AutoCAD Inventor :: How To Convert 3D DWG Files To Solid Bodies
Jun 25, 2012How to convert 3d dwg files to solid bodies ?
View 6 Replies
ADVERTISEMENT
AutoCAD Inventor :: Convert Solid Into Thin Bodies
Oct 17, 2012I have a pressure vessel which I am trying to analyse. Whenever I convert the solid into 'thin bodies', it loses some of the data. For example, a fillet and a supporting ring (refer to pic attached). I haven't been able to find any 'shell element' settings to adjust.
Also, I need to manually add contacts otherwise the vessel seperates into multiple bodies.
Even though the solid model is in contact, the 'midsurface' shell seperates it. Refer to part file attached.
I briefly tried to run the analysis as a solid model, but gave up as it was taking forever just to mesh.
AutoCAD Inventor :: Using Make Components Feature To Convert Solid Bodies Into Parts
May 8, 2013I'm currently using the "Make components" feature to convert solid bodies into parts. This works great, but we use this method to construct angular roof structures, and after the parts have been made the parts have angular relationships to the .ipt files UCS co-ordinates. It would be very useful if I could align the longest edge of the part (Which is a timber truss) with the x axis in the model space and "lay" the plank flat on the X-Y plane.
View 4 Replies View RelatedAutoCad 3D :: Convert Some Solid Bodies To Single Solid?
Dec 1, 2006How can i convert some solid bodies to a single solid.
View 8 Replies View RelatedAutoCAD Inventor :: Split A Single Solid Body Into 2 Solid Bodies?
Sep 19, 2012I'm trying to split a single solid body into 2 solid bodies. The problem is that the body I'm trying to split consists of two separate pieces. I can split a body when it is a single piece no problem, but I'm having the problem when the two pieces are not joined at all.
When I try and split it on the origin plane it gives this error:
"Creating parting line failed. Could not build this Split"
When I try and split it on a work plane lying on one of the pieces it gives this error:
"Creating parting line failed. Modeling failure in ASM. Redefine inputs."
Or, another variation on this erorr:
"Creating parting line failed. Split feature could not create two bodies. Change the Split Tool so that split feature can create two bodies."
AutoCAD Inventor :: Combine Feature With Solid Bodies
Feb 20, 2013I have a model with solid bodies. I have used the combine feature to make cuts outs in some plates. The geometry is complex to model so Extrude cannot be used for cuts.
The body used for the combine can be at different angles and sizes. Due to this some of the combine features will not be needed or have no effect. This leads to the error message:
" The feature as specified did not change the number of faces (and may not have affected the part). Accept the feature that resulted, or use Edit Sketch or Edit Feature to change the feature definition." Is there anyway to suppress this feature automatically using i Logic?
AutoCAD Inventor :: Demote Solid Bodies To Sub Assemblies
Dec 5, 2012I have an assembly file for a fan casing. We reuse this model and scale it up and doen depending on the size of fan.
For transportation we split the caing into several parts and join using flanges. The number and angle of splits changes depending on the job and geometry.
To model this we share a sketch through the parts and use the split solid command to split them.
I would like to able to create sub assemblies from the main assembly so that drawings and masses can be obtained for the sub assemblies. However, the 'Demote' command does not allow you pick individual solids from a multi solid part.
I have tried creating new parts from the split solids but these are not in the correct location as they are not constrained correctly.
Is there a way to use the Demote command as I am proposing? or is there a different method to split my parts?
AutoCAD Inventor :: Edit Solid Bodies Color?
Sep 9, 2013Is it possible, via VB, to modify solidbodies color ?
Actually, I need to modify part color. But in some cases, the part color and the solidbody color are not the same. So I need to modify the Solidbody color, to match the part color.
I found the bodies in ComponentDefinition.SurfaceBodies, but I can't find something like ComponentDefinition.SurfaceBodies.Item(1).color.
AutoCAD Inventor :: Suppress Solid Bodies Using ILogic
Jan 15, 2013in addition to this question
[URL]......
What is the code for hiding different Solid Bodies:
with the User Parameter type, I want to select a certain type of Shackle and suppress / hide the other Solid Bodies.
