in plans. Is there any easy way to convert this to multileader?
Usually, I create it as block, insert it and change location of solid arrow around textbox. If I want to relocate this callout, Its not that easy as like multileader. I have to move solid arrow around textframe (from one corner to other) to point the same location. can this be done automatically (like mleader?)
AutoCAD 2010 :: How To Create Complex 3D Solid For Buildings Ceiling
Jun 4, 2013I have a problem when designing one building in 3d. The thing is i want to create a 3d model made only out of 3d solids. So there is this complex ceiling, I made out of 3 meshes and above it, in the above floor, there's a non complex plate.
[URL] ........
This meshes are made based on the actual dimensions of different sides of the floor, are unique and are good approximation of the actual building's ceiling. So, I want to make 3d solid that would have the same bottom shape and the same - even top as in the picture if the space between the objects would be filled out.
AutoCAD Map 3D :: Convert Polylines To 3D Solid Without Loosing Object Data
Sep 15, 2011is there any possiblity to convert the Polylines containing object data to a 3D Solid so that the object are also copied?
View 9 Replies View RelatedAutoCAD 2010 :: Remove Line Inside Solid Object / Transparent Solid Objects?
Sep 16, 2013How can I remove the lines in the middle after I press and pull the objects.
Attached is the Untitle.jpg, to make more clearer to you. Blue is the wall and skyblue is the aquarium. I want the back and the front of the aquarium don't have any line in the middle but even I do shade command the fill of the color is still there. Cause if I explode and delete the line in the middle the colors that fill the aquarium are getting rid off See Untitled 2.Jpg to see what I mean. And also how can make the aquarium Untitle 3.jpg transparent?
AutoCAD 2010 :: Matching Polylines
Jan 3, 2013I have drawings at the moment where I need to convert some lines to polylines. I know you can use PEDIT and PEDITACCEPT=1 but i want to match properties at the same time.
Just wondering if there is a comand or lisp routine that duplicates the MATCHPROPERTIES command but converts lines to plolylines at the same time, this way all i would need to do is type in the appropriate command and select my source polyline and get multiple duplicate polylines by clicking the lines I wish to change?
AutoCAD 2010 :: 3d Polylines And Linetypes
Jun 29, 2012Is there any way to have 3d polylines show a linetype? I need to have my contours that are created as a 3d polyline show up as a hidden linetype. These polylines came from an aerial mapping and have lots of vertices.
View 5 Replies View RelatedAutoCAD 2010 :: Convert Polylines To Points
May 18, 2012I have a contour set created using polylines and I want to convert this to points. Can I do this in AutoCad 3D Map?
View 3 Replies View RelatedAutoCAD 2010 :: Unable To Join Polylines
Feb 29, 2012why I cannot join the various polylines in the attached example? My objective is to create 2 closed polylines, Line 1 and Line 2.
View 1 Replies View RelatedAutoCAD Civil 3D :: How To Create Polylines Using Survey Data
Feb 15, 2013I want to create a road map using the survey data. Iv'e got some examples attached below.
How to create such type of drawings in autocad civil 3d.
AutoCad :: Transfer 3D Polylines From Civil 3D 2010 To 2004?
Jul 6, 2011How do I transfer 3d polylines from civil 3d 2010 to 2004?
View 2 Replies View RelatedAutoCAD 2010 :: How To Convert Solid To Polyline With Mechanical 2010
Nov 8, 2012I'm using AutoCAD Mechanical 2010 and received a .DXF file that contains 'solid' objects. Unfortunately the next tool in my workflow doesn't understand 'solids' only polylines (and a few other basic shapes like circles, lines, etc). Is there some way to convert the object in AutoCAD?
I tried the 'boundary' command but when it asks to 'Pick Points' and I click inside the solid, it always gives the error 'Valid hatch boundary not found'.
What am I missing here?
AutoCAD Civil 3D :: Batch Create Points Along Multiple Polylines
Oct 9, 2013I have the need to put COGO points along the vertices of multiple 3D polylines in a DWG. I know how to do this individually for each 3DPL via the "Points>Create - Miscellaneous > Polyline Vertices - Automatic" or "CREATEPTPLYLNCTRVERTAUTO" command. Need tip on how to do this in a batch format for all the selected 3D PLines in the drawing without having to select each individual 3DPL and having to hit return to enter a description for each individual vertex? I can do without having to add a description and can leave each description blank or enter the same description for each.
I'm Using C3D2013.
AutoCAD 2010 :: 2012 Hangs When Blocks Or Polylines Are Selected?
Mar 9, 2012Whenever I select a block or polyline in 2012, the program hangs for about 1 minute. This never happens when using 2010 on the same system. Obviously this can't continue.
View 3 Replies View RelatedAutoCAD 2010 :: Adding Multiple Polylines In Feet And Inches
Oct 8, 2012Is there a way that I can add multiple polylines in feet and inches? I downloaded some lisp routines, but they are not in feet and inches.
