Currently when I pick a grip at the end of a polygon line and type a length, the polygon goes to that length.
Is there a setting anywhere that changes this behavior to add the typed length to the polygon, hence stretching it to this new length. This would be the same as lengthen when drawing with lines.
Is there a setting for extruding polygons so it doesnt leave the original polygon.
When i extrude a polygon into a 3D solid, it extrudes fine but it also keeps the original polygon which means i have to delete it?
I am making a wheel but my tire is too short so that i need to stretch or adjust the lenght of my tire how can i adjut so that my tire can settle the remaining of my rim.
View 9 Replies View RelatedMy firm worked on a project recently with a sheet numbering system that created long sheet numbers, ie, MH-101-R1. Since the sheet numbers were so long, they no longer fit in our normal sheet/detail/drawing label blocks. (See attached DWG for an example.)
We are looking to create either a dynamic block or some kind of block that will automatically stretch with the text length.
Attachment here.
I've got to create a dynamic block for Rebar, with symbols (which are blocks) at two end of the bar line can be changed scale follow annotation scale changes.
The problem is after I have stretch the linear grip to change the length of the rebar, if I change to another annotation scale, the sybol block auto jump to the original position, not at the ends of line as I expected. How to keep the symbols at ends?
I use dynamic blocks a lot of the time and most of them have a stretch action in them. What used to happen would be that whenever I clicked on the block I wanted to adjust and then clicked on the stretch action, it would show the distance from the base point and I was able to type in the new length of the object I was stretching. But now whenever I click on the stretch action, it shows that the current length is 0 and it is asking for the distance from the current point, not the base point. How can I change it so that it is always just the distance from the base point?
View 7 Replies View Relatedis there a way to associate a stretch action with the length of an attribute value (i.e. # of characters in the string) or is this something left to vlisp?
View 1 Replies View RelatedOkay, I'm new to associative arrays, I'm attaching a drawing so you can see what I'm trying to accomplish with this. I'm doing an elevation view of a slab that has a cross section of the rebar. I've shown one of the bars spanning from left to right, represented by a rectangle, and the cross section of the bars running front to back represented by circles. You can see what I'm trying to show here. In the drawing I've attached, the top three sketches are examples of how this would look if it were working correctly.
What I'm trying to do is create an array (of circles) that will stretch to the length of the bar spanning left to right. I want the quantity of items in the array to automatically change based on the length of the bar and the spacing of items, so if there is 6" of spacing between the items instead of 12" it will automatically add twice the amount of items to fill in that space. I've been trying to use a path array, and it isn't working the way I want. I'm not familiar with rectangular arrays, so not sure what to do there either.
I have a contractor that created several families for us, and they left all the ref. planes full length, and I what them nearer to the objects. When I open the family all I see is ref. planes, I need to see them, I just want the closer to the parts not stick extremely far away. I can pick them one at a time, but sure would be nice to grab them at once.
View 4 Replies View RelatedThen I need to extrude it, but when I extrude, it's shallow. So this 2D polygon need to have face. I've tried 3DFACE but then I need to add faces manually. Is there any way to just specify this polygon and have it faced?
View 9 Replies View RelatedWhen I am trying to dimension a room in AutoCAD 2014 the dimension looks like a solid rectangle, with no text. I am dring in Architectual mode using the default template.
View 4 Replies View RelatedI have an existing polygon, I'd want to select it and :
1.- Delete all inside it
2,. Delete all outside of it
Both actions with an option to include points of cut objects.
Civil 3D (2013)
I'm trying to import an autocad file into sap2000. The element i need to import has to be a solid. I know that sap2000 accepts elements called polygon mesh (i received a test file, and under properties of the object, that is what is said).
how to make a polygon mesh? what is the function called? I've tried MESH but i don't think its the same thing.
Prior to 2013 I have been able to stretch wipeouts - it seems that this command no longer works!! Is there system variable that needs to be altered? or have Autodesk simply removed the functionality??
View 9 Replies View RelatedJust upgraded from 2012 to 2013.....Why did they change the way you stretch a wall with grips???? Now, I cannot align a wall perpendicular to the inside of another wall, only the outside edge/face....Is there a fix or setting I am not aware of?
View 1 Replies View RelatedWhen trying to stretch of move a line in AutoCAD using the grips, it will move additional lines that are touching. It does not do this for every line in the DWG. It seems to be random. They are not grouped. What could be the problem.
View 3 Replies View RelatedVoorstel spantenlijn.dwg
I have created a dynamic block. Herein I placed stretch actions parameter set to strecht parts including anotative text.
Now the block seems to work fine.