AutoCAD Inventor :: Derived Weldment Changes To 2 Solid Bodies
Apr 24, 2012Open the attached file 207665-124.ipt. how their is only one Solid Body, but the iam needs to be updated because the user added one more part to the assembly. As soon as it updates now instead of one Solid Body I have 2. I don't want 2 and this is not typical. Even if I derive the 207665-120 into a brand new part file, it is only one body. What is causing this to seperate into 2 bodies? I tried to re-create this from scratch and can't, but he has several files like this that need updates and the 2 bodies causes problems with the holes.
View 1 Replies View RelatedAutoCAD Inventor :: How To Make Same Solid Bodies Around Another Body
May 24, 2013Is there a way to get that long tube and that rectangular part all around that middle circle.
[URL]........
Open this picture. In the end it would end up looking something like that lamp shade. I got one part down so is there a way to get a bunch of those around instead of redrawing it?
AutoCAD Inventor :: Split Multiple Solid Bodies
Oct 18, 2013I it possible to split multiple solid bodies. I'm finding that it only allows me to split one body at a time.
View 2 Replies View RelatedAutoCAD Inventor :: Suppression Of Solid Bodies In IPart
Jun 14, 2013Any way to suppress entire bodies in a multiple solid body part, using iPart, without having to suppress each individual feature for it. I am on Inventor 2013.
View 2 Replies View RelatedAutoCAD Inventor :: Apply Extrusion To All Solid Bodies All Of Time API
Mar 21, 2013I'm creating a template part to line the inside of a wall with wall boards. All the boards are drawn as an array of seperate solid bodies which are to be made into components once the windows and appertures have been extruded out.
The problem is when the wall changes to a shorter length and then back again. the solids are re-created and the extrusion e.g. Window1 does not have the new solids in it's effected solids list, so I get an error.
Is there a way to set the extrusions "effected solids" (Not sure if that's the correct term) to all the solids all the time through iLogic or the API?
AutoCAD Inventor :: Pattern Feature In Multiple Solid Bodies?
Sep 19, 2012I have a Hole that cuts through 2 solid bodies, a gasket and a cover plate. I want to pattern the hole in BOTH solids at the same time, but the pattern feature dialog box will only let me select one solid at a time. I could pattern the hole in one solid before projecting to the other, but the quantity of the holes can change. When the quantity of the holes changes only the holes from the initial pattern are projected. For instance if I have 10 hole initially and it increases to 12 the 2 new holes do not project to the second solid body.
Using Inventor 2013
AutoCAD Inventor :: Save Each Solid Bodies Created From Split?
Jul 24, 2013could we save each solid bodies created from split?
for example part1 part2?
image excerpt...
AutoCAD Inventor :: Assembly With Mixture Of Thin And Solid Bodies
Nov 14, 2013I'm trying to do a stress analysis on assembly with a mixture of thin bodies and solid bodies. The problem is that when I create the automatic contacts they are created as either all thin body or all solid body contacts. This of course causes the analysis to fail. It appears that there is no way to make a thin body contact become a solid body contact or vice versa.
I tried to run the entire thing as solid bodies but the I had to stop the analysis after 18 hours of continuous processing. (and a memory upgrade)
AutoCAD Inventor :: Invert Bodies To Make Hollow Part Solid
May 4, 2012So i draw a body (or assembly) and i would like to invert what i draw ( tubing for fluid flow) to be hollow and make the hollow part solid, is there any way that i could do that?
View 1 Replies View RelatedAutoCAD Inventor :: Convert Surface To Solid
Jan 28, 2010Is there any way to convert a surface to solid?
View 4 Replies View RelatedAutoCAD Inventor :: How To Convert 3D Scan To Solid Model
Nov 4, 2013I am working on a research project that requires that I scan a cast object and shell it out to a width of .125 inches. I used my school's 3D scanner to scan the cast, and I have a good model. I've made it a surface and exported it as an STP and an IGS into Inventor. I used the Sculpt feature to make it a solid object, but then I could not shell it because a few flaws in the cast made miniscule holes.
I then tried to use the scanning program's spline feature to cut the cast into splines to loft in Inventor. However, this made 5 non-connected lines at each location, so I couldn't loft. How to create a solid and then shell with either method?
