AutoCAD 2010 :: How To Create Solid Arrow Head For Multileader
May 10, 2012
See attached file.
I have this special type of callout, which is not easy to draft, but it looks pretty in plans. Is there any easy way to convert this to multileader?
Usually, I create it as block, insert it and change location of solid arrow around textbox. If I want to relocate this callout, Its not that easy as like multileader. I have to move solid arrow around textframe (from one corner to other) to point the same location. can this be done automatically (like mleader?)
View 5 Replies
ADVERTISEMENT
Feb 20, 2013
When I "move a dimension with Leader" is there a way to create an arrowhead on the create3d leader. After I create a Linear Dimension I select it and hover over the blue box in the dimension text and select 'Move with Leader" and the leader does not have an arrowhead. Is there an easy way to do this? Autocad 2012.
View 4 Replies
View Related
Oct 4, 2012
The multileader arrow is not showing even if the number is increased (ie from "4" to "10") in the multileader dialog box or under the properties when modified.
View 2 Replies
View Related
Dec 2, 2011
I have used v2006 til recently. Now I use LT 2010. I just use multileaders for arrows. I am starting at the arrow head, and I want the tail to end on the "endpoint" of a line. When I "right click" to finish the command, the tail of the arrow "jumps off" the endpoint or nearest or whatever snap point I use. I have looked in the settings and turned all the text & landings off & set break size to zero.
View 2 Replies
View Related
Jun 22, 2012
I can't figure out why only on one layer the arrowheads on dimensions are not solid. They are made up of low resolution hatches.
Also the screen shows black and white when plot is in monochrome and color only when the plot setting are for color.
I can't figure out how to keep the screen in color regardless of plot settings.
View 3 Replies
View Related
Sep 5, 2013
I'm trying to flip an arrow head dimension so that it appears within the two dimension lines pointing outwards. I understand that in previous versions of AutoCAD you could just right click -> flip arrow heads, but this version (AutoCAD Electrical 2014) seems to lack this feature...
View 9 Replies
View Related
Feb 18, 2013
I created a leader with _DOT arrow using .NET, the size of leaderhead is 0.18" in default. I want to change to other sizes but I did not find the key word. How to set arrow size of leader.
View 2 Replies
View Related
Feb 24, 2009
how can I change the default arrowhead size from 3/32 to 5/32... I am able to change it from the palettes only after I insert it.
I would like to have all leaders of all styles match the same style far as arrowhead size... multi-leaders are defaulted as 5/32 and after using them forwe like them this size verses the 3/32 size of the quick leader.
View 3 Replies
View Related
Nov 17, 2009
I have some working code that sets the Text Style name to ROMANS inside my Mleader Style called ARROW. Here it is:
(setq dict (dictsearch (namedobjdict) "ACAD_MLEADERSTYLE") ; start setq q
dict1 (member (cons 3 "Arrow") dict) ; code 3 is Mleader Style Description
el1 (entget (cdr (assoc 350 dict1))) ; code 350 is dictionary entity handle
er (tblobjname "style" "Romans") ; new value for MLEADER Text Style
) ; end set
(entmod (subst (cons 342 er) (assoc 342 el1) el1)) ; code 342 is MmTextStyleId - write new vale to mTextStyleId
I want to modify this code so that it sets the Arrow Head Size to a specific value, say 0.125. Having a tough time figuring out the DXF codes and tblobjname to do this.
View 1 Replies
View Related
Aug 4, 2011
I'm trying to create a 3D solid from four 3d polylines that represent a bridge deck .
If it is not possible to create a 3D solid, can i create a surface?
View 8 Replies
View Related
Jul 29, 2012
I have borehole data of a site, where I want to sort of extrapolate the borehole data to the whole site, so that I can have a 3D soil model of the whole site. I have attached my DWG file, the vertical lines represent the borehole data and different colors represent different types of soil.
I'm thinking of manually extrapolating the data to the edges of the site, then split the site area into few different parts, and then create solids for each part, where each point is a vertices of a solid. But how to create a solid from 8 vertices, which would naturally form a closed solid like a box.
Besides this, are there any other methods of achieving what i want (3D soil model from borehole data)?
View 1 Replies
View Related
Jan 16, 2012
I have this north arrow that is not working in a clients drawing. Look at this drawing with the block in it and determine why the arrow head is filled in the block editor but not filled in the drawing (model space)???
View 3 Replies
View Related
Oct 17, 2013
Mleader arrow head didn't change size when change the scale on Object property?
The Arrow head size didn't change corresponding to the scale, i included the pic below, the top picture, the arrow head was set at .18" but was really small when i plot out, so i wanted to make it bigger, when i changed to .50" or .75" or even 1" the arrow head became even smaller than .18". Only when .18" than the arrow side is legible
Mleader.jpg
View 9 Replies
View Related
Jun 17, 2011
As you can see, the nature of my model forbids me from making a 3D solid using LOFT.
The top surface is consisted of 3D polyline and arc, which if "joined" will be become a spline.
The bottom surface can easily be joined into polyline.
If I loft the top and bottom, it'll only give me a LOFTED Surface, which is not I want (wanted a 3D solid).
View 3 Replies
View Related
Jun 4, 2013
I have a problem when designing one building in 3d. The thing is i want to create a 3d model made only out of 3d solids. So there is this complex ceiling, I made out of 3 meshes and above it, in the above floor, there's a non complex plate.
