AutoCAD Dynamic Blocks :: Line Length Follow Content Length Of Attribute
Mar 16, 2012
I was wondering if there is a way with DB's to have a line "follow" or "grow" with the content/value length of an attribute. Maybe some method of linking the attribute width to length of the line? Essentially, it would work just like turning on the underline setting when typing in mtext editor (or any program with an underline option for that matter), expect that the line could be placed anywhere, and would not have to reside directly below the text.
View 5 Replies
ADVERTISEMENT
Jan 8, 2013
Is it possible to change the length of a line based on the length of an attribute?
I'd like to make the line a MINIMUM length of X" (I haven't decided how long yet--but know I'll need a minimum). But then after the user fills in the attribute, I'd like the length of the line to change to the length of the attribute plus a small amount (again, I haven't decided yet how much extra).
View 3 Replies
View Related
Jun 23, 2011
is there a way to associate a stretch action with the length of an attribute value (i.e. # of characters in the string) or is this something left to vlisp?
View 1 Replies
View Related
Nov 22, 2012
In the attached block, how can I contraints the red line to follow the end of the attribute text?
View 3 Replies
View Related
May 29, 2013
I'm trying to create a pline in a dynamic block where the length is determined by two values I would input into properties or as attributes.
The first value 'A' will be a ground surface elevation
The second value 'B' will be a ground water elevation
I would like to the pline to have a length of A minus B.
I would then also like to have mtext (or any other method of display text) to display the values of A and B.
For example, if I have a ground surface of 102 and a ground water of 91, my line length will be 11, and I can display a label of '102' at the top of the line and '91' at the bottom of the line.
I've created dynamic blocks before, but none that have used an expression of two values or having to display inputted values. I'm not really sure where to start with this, or if it's even possible.
View 7 Replies
View Related
Jan 24, 2012
I am creating a block with attributes for a standard job. I have (4) total attributes in this block (for example: panel type, qty, length in imperial, length in mertic)
I would like my length in metric attribute to automatically populate based on the input from length in imperial.
Is this possible?
View 1 Replies
View Related
Sep 18, 2011
I have a rectangle, it has an attribute called "WIDTH". Also it has a parameter for width of the rectangle. When I change the attribute (insert a block and define it) the width of the rectangle changes.
View 0 Replies
View Related
Sep 30, 2013
Change the 24 x 24 x 12 MLeader in this Block to Fields that read the length of the Lines that the Distance1 and Distance2 Parameters are attached to and tell me if it crashes? And if it does not crash, post a working DynBlk.
View 3 Replies
View Related
Jan 4, 2012
-you have a dynamic block with a grip that allows for any adjustable length.
-assume i need a the block to be 500mm long
-i stretch the block 500mm long in CAD (but it is still dynamic and will let me grip the length and adjust).
-after I insert it and set the 500mm length, can I somehow LOCK THE 500 LENGTH, so you cannot grip and edit the length anymore???? (but also have an unlock function for later)
This would be very useful in the following situation: Doing elevation view of a building with wall connections between floors....There would be MANY of these dynamic blocks....But they should all be the same length, per floor...But the next floor may have a different length....So I want to be able to Set Length > then lock in place... (and be able to unlock whichever I want, and adjust appropriately where the connection gets longer/shorter at another location...)
View 8 Replies
View Related
Sep 30, 2013
Is there any simple code for to sum length of lines which is i am choosing and copying result to chosen attribute tag ?
View 1 Replies
View Related
Jan 10, 2014
I created a dynamic block with text field that show the lenght of a line, but this line can be 0 and in that case I want that the text field will show nothing instead of "0".
I try to write it in diesel expression with if command but i don't know how to bring the object lenght into the diesel expression code.
View 4 Replies
View Related
Jan 4, 2012
in order to streamline some of my duties i wonder if theres a way to have a dynamic block not only that can change it's length and the dimension for that length (easy) but will also add features to the part. For example can one be made that when stretching its length that once it reaches a certain length automatically split into two sections and keep those 2 sections equal? Also can it be made to contain a tag that keeps track of the lengths as well as number of joints between sections multiplied by a constant?
