AutoCAD 2013 :: Converting Complex Solid Surface To Solid Model
Aug 12, 2013
I have finally created the shell of the complex surface that you see. This is only a section of the part because I cannot show the whole thing for proprietary reasons. I formed solid surfaces using the network command. The propblem is that it will not convert to a solid because the surface seams are not "water tight." When the network command created the solid surfaces, the surface seams do not exactly match the lines so there are gaps in all the seams. I have tried blending, patching, etc. and nothing works. how to convert this to a solid without losing the outlines and the shape?
View 3 Replies
ADVERTISEMENT
Mar 4, 2008
We received a surface model from a vendor that I have patched up as best I can, it still has one hole that I can find that I haven't been able to fill. Ideally we would like to have a solid model, but I'm running out of time to get this done and the surface model we have would be good enough for our purposes IF I can get the yellow surface tangent lines to turn off or change their color to black.
I've attached a jpg of the surface model with the yellow lines and uploaded the model here: [URL].....
View 9 Replies
View Related
Oct 4, 2011
Am trying to convert this pump into solid ?
View 6 Replies
View Related
Jan 15, 2013
My problem today is that I made a Model of a Part of a ship using surfaces rather than solids because the engineer thought it would be easier to bring into ANSYS program for analysis but he is now having a problem with it and I am looking into converting my current model to solid. I can do it but the method I thought of using is quite long winded and we are working to a tight deadline.
1.open up the surface part
2.use "Offset/Thicken"
3.any clashes between parts make a sketch and cut away.
the problem is the amount of plates I have and the time it takes to sort them out.
View 1 Replies
View Related
Sep 28, 2012
I am trying to convert this composite surface into a single solid body, however when I try to stich the surfaces in the construction environment it always crashes. I have also tried edditing the STEP file import options but it still always opens as a composite surface.
View 7 Replies
View Related
Feb 1, 2010
Is it possible to convert a .dwg file into a solid model using Inventor 2010?
I have attached a wireframe electric motor in .dwg format.
Inventor 2012
View 9 Replies
View Related
Sep 17, 2013
I have a model of a boat from some database. It's build from 3D faces but I would like to make it a 3D solid with a thickness of 3mm.
I can convert the faces into a surface, but i can't seem to get any of the two models into a 3D solid. I have tried thicken, convtosolid and a lot of other options without luck.
I was wondering if I could make two surfaces, one smaller than the other, place them ontop of eachother and create solid between them?
View 6 Replies
View Related
Jan 19, 2013
I am trying to find a way to import a laser scanned mesh or point cloud file into Inventor (2013) such that I can use it to make a parametric representation of the form. The import format can be STL, OBJ, VRML, XYZ or PLY. I have tried the Mesh Enabler from Autodesk Labs but the files I am looking to work-on are bigger than the enabler can cope with and my system slows right down or locks-up.
I know bespoke reverse engineering software is the ideal way to go but I was hoping there was a way to model over a mesh to represent its form to create a placeholder in a parametric assembly. I'm not looking for accuracy, just a surface or solid output that can be constrained to native inventor parts. If I could get the files to STEP or IGES someway that would be enough.
View 1 Replies
View Related
Jun 1, 2013
I'm using ACAD 2014 Win8 64bit.
I need to slice a cylinder with a surface but the slice command keeps giving error " Inconsistent face-body relationships".
I created the surface from a solid that I created using solid intercept between the cylinder and another solid that the cylinder actually passes through (a housing I have). In my attachment I do not include the housing, just the cylinder, the solid intercept and the surface from the a face of the solid intercept.
I tried increasing the U & V isolines of the surface, and scaling it up so that it isn't bounded by the cylinder, but that didn't work.
I'm willing to try any technique that achieves the same goal - I need the butt of the cylinder to contour to the housing so that I can do a JOIN and have a solid housing with a cylinder sticking out of its face. The inside of the housing is hollow with a 0.05 inch wall.
PDS 2014/Win8 64/32GB RAM/256GB SSD RAID1/Asus P9X79 Deluxe/i7 3820/nVidia Quadro K2000D/Dual 27" LCD
View 3 Replies
View Related
Aug 27, 2013
Is it possible to trim a 3d solid using another 3d solid as a cutting edge? I want to cut the edges of a dam using the natural ground surface (which is also a solid) as my cutting edge.
View 3 Replies
View Related
Nov 15, 2012
The problem is about drawing a solid model like the one in the attachment, and I have problem with the triangle, I tried a lot of things, but unfortunately it's not the same as it should be
My work is in the attachment.
and one more thing, as it's my first time with these kind of drawing I need to know what's the meaning (10 Drill, 20 C'bore) for a circle and how I can do it you can find it in the attachment
View 9 Replies
View Related
Dec 13, 2012
i am having a hatching issue, it seems no matter what hatch pattern i use and what hatch scale, alot of the hatch looks solid instead of the pattern i want, for example i am using currently ANSI37 @ Annotative with a scale of .20 and on the same paperspace page one plan with the hatch shows the cross hatching and the other one below looks solid (see attached) now i can go and say change the hatch scale and it reverts to the cross hatching, but then when i zoom out it goes back to "solid" is it a graphical issue?
View 7 Replies
View Related
Jan 23, 2013
I need information on how to create a 3D Solid Model from wireframe and surfaces using AutoCAD 2013.
View 7 Replies
View Related
May 30, 2013
In attempting to use either 'export face as' or 'export sketch as' from a solid model in Inventor 2013 the resultant DXF file ALWAYS consists of PolyLines. This prevents other "downstream" software from properly importing the file as a DXF. Thus far the ONLY work-around I have found is to open the DXF in AutoCAD, Explode the polylines, and then re-save as a DXF from AutoCAD.
