AutoCAD 2010 :: How To Create Complex 3D Solid For Buildings Ceiling

Jun 4, 2013

I have a problem when designing one building in 3d. The thing is i want to create a 3d model made only out of 3d solids. So there is this complex ceiling, I made out of 3 meshes and above it, in the above floor, there's a non complex plate.

[URL] ........

This meshes are made based on the actual dimensions of different sides of the floor, are unique and are good approximation of the actual building's ceiling. So, I want to make 3d solid that would have the same bottom shape and the same - even top as in the picture if the space between the objects would be filled out.

View 5 Replies

AutoCAD 2010 :: How To Create Complex Linetypes

Apr 11, 2012

I need to create a complex linetype for a fence. The line needs to consist of the following:

------X------X------X----- The linetype needs to be dynamic to any length.

View 9 Replies View Related

AutoCAD 2013 :: Converting Complex Solid Surface To Solid Model

Aug 12, 2013

I have finally created the shell of the complex surface that you see. This is only a section of the part because I cannot show the whole thing for proprietary reasons. I formed solid surfaces using the network command. The propblem is that it will not convert to a solid because the surface seams are not "water tight." When the network command created the solid surfaces, the surface seams do not exactly match the lines so there are gaps in all the seams. I have tried blending, patching, etc. and nothing works. how to convert this to a solid without losing the outlines and the shape?

View 3 Replies View Related

AutoCad 3D :: Using Fillet On Complex Solid

Jul 15, 2013

I'm trying to fillet the edge of a 3d solid guitar body and can't seem to make it happen.

See attached file.P Bass - Copy.dwg

View 9 Replies View Related

AutoCAD Map 3D :: How To Create 2.5D Buildings

Apr 27, 2012

I want to create 2.5D Buildings, like at google maps website.

Example:

How to do it?

View 9 Replies View Related

AutoCad 3D :: Convert Complex Objects Into Solid?

Oct 14, 2012

I want to convert a complex object into solid, so that I can measure its volume.

View 9 Replies View Related

AutoCad 3D :: Creating Complex 3D Object / Solid

Aug 31, 2012

I have the 3d model of a ship, but it has no surfaces or solids, just lines. I want to create some solids based on those lines.

It's better if i attach the dwg to the post and explain what i want to do:

- in the file attached there are some lines marked with red and blue
- i want to create a solid/3dobject by extruding/lofting the red lines along the blue lines.

In the drawing only a few lines are colored, for better understanding. I tried with loft, but it only creates some surfaces. The point is that i need a solid or a 3d object.

sampla.dwg

View 9 Replies View Related

AutoCAD 2010 :: Create 3D Solid From Four Polylines?

Aug 4, 2011

I'm trying to create a 3D solid from four 3d polylines that represent a bridge deck .

If it is not possible to create a 3D solid, can i create a surface?

View 8 Replies View Related

AutoCAD 2010 :: How To Create Solid From Vertices

Jul 29, 2012

I have borehole data of a site, where I want to sort of extrapolate the borehole data to the whole site, so that I can have a 3D soil model of the whole site. I have attached my DWG file, the vertical lines represent the borehole data and different colors represent different types of soil.

I'm thinking of manually extrapolating the data to the edges of the site, then split the site area into few different parts, and then create solids for each part, where each point is a vertices of a solid. But how to create a solid from 8 vertices, which would naturally form a closed solid like a box.

Besides this, are there any other methods of achieving what i want (3D soil model from borehole data)?

View 1 Replies View Related

AutoCAD 2010 :: LOFT - Can't Create 3D Solid Because Of Spline Surface

Jun 17, 2011

As you can see, the nature of my model forbids me from making a 3D solid using LOFT.

The top surface is consisted of 3D polyline and arc, which if "joined" will be become a spline.

The bottom surface can easily be joined into polyline.

If I loft the top and bottom, it'll only give me a LOFTED Surface, which is not I want (wanted a 3D solid).

View 3 Replies View Related

AutoCAD 2010 :: How To Create Solid Arrow Head For Multileader

May 10, 2012

See attached file.

I have this special type of callout, which is not easy to draft, but it looks pretty in plans. Is there any easy way to convert this to multileader?

Usually, I create it as block, insert it and change location of solid arrow around textbox. If I want to relocate this callout, Its not that easy as like multileader. I have to move solid arrow around textframe (from one corner to other) to point the same location. can this be done automatically (like mleader?)

View 5 Replies View Related

AutoCAD 2010 :: Buildings At Different Angles - Rotate Views

Jun 4, 2012

I have a site plan that has buildings at different angles. How do I rotate my view so that the buildings are displayed at a normal x,y view?

View 1 Replies View Related

Maya Modeling :: How To Create Buildings In A Photograph

Apr 10, 2012

How to construct buildings using maya or 3ds max which i have in a photograph?

