I have a.3ds file imported into Civil 3d. The object imported as a polymesh in Civil 3d. I need the solid 3d object to do some edit like slice or union and subtract.
The question is "How can I import .3ds into Civil 3d as a solid objects or hoe can i convert polymesh to solid?"
I have some objects in AutoCAD Architecture that I need to convert from polymesh to solid. How to do this? I also have Revit Architecture if I can do it in there..
The objects are 3D light fixtures on a 2D floorplan. Can I export the whole drawing as one to convert it?
I have some objects in AutoCAD Architecture that I need to convert from polymesh to solid. I also have Revit Architecture if I can do it in there..
The objects are 3D light fixtures on a 2D floorplan. Can I export the whole drawing as one to convert it?
How can I remove the lines in the middle after I press and pull the objects.
Attached is the Untitle.jpg, to make more clearer to you. Blue is the wall and skyblue is the aquarium. I want the back and the front of the aquarium don't have any line in the middle but even I do shade command the fill of the color is still there. Cause if I explode and delete the line in the middle the colors that fill the aquarium are getting rid off See Untitled 2.Jpg to see what I mean. And also how can make the aquarium Untitle 3.jpg transparent?
How can i convert some solid bodies to a single solid.
View 8 Replies View RelatedI want to convert a complex object into solid, so that I can measure its volume.
View 9 Replies View RelatedTwo IGES parts and try to convert them to a solid. I've tried all I can think of with no good result.
I can't get them uploaded, file is too large, what can I do?
I am using C3D 2012. I my drawing I have 3D solid objects that I want projected into my roadway x-sections. When I use the menu command to "project objects to section views" and select "solids" I get the message "no objects to project". Are their different types of solid objects in autocad?
View 9 Replies View RelatedWe have this need to have all of the solids in a drawing to be placed in the "solid" layer.
Sometimes folks are drafting lines to develop these solids, and keeping the lines on the "solid" layer, rather than moving them to another layer, or deleting them altogether.
I could get folks to run this command before leaving the drawing.
I'm thinking something along the lines of:
Select all entities that are on the solids layer that are not solids.
If nil, great, do nothing.
If entities are selected, let me do something with them.
I'm hoping the following can be modified ever so slightly.
(setq non_solid (ssget "X" (list (cons 0 "3DSOLID")(cons 8 "solid"))))
I'm trying to split a single solid body into 2 solid bodies. The problem is that the body I'm trying to split consists of two separate pieces. I can split a body when it is a single piece no problem, but I'm having the problem when the two pieces are not joined at all.
When I try and split it on the origin plane it gives this error:
"Creating parting line failed. Could not build this Split"
When I try and split it on a work plane lying on one of the pieces it gives this error:
"Creating parting line failed. Modeling failure in ASM. Redefine inputs."
Or, another variation on this erorr:
"Creating parting line failed. Split feature could not create two bodies. Change the Split Tool so that split feature can create two bodies."
I have finally created the shell of the complex surface that you see. This is only a section of the part because I cannot show the whole thing for proprietary reasons. I formed solid surfaces using the network command. The propblem is that it will not convert to a solid because the surface seams are not "water tight." When the network command created the solid surfaces, the surface seams do not exactly match the lines so there are gaps in all the seams. I have tried blending, patching, etc. and nothing works. how to convert this to a solid without losing the outlines and the shape?
View 3 Replies View RelatedIs it possible to trim a 3d solid using another 3d solid as a cutting edge? I want to cut the edges of a dam using the natural ground surface (which is also a solid) as my cutting edge.
View 3 Replies View RelatedIs there away to trim the diagonal 3d solid to the top of the horizontal 3d solid in the picture.
View 4 Replies View RelatedI am making a design on inventor 2013 for a colleague who does not know how to use the inventor.
I want to make the solid and then set something up that allows the user to change a few of the parameters of the solid in a very user friendly way (i.e. a box that says "cylinder radius" and has an input box so the user can enter a value).
i am having a hatching issue, it seems no matter what hatch pattern i use and what hatch scale, alot of the hatch looks solid instead of the pattern i want, for example i am using currently ANSI37 @ Annotative with a scale of .20 and on the same paperspace page one plan with the hatch shows the cross hatching and the other one below looks solid (see attached) now i can go and say change the hatch scale and it reverts to the cross hatching, but then when i zoom out it goes back to "solid" is it a graphical issue?
View 7 Replies View RelatedI want to subtract smaller solid from bigger solid.I can not understand how to move smaller solid and place it in front of bigger solid.