View 1 Replies
View Related
Jan 11, 2013
I'm trying to create a dynamic block for a slotted hole, where I can specify and vary the width and length independatly.
To add complications, I also want the centrelines to stretch accordingly.
I've made some progress, it's 75% there, however certain combinations seem to 'break' the block.
ACad, MEP, 3DS Max
Windows 7x64
X5482 @3.2Ghz 8Gb Ram
Quadro FX1700
View 6 Replies
View Related
Apr 26, 2012
We have a title block wherein the Location attribute is normally a single line, but occasionally is two or more lines. Within the title block this attribute is surrounded by lines, left, right, top, bottom.
We would like the bottom line to move down when the user adds additional lines to the attribute.
View 1 Replies
View Related
May 24, 2002
Command to make a line change length to match length of a line, arc, polyline or circle? Could use this when making flat patterns layouts.
View 5 Replies
View Related
May 11, 2013
With using superelevation wizard in Civil 3d 2012, changing the lane width is not affecting the resulted values of transion length and run-off length, Is that correct ? ( as civil is using standerd AASHTO tables which assume that lane width typically is 3.6m )
Also, There is only 2 tables for 2-lanes and 4-lanes roadway, Is it for total road width or for one directon only, and what about different no. of lanes ?
View 2 Replies
View Related
May 22, 2013
I'm not sure if this has been answered yet but I'm customizing my content center and Im wondering can I change the {B_L} to show feet with inches and fractions
Just like you can in BOM for quanity
"AISC HSS" & " - " & {G_D} & " - " & {B_L}
View 4 Replies
View Related
Jan 17, 2013
This would be for standard, not custom cc parts. I read that you can save a cc part file as a template with the G_L parameter set as fractions, and then use it to replace the family template in cc, but that doesn't work (or I'm doing it wrong). It worked once, then stopped? I know there has to be a way of doing this.
I tried exporting values from cc as custom iProps, then tried to populate description iProp with these, but that doesn't work.
View 9 Replies
View Related
Dec 16, 2011
I have authored a part to the Content Center, but the part is inserted at a standardized length. How do I author the part so that the length can be specified whem inserted, like the structural steel shapes?
View 3 Replies
View Related
Nov 21, 2011
I wish to create a dynamic block containing some attributes. These attributes are inside rectangles that can't be modified in length using linear parameters ; but the attribute has to be always in the middle of the rectangle. So, I draw a line inside the rectangle (in a hidden layer) and insert the attribute with center justification (not sure for the translation) that I place in the middle of this line ; then I put a coincidence constraint (not sure for the translation, but it's the first one) linking the middle of the line with the middle of the attribute.
But here's the problem : when stretching my rectangle, the insertion point of the attribute suddenly changes from "center" to "bottom left".
View 2 Replies
View Related
Dec 4, 2013
I am looking for a way to use the ATTIN/ATTOUT workflow to bring in data from an excel spreadsheet to drive the size of each of my block's instances. The block will be simple, a rectangle, with width and length parameters. For each entity in my excel/csv file these parameter values are spelled out. I know how to display these parameters in my attributes, but I don't know how, if I were to feed in these values, to drive the geometry. If there's a better way to take a list of width and length values to generate a series of blocks each with a rectangle containing its respective size.
View 1 Replies
View Related
Oct 27, 2009
I have been practicing using a older book(copyright 1990) and it has some decent exercises in it. I was able to do this one but it seems I can"t find the proper way to do this..First drawing a line a certain distance..ortho on,click the first point anywhere,move curser to the left and click again. that gives me a line at 180 degrees at what ever length..Line command again starting at the second point of the first line..after clicking that point,I type in @2.38<150 that gives me a line2.38 long at 150 degrees..now how do i make a third line relative to the second line so that the angle is 75 degrees and a certain length..the picture shows what I am trying to draw..using the polar cordinates you get an angle based off the UCS( which is set at world) when you try to draw the third line ..that makes the angle between line 2 an 3 not the angle that I want..To make the drawing,I rotated the ucs -30 degrees..But there has to be a better way than that..