View 2 Replies View RelatedAutoCAD 2010 :: How To Select Multiple Polylines Before Typing In PEDIT
Jun 29, 2012In 2007, I was able to select multiple polylines before typeing in PEDIT. When I was done with the command, I could then type in PEDIT and L for last and it would select the multiple polylines I had first selected. We just got 2012, and when I do L now it just selects one line. Can I change this?
View 7 Replies View RelatedAutoCAD Visual LISP / AutoLISP :: Create Sub Areas From Intersecting Polylines
Oct 17, 2011Essentially, I'll be creating a sort of Venn diagram. So for the purposes of this exercise, let's assume it's the classic Venn diagram of three intersecting circles. But I need this to work with closed polylines, that may also have arc segments in them.
Anyway, so I have these intersecting areas, and I need to create bounding polylines for each area, and assess the number of overlaps. So, as in a Venn diagram, the areas where only one circle is present can then get shaded one color, areas where two circles are overlapping can get a different color, and the area where all three circles overlap can get a third color.
I'm clearly going to have to be converting the various boundaries to Regions, and performing some Unions. It seems I could grab all objects, convert them to Regions 2 at a time, and compare their Union'ed area to their individual area, to determine if they overlapped at all. With only the 3 cirlces, that would work, but when I have 35 individual polyline areas with arcs, suddenly this method feels like it will break down.
AutoCAD Visual LISP / AutoLISP :: How To Create Polylines Using Notepad Coordinates
Mar 5, 2013I have few co-ordinates in notepad like mentioned below. How can i create polyline using read-line function in auto lisp.
x y
0.0,0.0
2.0,0.0
2.0,1.0
0.0,1.0
2.0,0.0
4.0,0.0
4.0,1.0
2.0,1.0
AutoCAD Civil 3D :: Create Stage-storage Table With Six Closed 2D Polylines?
Nov 1, 2012I'm trying to create a stage-storage table with six closed 2D polylines. They highlight when I select them, but nothing is loading in the Table?
View 8 Replies View RelatedAutoCAD 2010 :: Hatch Area And Delete Polylines Then Reconstruct Boundary
Aug 25, 2009I have several days of experience with Autocad 2010... The problem: I have many (a lot) polylines in my 2D drawing that are adjacent to each other, but not joined. What is a good way of joining them, so that those that "touch" each other become one? Maybe I can hatch the area, then delete polylines and then reconstruct the boundary?
View 9 Replies View RelatedAutoCad :: How To Draw 3D Polylines Or Convert Single Lines To Polylines
Oct 9, 2013How to draw 3D polylines, or convert single lines to polylines?
this.JPG
AutoCAD Civil 3D :: Option Or Lisp Routine To Create 3d Boundary From Closed 3D Polylines?
Jun 18, 2013is there an option or a lisp routine to create a 3d boundary from closed 3d polylines?
View 8 Replies View RelatedAutoCad :: Converting 3D Polylines To Polylines With Elevation?
Jan 20, 2006Is there a way of converting 3d polylines to polylines with an elevation?
I have a dwg of contour information, the contours are 3d polylines, because they are contours the z value is constant all along the line, so there no question what the elevation of the polyline would need to be.
I need to do this as I then need to import the dwg into a GIS programme called MapInfo whch doesn't read 3d polylines.
I have access to AutoCAD 2004 or 2005LT.
AutoCad 3D :: Create A Solid From 3D Polyline
Jun 13, 2013As part of a larger job we have surveyed the top of a dry stone wall. The client now wants that we make a solid for him from the surveyed points with a height of 2000mm (the drawing units are in millimetres).
A 3d polyline was created from the lines joining the points and I have that in the attached drawing.
I'm not looking for someone to create the wall, but I'm looking for the method to do it, as it will certainly crop up again with this new client. I've tried many ways in both AutoCAD and Civil 3D but just can't create the solid.
AutoCAD 2010 :: Solid Will Not Subtract?
Mar 27, 2013I have a solid of a vortex breaker for a nozzle in a cone, from which I subtracted the cone. But when I attempt to subtract the nozzle as well, it will not subtract. I have verified that both entities are solids. I copied them into a new drawing by themselves. I even rebooted my computer--all to no avail. I have attatched a drawing of the two solids.
View 2 Replies View RelatedAutoCAD 2010 :: Drawing Cut Out In 3D Solid
Jun 27, 2013I want to add a cut out in a lid I have drawn to represent where a door will be installed, what steps do I needto take to accomplish this?
View 1 Replies View RelatedAutoCAD 2010 :: DWG 3D Solid Model To DGN
Mar 9, 2012I've be trying convert a 3D solid model to DGN file and until now no success!
When I tried to export the model the error message of Figure 1 was returned. I'm using the settings of Figure 2. Is attached too, the DWG file for analysis.
AutoCAD 2010 :: 3D Solid To 3D Mesh
Jan 20, 2013I am working on 3D modelling of a building in AutoCAD 2010. The 3D model has 7 elements ie walls, roof and its constituents and floor and its constituents. I have to mesh the 3D model created so that I can use the meshed model for further analysis. Is there any method for meshing the created 3D model in AutoCAD?
View 1 Replies View Related