View 6 Replies View RelatedI have this chair in 3d but it consists of 3d faces and i can not convert all of them into surfaces or solids...only the faces that are on the same plane can be converted. Since the object is a little curved...i get the message"faces are not coplanar"...or something.
View 9 Replies View RelatedIs it possible to convert surface into solid in AutoCAD 2002?
For example, can I convert these five surfaces into a solid pyramid?
If yes, what is the step to do it?
Then I need to extrude it, but when I extrude, it's shallow. So this 2D polygon need to have face. I've tried 3DFACE but then I need to add faces manually. Is there any way to just specify this polygon and have it faced?
View 9 Replies View RelatedIs there any way to convert a surface to solid?
View 4 Replies View RelatedSupposedly there's a way "To Convert One or More Surfaces to Solids":
[URL]
However, I'm unable to find Home tabSolid Editing panelThicken.
I'm trying to take LIDAR/Point Cloud data and 3D print it (in the end, I need to make an STL file). I've created a 3D surface from Point Cloud data which results in a Raster Layer. I do not know how to convert the surface that's in the Raster Layer into a solid.
i have recived an igs fle which i imported into auticad 2012.when imported the and saved as an .dwg the model is in surfaces, im looking to convert the surface to solid so i can export the file as an .stl for 3d printing. is it possible to convert this?
View 7 Replies View RelatedI'm creating an iPhone 4 case so it has a logo on it for my teacher. I got the case from thiniverse. It was a polyface mesh. i tried to subtract from it but it didn't work. I tried convtosolid but it didnt work. I exploded them and selected the outside shell and extruded all of the objects inward. Then when i tried to union them together, some of them would union, but not all of them together. im trying to export it as a .stl so I can use it with a 3D printer...
I'm using AutoCAD 2010 Educational version.
I tried to convert the cone surface which is created by revolving line, to solid, but always fail. how to convert it? (Autocad 2013)
View 9 Replies View RelatedIs there a "simple" way to convert a 2d immage (photoshop file) to a 3d solid?
Basically I have a 2D image (a discus of sorts) that has geometrical shapes "cut out of it" (Imagine a circle with a triangle "missing" inside) and I'd like to create a evenly high discus with a triangle hole in it).. Let's say a coin that misses a triangle in it's mid.
Clearly I could draw a circle (surface) extrude it, then create a triangle (surface) and extrude that one and subtract one from the other, but since the image I have is a bit more complex I just wanted to know if there is a quicker/easier way.
Also I have a text in my discus, and drawing a text surface in AutoCAD is not really easy.
How to convert 3d dwg files to solid bodies ?
View 6 Replies View RelatedI am working on a research project that requires that I scan a cast object and shell it out to a width of .125 inches. I used my school's 3D scanner to scan the cast, and I have a good model. I've made it a surface and exported it as an STP and an IGS into Inventor. I used the Sculpt feature to make it a solid object, but then I could not shell it because a few flaws in the cast made miniscule holes.
I then tried to use the scanning program's spline feature to cut the cast into splines to loft in Inventor. However, this made 5 non-connected lines at each location, so I couldn't loft. How to create a solid and then shell with either method?
I needed to prepare a Map in which certain area has to be marked out. I did with hatching spending hours on it. But i need to convert it into solid colors. Is it possible to convert them without repeating whole procedure?
[URL].......
Is it possible to Convert a Solid Work's file to Inventor?
(I can get the file to open, but when I go to edit there is no model to see, yet there is the model in the drop down menu and get this error message.)
Autodesk Inventor Translation Report18 July 2012 (10:15)Source File:C:UsersaxcliffDesktopP01-7064.SLDPRTTranslator Type:SolidWorksSending System:SolidWorksunknownAuthor: Translation Time:00:00:01OptionsImport Type:N/AEntity Types to Import:Solids, Surfaces, WiresImport into Repair Environment:YesImport Assembly as Single Part:NoCreate Surfaces As:Single Composite FeatureImport Multiple Solid Parts as Assembly:NoUnits: Check Parts during Load:NoAuto Stitch and Promote:NoEnable Advanced Healing:N/A
Components
The following table lists the parts and assemblies created in Inventor:
+/-Name Inventor File Status
[+]
I´d like to do something like that, convert a internal volume in a solid and delete the external solid.
[URL]
I need information on how to create a 3D Solid Model from wireframe and surfaces using AutoCAD 2013.
View 7 Replies View Related