AutoCAD Inventor :: Convert Solid Works File?
Jul 18, 2012Is it possible to Convert a Solid Work's file to Inventor?
(I can get the file to open, but when I go to edit there is no model to see, yet there is the model in the drop down menu and get this error message.)
Autodesk Inventor Translation Report18 July 2012 (10:15)Source File:C:UsersaxcliffDesktopP01-7064.SLDPRTTranslator Type:SolidWorksSending System:SolidWorksunknownAuthor: Translation Time:00:00:01OptionsImport Type:N/AEntity Types to Import:Solids, Surfaces, WiresImport into Repair Environment:YesImport Assembly as Single Part:NoCreate Surfaces As:Single Composite FeatureImport Multiple Solid Parts as Assembly:NoUnits: Check Parts during Load:NoAuto Stitch and Promote:NoEnable Advanced Healing:N/A
Components
The following table lists the parts and assemblies created in Inventor:
+/-Name Inventor File Status
[+]
AutoCAD Inventor :: Convert Internal Volume In A Solid?
Dec 17, 2011I´d like to do something like that, convert a internal volume in a solid and delete the external solid.
[URL]
AutoCAD Inventor :: IGES Import - Convert To Solid Part
Jul 19, 2012Two IGES parts and try to convert them to a solid. I've tried all I can think of with no good result.
I can't get them uploaded, file is too large, what can I do?
AutoCAD Civil 3D :: Import 3D As Solid Objects Or Convert Polymesh To Solid
Jun 18, 2013I have a.3ds file imported into Civil 3d. The object imported as a polymesh in Civil 3d. I need the solid 3d object to do some edit like slice or union and subtract.
The question is "How can I import .3ds into Civil 3d as a solid objects or hoe can i convert polymesh to solid?"
AutoCAD Inventor :: Convert Surface Model Pump To Solid Model?
Oct 4, 2011Am trying to convert this pump into solid ?
View 6 Replies View RelatedAutoCAD Inventor :: Convert Surface Model Into Solid Model?
Jan 15, 2013My problem today is that I made a Model of a Part of a ship using surfaces rather than solids because the engineer thought it would be easier to bring into ANSYS program for analysis but he is now having a problem with it and I am looking into converting my current model to solid. I can do it but the method I thought of using is quite long winded and we are working to a tight deadline.
1.open up the surface part
2.use "Offset/Thicken"
3.any clashes between parts make a sketch and cut away.
the problem is the amount of plates I have and the time it takes to sort them out.
AutoCAD Inventor :: How To Convert Surface Body In Solid Body
Mar 8, 2012How can I convert a surface body in a solid body?
I attach my file.
AutoCAD Inventor :: Importing Solid Edge Files?
May 26, 2013I have recently purchasedAutocad Premium Design Suite and am surprised tofind that Solid Edge files like.par,.dft, .asm,.psm cannot be opened directly in Inventor Fusion. I was told by the reseller that "I have to convert the files into Parasolid or IGES or Sat formats and then the same canbe opened in Inventor Fusion." This is rediculous as the Inventor Fusion claims that " You can open files from any CAD system directly". This is clearly misguiding. know the correct procedure for data transfer?
View 9 Replies View RelatedAutoCAD Inventor :: Import Template Files To Solid Works
Feb 14, 2012I have created Template drawing files of D Size, C Size, B Size with defined title blocks and dwg sheet information on it. These template files i want to used in 2011 Solid Works . I don't want to again create the Title Blocks , Border layout and Sheet information for Solid Works. How can i import or make use of ready templates created in Inventor to Solid Works. ?
View 1 Replies View RelatedAutoCAD Inventor :: Unable To Open Solid Work Files
Jul 11, 2012why am i not able to open solid work files? The files were made in 2008 in solid work. I ma trying to open them in 2011 INV. I am also checking the box as showing the attachment.
There is a option to open solid work *asm* files. why it is not working?
AutoCAD Inventor :: Solid Works - Converting DWG Files To Mesh (OBJ / PLY Or STL)
Nov 19, 2013I have some DWG files which contain walls of old castle some of the vertex are missing so I have to join them manually or found software to generate them automatically Does solid works have this functionality ?
After joining vertex how can I convert walls to meshes?