[URL] ........
This meshes are made based on the actual dimensions of different sides of the floor, are unique and are good approximation of the actual building's ceiling. So, I want to make 3d solid that would have the same bottom shape and the same - even top as in the picture if the space between the objects would be filled out.
View 5 Replies
View Related
Jan 9, 2013
i am trying to edit the arrow? When i click on it, it shows as a solid under properties. I need to resize that arrow, Just dunno how to do it?
View 9 Replies
View Related
Sep 16, 2013
How can I remove the lines in the middle after I press and pull the objects.
Attached is the Untitle.jpg, to make more clearer to you. Blue is the wall and skyblue is the aquarium. I want the back and the front of the aquarium don't have any line in the middle but even I do shade command the fill of the color is still there. Cause if I explode and delete the line in the middle the colors that fill the aquarium are getting rid off See Untitled 2.Jpg to see what I mean. And also how can make the aquarium Untitle 3.jpg transparent?
View 9 Replies
View Related
Sep 16, 2013
Apart from FLATTEN, is there a way to change the Z coordinates of an MLEADER to stop the text from appearing bold.
FLATTEN explodes the MLEADER & is thus not suitable for this.
View 9 Replies
View Related
Nov 28, 2012
I'm snapping to the corners of my multileader text boxes. OSNAPNODELEGACY is set to 1 and I'm not snapping to regular text or mtext. How can I change this behavior for the multileader text?
View 6 Replies
View Related
Sep 20, 2012
Autocad2010 there is a blue triangle preceding layer name in property box on some layers as shown on attached image. Sometimes these layers are turned on when viewing paperspace, sometimes they do not show up.
View 3 Replies
View Related
Oct 23, 2012
Is there anyway to save a multileaderstyle so that I don´t have to create it every time I open a new drawing?
View 3 Replies
View Related
Nov 27, 2012
I noticed that some multileader move when editing and some do not. This is very frustrating. Usually this seems to happened when annotative scale is on. I tried to avoid this happening by turning off annotative scale and this does not work. Instead I go to another file to find the other multileader text that doesn't move when I edit. I tried to find what causing this shift in the properties menu but can't see the difference between the two.
How to stop the multileader shifting!? Is this a bug?
View 2 Replies
View Related
Sep 18, 2013
I have noticed on several drawings that the multileaders change themselves when the drawing is closed and opened again. I put the multileaders in, they look fine, and when I close and open the drawing the multileader has extended itself across my text. If I edit it it fixes itself but it 'breaks' itself again once I close and open.
View 2 Replies
View Related
Sep 13, 2010
I am just wondering how is possible to set up a Multileader style that creates text with a background mask.
I have been trying to get this feature in the Multileader style manager and I could not find it in order to avoid to set up background mask every time I create a Multileader
View 6 Replies
View Related
Nov 9, 2013
in general, I add my multileaders in paperspace after I have set my model space scale. However, I am now bound to that scale! That is, ML in paperspace really only have one scale: 1-1, right? For example, I wanted to zoom in to a part of my project (ie, reduced my scale by a 1/3) and all my ML we pointing erroniously into space.
Just so I undestand, if one anticipates changing the scale of a drawing mid-project, the ML should be made annotative, and placed in model space?
View 1 Replies
View Related
May 29, 2009
Actually We are trying AutoCAD 2010 and i have a question about multileader i cannot find in the manual.we are used to set a bright background mask under our text (including Mtext, Qleader, Dimensions) this way the printed text can be seen much better in dark area.
Now i'm am upgrading from AutoCAD 2007 and discovering Multileader (and i cannot find the Qleader button on the ribbon) so i conclude the new "standard is multileader", this is annoying because i cannot find anywhere how to put text mask background inside text in mleader. any option available? i would like to begin to use this function, but the text background is mandatory here.
View 8 Replies
View Related
Jan 17, 2012
how to create a selection set based on a specific Multileader style? I can currently creating a typedvalue array to define the filter criteria, but cannot find the DXFCODE for the Multileader style.
Ex.
TypedValue[] acTypeValAr = new TypedValue[1];
acTypeValAr.setvalue(new TypedValue(DXFCODE, "Multileader Style"),0);
View 2 Replies
View Related
Dec 3, 2013
I have recently converted mtext to multileader text & i thought it was causing some issues but now im not so sure. Some of my users are experiencing a long time to regen & it has caused some peoples computers to freeze up. Is there a setting or a variable that could be causing this? I am not sure if this is an issue with the multileaders or with autocad release 13 or 14 in general. I had the users turn regenauto off until i can find a solution.
View 3 Replies
View Related
Jun 24, 2013
When we copy multileadered items from one viewport to another the leaders do not show up, but the text does.
View 3 Replies
View Related
Feb 4, 2011
When using grips to move a multileader source block with the attachment defined as insertion point (the insertion point being the center of the source block) the grip point moves off of the block if the move is to the left of the multileaders end point. When the drawing is reopened the blocks move from where they were placed to the off insertion point grips. A screen shots jpg and a drawing file are attached
View 2 Replies
View Related
Aug 8, 2013
I have a drawing with exsisting multileaders in it.
I am trying to apply the match properties to a newly created multileader but it isn't working.
View 5 Replies
View Related
