Then I need to extrude it, but when I extrude, it's shallow. So this 2D polygon need to have face. I've tried 3DFACE but then I need to add faces manually. Is there any way to just specify this polygon and have it faced?
View 9 RepliesIs there a setting for extruding polygons so it doesnt leave the original polygon.
When i extrude a polygon into a 3D solid, it extrudes fine but it also keeps the original polygon which means i have to delete it?
I need information on how to create a 3D Solid Model from wireframe and surfaces using AutoCAD 2013.
View 7 Replies View RelatedI have a set of 8 coordinates that outline a pit. I have been asked to calculate it's volume. I have input the coordinates, and have produced a 3D image of the pit. I was hoping to be able to convert the object (the pit) that I have created to a solid, so I could then determine the volume, although it is proving to be difficult.
how I could calculate the volume of this pit?
Making a hex head bolt. draw a 6 sides polygon. turn it into a region. extrude it a little bit. Then how do can you put a simple chamfer on one end?
View 7 Replies View RelatedI have a.3ds file imported into Civil 3d. The object imported as a polymesh in Civil 3d. I need the solid 3d object to do some edit like slice or union and subtract.
The question is "How can I import .3ds into Civil 3d as a solid objects or hoe can i convert polymesh to solid?"
It is possible to export only the surface of a solid in the form of a polygon for arcmap?
View 2 Replies View RelatedHow can i convert some solid bodies to a single solid.
View 8 Replies View RelatedI drew a solid model of a structure in Autocad 2010. By using that model, I want to make a FEM analysis in Sap2000. The problem is that Sap2000 takes only polygon meshes (not solids) in 3d. The question is that how can i make a group of polygon meshes of the solid model that represents the structure.
(Since i am not an expert of Autocad, i will be glad if the solution is explained in a simple language.)
I've MAP 3D 2013 64 bit (French version) with SP1.
When I launch command to "Convert polyline to polygon" (_MapPolylineToPolygon), I've message on command line "Select objetcs", I can convert to polygon =>OK
If I launched this command a second time, I've no possibility to select object, I come back to command line.I quit MAP, then launch MAP, and I can use this command only 1 time.
This problem appears after SP1 was applied.
How do i convert a series of polylines to one closed polygon (so i can calculate an area, hatch it, etc)?
View 3 Replies View RelatedGoal of the task : I need the area of different type of soil. I have an image of these different soil, but I need to create a polygon manualy for each and every one of these. This is to calculate the runoff coefficient of a watershed.
As they are different by their colors (blue = lake, green = forest, etc), I would like to know if it is possible to convert these image to have an polygon usable in autocad, where I can calculate the area of each type of cover.
I have finally created the shell of the complex surface that you see. This is only a section of the part because I cannot show the whole thing for proprietary reasons. I formed solid surfaces using the network command. The propblem is that it will not convert to a solid because the surface seams are not "water tight." When the network command created the solid surfaces, the surface seams do not exactly match the lines so there are gaps in all the seams. I have tried blending, patching, etc. and nothing works. how to convert this to a solid without losing the outlines and the shape?
View 3 Replies View RelatedIs it possible to trim a 3d solid using another 3d solid as a cutting edge? I want to cut the edges of a dam using the natural ground surface (which is also a solid) as my cutting edge.
View 3 Replies View Relatedi am having a hatching issue, it seems no matter what hatch pattern i use and what hatch scale, alot of the hatch looks solid instead of the pattern i want, for example i am using currently ANSI37 @ Annotative with a scale of .20 and on the same paperspace page one plan with the hatch shows the cross hatching and the other one below looks solid (see attached) now i can go and say change the hatch scale and it reverts to the cross hatching, but then when i zoom out it goes back to "solid" is it a graphical issue?
View 7 Replies View RelatedCurrently when I pick a grip at the end of a polygon line and type a length, the polygon goes to that length.
Is there a setting anywhere that changes this behavior to add the typed length to the polygon, hence stretching it to this new length. This would be the same as lengthen when drawing with lines.
When I am trying to dimension a room in AutoCAD 2014 the dimension looks like a solid rectangle, with no text. I am dring in Architectual mode using the default template.
View 4 Replies View RelatedI have an existing polygon, I'd want to select it and :
1.- Delete all inside it
2,. Delete all outside of it
Both actions with an option to include points of cut objects.
Civil 3D (2013)
I'm trying to import an autocad file into sap2000. The element i need to import has to be a solid. I know that sap2000 accepts elements called polygon mesh (i received a test file, and under properties of the object, that is what is said).
how to make a polygon mesh? what is the function called? I've tried MESH but i don't think its the same thing.
I have this chair in 3d but it consists of 3d faces and i can not convert all of them into surfaces or solids...only the faces that are on the same plane can be converted. Since the object is a little curved...i get the message"faces are not coplanar"...or something.
View 9 Replies View RelatedI have some objects in AutoCAD Architecture that I need to convert from polymesh to solid. How to do this? I also have Revit Architecture if I can do it in there..
The objects are 3D light fixtures on a 2D floorplan. Can I export the whole drawing as one to convert it?
I have some objects in AutoCAD Architecture that I need to convert from polymesh to solid. I also have Revit Architecture if I can do it in there..
The objects are 3D light fixtures on a 2D floorplan. Can I export the whole drawing as one to convert it?
Is it possible to convert surface into solid in AutoCAD 2002?
For example, can I convert these five surfaces into a solid pyramid?
If yes, what is the step to do it?
Is there any way to convert a surface to solid?
View 4 Replies View RelatedSupposedly there's a way "To Convert One or More Surfaces to Solids":
[URL]
However, I'm unable to find Home tabSolid Editing panelThicken.
I'm trying to take LIDAR/Point Cloud data and 3D print it (in the end, I need to make an STL file). I've created a 3D surface from Point Cloud data which results in a Raster Layer. I do not know how to convert the surface that's in the Raster Layer into a solid.
i have recived an igs fle which i imported into auticad 2012.when imported the and saved as an .dwg the model is in surfaces, im looking to convert the surface to solid so i can export the file as an .stl for 3d printing. is it possible to convert this?
View 7 Replies View RelatedI want to convert a complex object into solid, so that I can measure its volume.
View 9 Replies View RelatedI'm creating an iPhone 4 case so it has a logo on it for my teacher. I got the case from thiniverse. It was a polyface mesh. i tried to subtract from it but it didn't work. I tried convtosolid but it didnt work. I exploded them and selected the outside shell and extruded all of the objects inward. Then when i tried to union them together, some of them would union, but not all of them together. im trying to export it as a .stl so I can use it with a 3D printer...
I'm using AutoCAD 2010 Educational version.
I tried to convert the cone surface which is created by revolving line, to solid, but always fail. how to convert it? (Autocad 2013)
View 9 Replies View RelatedIs there a "simple" way to convert a 2d immage (photoshop file) to a 3d solid?
Basically I have a 2D image (a discus of sorts) that has geometrical shapes "cut out of it" (Imagine a circle with a triangle "missing" inside) and I'd like to create a evenly high discus with a triangle hole in it).. Let's say a coin that misses a triangle in it's mid.
Clearly I could draw a circle (surface) extrude it, then create a triangle (surface) and extrude that one and subtract one from the other, but since the image I have is a bit more complex I just wanted to know if there is a quicker/easier way.
Also I have a text in my discus, and drawing a text surface in AutoCAD is not really easy.
How to convert 3d dwg files to solid bodies ?
View 6 Replies View Related