View 4 Replies View Related

AutoCAD 2013 :: How To Create Reflected Ceiling Plan

Dec 10, 2012

How do you create an RCP or reflected ceiling plan in AutoCad 2013? There used to be a place in View to choose it and then enter cut through height.

View 2 Replies View Related

AutoCad :: Create 2x4 Ceiling Grid Hatch For Layout Planning

May 2, 2012

I'm trying to create a simple 2x4 ceiling grid hatch for layout planning, but AutoCAD keeps giving me an error when I try to use it.

Here's the custom hatch that I wrote at the very end of the acad.pat file:
*CGRID, 2x4 grid
0, 0,0, 0,48
90, 0,0, 0,24

When I load up ACAD, it shows the hatch in the selection, but after I've defined the area and I try to apply the hatch, I get this error in the command line:

Missing parameter on line 385.

View 6 Replies View Related

AutoCAD 2010 :: Remove Line Inside Solid Object / Transparent Solid Objects?

Sep 16, 2013

How can I remove the lines in the middle after I press and pull the objects.

Attached is the Untitle.jpg, to make more clearer to you. Blue is the wall and skyblue is the aquarium. I want the back and the front of the aquarium don't have any line in the middle but even I do shade command the fill of the color is still there. Cause if I explode and delete the line in the middle the colors that fill the aquarium are getting rid off See Untitled 2.Jpg to see what I mean. And also how can make the aquarium Untitle 3.jpg transparent?

View 9 Replies View Related

AutoCad 2D :: Create Complex Linetypes With Text

Jul 24, 2012

I am really new to AutoCAD and we are currently using AutoCAD 2007. I have managed to create a complex linetype with text. I have a DWG of the plan I need to lay utility cables on to. When I put a line with text into the model space, the text is really small so looks like a really small, continous line unless I zoom in until I can zoom in no more; I changed the scale so that the definition of the line and text was more visible (by changing linetype scale and lineweight) but when I go into the layout pages, the line just looks like a continuous thick line when I put the LWT on. If I return to model space and reduce scale and weight, it still looks like a continuous, thick line. The page size is A1..

View 4 Replies View Related

AutoCAD 2010 :: Sweeping Along A Complex 3DPolyline

Apr 16, 2013

I am modeling an ASME pressure vessel with a 2:1 semi elliptical head upon which there must be a couple of lines of .375" trace tubing. I created a 3dpolyine that is the center line of this tubing, and joined all the segments into one so as to be able to sweep the whole thing and make one solid of the tubing run, but it simply will not sweep. I get a message this it is "unable to sweep the selected object." If I break the 3dpolyline, I can sweep parts of it, but the more complex the line segment, I again get the error message. I have attached a copy of the tubing centerlines.

The one on the left is the joined 3dpolyline, the one on the right is the 3dpolylines unjoined. (These were achieved using an intersection command of a rotated surface--the head profile--and an extruded surface--the tube tracing plan layout.) I have done this before, but only with the unjoined 3dpolyline, as in the right-hand example, but that is very time consuming as each segment must be swept. But I recently acquired a third-party LISP routine that joins the 3dpolylines into one. I'm thinking there must be a limitation on data of the 3dpolyline preventing the sweep, and wondering if there is a setting or system variable that will allow the more complex 3dpolyline to be swept.

View 8 Replies View Related

AutoCAD 2010 :: Complex Filleting On 3D Model

Mar 24, 2012

I have a model that represents a casting with some finished surfaces that I'm trying to throw some fillets and rounds on but the software keeps balking at finishing the process. I've started at various points around the object only to be frustrated when I try to get the final edges to mesh with all the rest.

View 6 Replies View Related

AutoCAD 2010 :: Converting Complex Shapes To Polyline?

Nov 14, 2013

I recently exploded text but now i need it to be a Polyline, when using PEDIT.

View 1 Replies View Related

Revit :: Unable To Create Arrays Of Ceiling Light Fixtures

Jul 24, 2012

Having trouble creating arrays of ceiling light fixtures in Revit 2013? It gives me this error message;

'Can't place inserts outside of hosts. These elements won't be copied'

I've adjusted all manner of settings to make sure the copies don't fall outside the limits of the host ceiling but without success. It only occurs with linear arrays on ceilings not radial arrays for ceilings or linear or radial arrays for walls?

View 9 Replies View Related

AutoCAD Visual LISP / AutoLISP :: Create A Custom Complex Linestyle For A Stream

Sep 13, 2013

I am trying to create a custom complex linestyle for a stream. It's a line with 3 circles/dots. For the dots I want to actually create the circles. I know how to create shapes, compile and load linestyles. For some reason it does not work.