- When I am in modelspace and I change the annotation scale the text is changed correct
- When I am in modelspace and I change the stretch value of the dynamic block everything goes fine.
But when I am in modelspace and I change the stretch value in one of the annotiaton scales and then switch to another scale my text is changed annotativly (this is what I want) but the stretch value is set back to default (which should be at the changed value).
I use the right mouse click command as my enter. But for the past couple of days when I try to use the move, copy, stretch commands, everytime I go to select a base point - autocad selects the point and then automatically snaps or displaces to a random point off of the screen. I don't know if this has something to do with the right mouse click or not, but I can't figure out why it keeps snapping off screen. If I switch and use the enter key or space bar as enter the problem goes away.
examples:
Command: s STRETCH
Select objects to stretch by crossing-window or crossing-polygon...
Select objects: Specify opposite corner: 13 found
Select objects:
Specify base point or [Displacement] <Displacement>:
Specify displacement <0'-0", 0'-0", 0'-0">:
Command: m MOVE
Select objects: Specify opposite corner: 43 found
Select objects: Specify opposite corner: 27 found (14 duplicate), 56 total
Select objects: Specify opposite corner: 18 found (14 duplicate), 60 total
Select objects: Specify opposite corner: 14 found (4 duplicate), 70 total
Select objects:
Specify base point or [Displacement] <Displacement>:
Specify displacement <0'-0", 0'-0", 0'-0">:
I have used AutoCad for a few years and I installed 2013 to my laptop recently.I noticed that I couldn't specify how long a line should be. When I select the line tool and specify the base point and type how long it should be i.e. 3' and a red box appears around the dimension box and the line isn't drawn. I tried not specifying a unit of length and it draws the line just fine. But for some reason it wont complete the line if I specify feet or inches.
View 2 Replies View RelatedIn previous versions of autocad after I select a line, and put the mouse pointer over a vertex, there would be an on screen number displaying the length of the line. In Autocad 2013 this seems to have disappeared. how to get it back?
View 2 Replies View RelatedI have a drawing and I have a field calling up the path and file name. Is their a way to limit the size of the path displayed? For example, if my drawing is C:users
ame1
ame2
ame3 4
ew5.dwg, is their a way to only show ...
ame3 4
ew5.dwg?
I am trying to dimension a line that is not parallel to either they x or y axis. When i try to demsion the line it will only let me dimension the vertical or horizonal component and not the diagonal length. I have included a picture of what I am reffering to.
View 2 Replies View RelatedIs there any easy way to get the total length of selected lines (even if they are not "connected") ?
View 6 Replies View RelatedHow can I take and display the lenght and the radius of all elements in my DWG.
View 3 Replies View Related The cells of the table don’t respond to the chosen height/length
1.I’m wondering why the cells of the table don’t respond as a particular value is typed for them.
2.Also, If all cells are selected to be given a particular height/width then they don’t respond as well.
3.Originally, the inserted table doesn’t respect the value of width assigned for it!
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
my problem is whenever i make a new block a stretch point appears even if its not a dynamic block . also its not a stretch point, because when i click on it, it just move the block , and it always appear on the coordinates 0,0 it cause me a problem when I insert the block , autocad use this point as a base point , and its very far from the real block .
View 1 Replies View RelatedIs it possible to change the length of a line based on the length of an attribute?
I'd like to make the line a MINIMUM length of X" (I haven't decided how long yet--but know I'll need a minimum). But then after the user fills in the attribute, I'd like the length of the line to change to the length of the attribute plus a small amount (again, I haven't decided yet how much extra).
I was wondering if there is a way with DB's to have a line "follow" or "grow" with the content/value length of an attribute. Maybe some method of linking the attribute width to length of the line? Essentially, it would work just like turning on the underline setting when typing in mtext editor (or any program with an underline option for that matter), expect that the line could be placed anywhere, and would not have to reside directly below the text.
View 5 Replies View RelatedCommand to make a line change length to match length of a line, arc, polyline or circle? Could use this when making flat patterns layouts.
View 5 Replies View RelatedWith using superelevation wizard in Civil 3d 2012, changing the lane width is not affecting the resulted values of transion length and run-off length, Is that correct ? ( as civil is using standerd AASHTO tables which assume that lane width typically is 3.6m )
Also, There is only 2 tables for 2-lanes and 4-lanes roadway, Is it for total road width or for one directon only, and what about different no. of lanes ?
I am creating a block with attributes for a standard job. I have (4) total attributes in this block (for example: panel type, qty, length in imperial, length in mertic)
I would like my length in metric attribute to automatically populate based on the input from length in imperial.
Is this possible?