View 9 Replies
View Related
May 2, 2011
My firm worked on a project recently with a sheet numbering system that created long sheet numbers, ie, MH-101-R1. Since the sheet numbers were so long, they no longer fit in our normal sheet/detail/drawing label blocks. (See attached DWG for an example.)
We are looking to create either a dynamic block or some kind of block that will automatically stretch with the text length.
View 4 Replies
View Related
Nov 24, 2011
This is my first time using Inventor but I've been using ProE for several years in school. A friend of mine told me about a feature in ProE where you are able to define a part and then define one of the lengths as it is placed into an assembly. For example I would define a 2x4 part with a length of 84inches. If I wanted a 2x4 of 68inches in my assembly I would use the same file but simply change the 84 to 68. How can I do this with Inventor?
View 1 Replies
View Related
Aug 25, 2011
I use dynamic blocks a lot of the time and most of them have a stretch action in them. What used to happen would be that whenever I clicked on the block I wanted to adjust and then clicked on the stretch action, it would show the distance from the base point and I was able to type in the new length of the object I was stretching. But now whenever I click on the stretch action, it shows that the current length is 0 and it is asking for the distance from the current point, not the base point. How can I change it so that it is always just the distance from the base point?
View 7 Replies
View Related
May 18, 2013
I am using AutoCad Architecture 2011 and I am in the midst of creating a simple line drawing of a bifold door. I have two lines. Each at opposing 45 degree angles. The objective is to have each line segment equal to half the distance measured between two points. For example; if the door opening is 2' wide each line of the bifold doors should be 1' in length if measured diagonally. The result would be a line, if stretched out, would equal 2'.
I've created a block that can stretch and rotate but I just can't figure out the height to length ratio thing.
View 8 Replies
View Related
Jan 24, 2012
I have the same block repeated multiple times in a drawing, and I want to delete the last attribute in all of the specific blocks. When I edit the block in block editor, the attributes do not show up. After I explode the block, there is no text. The attached image shows the properties of the block.
View 9 Replies
View Related
Mar 15, 2013
A coworker brought this to my attention and I was also immediately able to reproduce this. We use content center C channels and other common beams a lot. After inserting one into an assembly if you right click and select change size and edit the length it typically doesn't update to the correct length.
Example:
Insert a 10" Ansi MC/C channel any size
right click and select change size
add +.0625 to the existing length and hit apply
measure it at 10.06252 in
repeat change size and type in 10.0625
measure it at 10.0625
repeat change size and type in 10 + .0625
and measure at 10.06252 in
It seems to mess up more when you do math but it also screws up entering a simple number
10.000325 usually ends up as 10.000315 in for me.
Editing the part directly from it's parameter dialog doesn't yield anything like this.
View 9 Replies
View Related
Jun 13, 2013
I have used AutoCad for a few years and I installed 2013 to my laptop recently.I noticed that I couldn't specify how long a line should be. When I select the line tool and specify the base point and type how long it should be i.e. 3' and a red box appears around the dimension box and the line isn't drawn. I tried not specifying a unit of length and it draws the line just fine. But for some reason it wont complete the line if I specify feet or inches.
View 2 Replies
View Related
Dec 2, 2011
Dim acDoc As Document = Application.DocumentManager.MdiActiveDocument
Dim acCurDb As Database = acDoc.Database
ed = acDoc.Editor
[Code]....
I need to get the line object length. i Have written the below code.
If i use area property i am getting zero.
View 3 Replies
View Related
Dec 9, 2011
I'm having a problem entering line lengths - something I remember occurring some time ago - but I can't' recall how I remedied it. The '@' symbol take time to register - instead of registering immediately as previously. I now have to check the command line each time and allow a moment for it to register before entering the values.
View 4 Replies
View Related