*STREAM-UCS, WATER BODIES -----ooo-----ooo-----ooo-----ooo-----
A,.6,-.15,[STREAM,ucs-ltype.shx,x=0,s=1],-.15
*1,1927,STREAM 4,250,4,4,3,167,3,13,3,176,002,9,(-51,0),(0,0),001,9,(0,3),(-3,3),(-1,0),(-1,1),(-2,0),(-1,-1),(-1,0),(-1,-1),(-1,0),(-1,-1) (0,-1),(-1,-1),(0,-4),(1,-1),(0,-1),(2,-2),(2,0),(1,-1),(2,0),(1,1),(1,0),(1,1),(1,0),(0,1),(1,1),(0,3),(0,0),002,9,(-3,-6) (0,0),001,9,(2,2),(0,0),002,9,(-2,-2),(0,0),001,9,(2,3),(0,0),002,9,(-2,-3),(0,0),001,9,(3,3),(0,0),002,9,(-4,-3),(0,0) 001,9,(4,3),(0,0),002,9,(-4,-3),(0,0),001,9,(4,4),(0,0),002,9,(-4,-4),(0,0),001,9,(4,4),(0,0),002,9,(-4,-4),(0,0),001 9,(4,4),(0,0),002,9,(-5,-4),(0,0),001,9,(5,4),(0,0),002,9,(-5,-5),(0,0),001,9,(5,6),(0,0),002,9,(-5,-6),(0,0),001,9,(5,6) (0,0),002,9,(-5,-6),(0,0),001,9,(5,6),(0,0),002,9,(-6,-6),(0,0),001,9,(6,6),
[code]....

View 9 Replies View Related

Revit :: Create Sort Of Grill Openings In Ceiling Of Underground Parking Level?

Jan 15, 2014

how I can create a sort of grill openings in the ceiling of an underground parking level? There are no ducts connected to it, it's just an opening between the underground level and the ground level, like a courtyard, for example?

View 1 Replies View Related

3ds Max :: Create A Complex Shape With Opacity Map

May 29, 2012

I am trying to create a complex shape with an opacity map. To keep things simple, consider an egg shape with heagon shaped windows. I have tried to create a solid / shell with boolean cut-outs, but getting these windows at the right angles is becoming very difficult.So, I tried a CV Surf with an opacity map. This allows for the windows to work well, but there is no depth to the surface.Is there a way to add depth to a CV surf object? Also, I want the map of the interior to be different from the exterior. A solid will have a ton of polygons, making mapping a huge time sink.

View 1 Replies View Related

AutoCAD 2010 :: How To Convert Solid To Polyline With Mechanical 2010

Nov 8, 2012

I'm using AutoCAD Mechanical 2010 and received a .DXF file that contains 'solid' objects. Unfortunately the next tool in my workflow doesn't understand 'solids' only polylines (and a few other basic shapes like circles, lines, etc). Is there some way to convert the object in AutoCAD?

I tried the 'boundary' command but when it asks to 'Pick Points' and I click inside the solid, it always gives the error 'Valid hatch boundary not found'.

What am I missing here?

View 1 Replies View Related

AutoCad 3D :: Create A Solid From 3D Polyline

Jun 13, 2013

As part of a larger job we have surveyed the top of a dry stone wall. The client now wants that we make a solid for him from the surveyed points with a height of 2000mm (the drawing units are in millimetres).

A 3d polyline was created from the lines joining the points and I have that in the attached drawing.

I'm not looking for someone to create the wall, but I'm looking for the method to do it, as it will certainly crop up again with this new client. I've tried many ways in both AutoCAD and Civil 3D but just can't create the solid.

View 9 Replies View Related

AutoCAD 2010 :: Solid Will Not Subtract?

Mar 27, 2013

I have a solid of a vortex breaker for a nozzle in a cone, from which I subtracted the cone. But when I attempt to subtract the nozzle as well, it will not subtract. I have verified that both entities are solids. I copied them into a new drawing by themselves. I even rebooted my computer--all to no avail. I have attatched a drawing of the two solids.

View 2 Replies View Related

AutoCAD 2010 :: Drawing Cut Out In 3D Solid

Jun 27, 2013

I want to add a cut out in a lid I have drawn to represent where a door will be installed, what steps do I needto take to accomplish this?

View 1 Replies View Related

AutoCAD 2010 :: DWG 3D Solid Model To DGN

Mar 9, 2012

I've be trying convert a 3D solid model to DGN file and until now no success!

When I tried to export the model the error message of Figure 1 was returned. I'm using the settings of Figure 2. Is attached too, the DWG file for analysis.

View 3 Replies View Related

AutoCAD 2010 :: 3D Solid To 3D Mesh

Jan 20, 2013

I am working on 3D modelling of a building in AutoCAD 2010. The 3D model has 7 elements ie walls, roof and its constituents and floor and its constituents. I have to mesh the 3D model created so that I can use the meshed model for further analysis. Is there any method for meshing the created 3D model in AutoCAD?

View 1 Replies View Related

AutoCAD 2013 :: Create 3D Solid Object

Jan 23, 2013

Creating object in 3D solid? The circles have the same height in both edges.

View 6 Replies View Related