View 8 Replies
View Related
Jun 13, 2012
Need to attach a image to a solid 3d surface for rendering but every attempt fail.
View 5 Replies
View Related
Mar 1, 2013
I have a curved solid with a pattern subtracted from it in a model representing a sheet of mdf . is there a way to flatten the surface of the solid to get the geomerty of the cuts. I supose is same as matrial map.
View 1 Replies
View Related
Jul 15, 2013
I'm trying to fillet the edge of a 3d solid guitar body and can't seem to make it happen.
See attached file.P Bass - Copy.dwg
View 9 Replies
View Related
Oct 14, 2012
I want to convert a complex object into solid, so that I can measure its volume.
View 9 Replies
View Related
Aug 31, 2012
I have the 3d model of a ship, but it has no surfaces or solids, just lines. I want to create some solids based on those lines.
It's better if i attach the dwg to the post and explain what i want to do:
- in the file attached there are some lines marked with red and blue
- i want to create a solid/3dobject by extruding/lofting the red lines along the blue lines.
In the drawing only a few lines are colored, for better understanding. I tried with loft, but it only creates some surfaces. The point is that i need a solid or a 3d object.
sampla.dwg
View 9 Replies
View Related
Jun 4, 2013
I have a problem when designing one building in 3d. The thing is i want to create a 3d model made only out of 3d solids. So there is this complex ceiling, I made out of 3 meshes and above it, in the above floor, there's a non complex plate.
[URL] ........
This meshes are made based on the actual dimensions of different sides of the floor, are unique and are good approximation of the actual building's ceiling. So, I want to make 3d solid that would have the same bottom shape and the same - even top as in the picture if the space between the objects would be filled out.
View 5 Replies
View Related
Sep 2, 2013
I would like to know how can put planar surface to solid object which surface is curved like cylinder for example. When start draw from first point rectangle of planar surface follow x cordinate not that solid object. How to do that simply?
View 9 Replies
View Related
Aug 4, 2012
I have imported a wire frame as a dxf file from another 3d modeling program and want to know how to convert it to a civil 3d solid.
View 6 Replies
View Related
Apr 7, 2013
A customer has supplied me an STL file. It opens in Inventor but I can't measure it or place it into an IDW to dimension it.
Windows 7 x64 -64 GB Ram, Intel Xeon E5-1620 @ 3.6 GHz
ATI FirePro V7800 2 GB, 180 GB SSD & 1 TB HDD, Inv R2013 PDS Premium SP2 Update 3 (Build 200), Vault 2013 Workgroup Update 2 (Build 17.2.9.0)
View 9 Replies
View Related
Oct 14, 2010
I was given a .sat file from a third party company. When i pull it into CAD 2011 it comes in as a "body". It views like a wireframe object. I can't slice, subtract, union, etc. when i import it to Navis works it views like wireframe. The problem with this is that i can't run clash detection against this part then.
Any way to convert it to a solid?
View 1 Replies
View Related
Oct 11, 2013
URL....However when I try to export to .STL it won't do it because it is only surfaces and not a solid.I have searched everywhere on how to convert from surfaces to a solid but nothing I have tried has worked.
View 8 Replies
View Related
Mar 19, 2012
We have this need to have all of the solids in a drawing to be placed in the "solid" layer.
Sometimes folks are drafting lines to develop these solids, and keeping the lines on the "solid" layer, rather than moving them to another layer, or deleting them altogether.
I could get folks to run this command before leaving the drawing.
I'm thinking something along the lines of:
Select all entities that are on the solids layer that are not solids.
If nil, great, do nothing.
If entities are selected, let me do something with them.
I'm hoping the following can be modified ever so slightly.
(setq non_solid (ssget "X" (list (cons 0 "3DSOLID")(cons 8 "solid"))))
View 4 Replies
View Related
Sep 19, 2012
I'm trying to split a single solid body into 2 solid bodies. The problem is that the body I'm trying to split consists of two separate pieces. I can split a body when it is a single piece no problem, but I'm having the problem when the two pieces are not joined at all.
When I try and split it on the origin plane it gives this error:
"Creating parting line failed. Could not build this Split"
When I try and split it on a work plane lying on one of the pieces it gives this error:
"Creating parting line failed. Modeling failure in ASM. Redefine inputs."
Or, another variation on this erorr:
"Creating parting line failed. Split feature could not create two bodies. Change the Split Tool so that split feature can create two bodies."
View 4 Replies
View Related
Jun 18, 2013
I have a.3ds file imported into Civil 3d. The object imported as a polymesh in Civil 3d. I need the solid 3d object to do some edit like slice or union and subtract.
The question is "How can I import .3ds into Civil 3d as a solid objects or hoe can i convert polymesh to solid?"
View 9 Replies
View Related
Sep 16, 2013
How can I remove the lines in the middle after I press and pull the objects.
Attached is the Untitle.jpg, to make more clearer to you. Blue is the wall and skyblue is the aquarium. I want the back and the front of the aquarium don't have any line in the middle but even I do shade command the fill of the color is still there. Cause if I explode and delete the line in the middle the colors that fill the aquarium are getting rid off See Untitled 2.Jpg to see what I mean. And also how can make the aquarium Untitle 3.jpg transparent?
View 9 Replies
View Related
Nov 14, 2012
I want to convert an open shell as shown in picture 1st to a closed solid as shown in picture 2. I want to subtract something later from it so it needs to be solid.
View 9 Replies
View Related
Jul 10, 2013
Is there away to trim the diagonal 3d solid to the top of the horizontal 3d solid in the picture.
View 4 Replies
View Related
