I am creating a block with attributes for a standard job. I have (4) total attributes in this block (for example: panel type, qty, length in imperial, length in mertic)
I would like my length in metric attribute to automatically populate based on the input from length in imperial.
Is this possible?
Is it possible to change the length of a line based on the length of an attribute?
I'd like to make the line a MINIMUM length of X" (I haven't decided how long yet--but know I'll need a minimum). But then after the user fills in the attribute, I'd like the length of the line to change to the length of the attribute plus a small amount (again, I haven't decided yet how much extra).
I'm trying to create a pline in a dynamic block where the length is determined by two values I would input into properties or as attributes.
The first value 'A' will be a ground surface elevation
The second value 'B' will be a ground water elevation
I would like to the pline to have a length of A minus B.
I would then also like to have mtext (or any other method of display text) to display the values of A and B.
For example, if I have a ground surface of 102 and a ground water of 91, my line length will be 11, and I can display a label of '102' at the top of the line and '91' at the bottom of the line.
I've created dynamic blocks before, but none that have used an expression of two values or having to display inputted values. I'm not really sure where to start with this, or if it's even possible.
I was wondering if there is a way with DB's to have a line "follow" or "grow" with the content/value length of an attribute. Maybe some method of linking the attribute width to length of the line? Essentially, it would work just like turning on the underline setting when typing in mtext editor (or any program with an underline option for that matter), expect that the line could be placed anywhere, and would not have to reside directly below the text.
View 5 Replies View RelatedTo convert from imperial to metric multiply the length, in inches, by 25.4 (the number of millimeters per inch).
Example: 3 inches converted to millimeters is 3*25.4 or 76.2mm.
To convert from metric to imperial multiply the length, in millimeters, by 0.03937 (the number of inches in a millimeter). For greater accuracy use 0.03937008.
Example: 100 millimeters converted to inches is 100*0.03937 or 3.937 inches.
My firm worked on a project recently with a sheet numbering system that created long sheet numbers, ie, MH-101-R1. Since the sheet numbers were so long, they no longer fit in our normal sheet/detail/drawing label blocks. (See attached DWG for an example.)
We are looking to create either a dynamic block or some kind of block that will automatically stretch with the text length.
Command to make a line change length to match length of a line, arc, polyline or circle? Could use this when making flat patterns layouts.
View 5 Replies View RelatedWith using superelevation wizard in Civil 3d 2012, changing the lane width is not affecting the resulted values of transion length and run-off length, Is that correct ? ( as civil is using standerd AASHTO tables which assume that lane width typically is 3.6m )
Also, There is only 2 tables for 2-lanes and 4-lanes roadway, Is it for total road width or for one directon only, and what about different no. of lanes ?
in order to streamline some of my duties i wonder if theres a way to have a dynamic block not only that can change it's length and the dimension for that length (easy) but will also add features to the part. For example can one be made that when stretching its length that once it reaches a certain length automatically split into two sections and keep those 2 sections equal? Also can it be made to contain a tag that keeps track of the lengths as well as number of joints between sections multiplied by a constant?
View 1 Replies View RelatedI am working for Post-tensioning company.I have a tendon layout drawing.May I know how to indicate the tendon length automatically?
View 5 Replies View RelatedI have a rectangle, it has an attribute called "WIDTH". Also it has a parameter for width of the rectangle. When I change the attribute (insert a block and define it) the width of the rectangle changes.
View 0 Replies View RelatedWe design with a lot of tubing and pipe. Is there a way to add a custom property to the BOM that will automatically show the extruded length of, say, a length of pipe or tube? Also, is there a way to automatically calculate the total length of all tubing of a given size?
AutoCAD 2013
Inventor 2013
Windows Pro 7 x64
Asus Sabertooth X58
Intel Core i7 960 @ 3.2 GHz
24 GB ram
I build frames with various lengths of square and rectangular structural tube. All of my tubing members are generated from a custom iPart factory. When I insert a tube into my assembly, I key in the required length and the tube is generated. I would like to be able to automatically display the length of the member in a custom field in the parts list.
View 1 Replies View RelatedIs there any simple code for to sum length of lines which is i am choosing and copying result to chosen attribute tag ?
View 1 Replies View RelatedI have several placeholders where I have added keyframes for instance opacity fade up and down at the beginning and ending of the layer. If I replace it and the video is longer/shorter than the placeholder then the keyframes will not adjust. Is there some way to have keyframes move dynamically based on the video length? I looked into expressions to calculate the start and end time of the layer then fade in and fade out using the time but it was quite time consuming and inefficient, it would also be hard to write new code for say position versus have dynamic keyframes.
View 2 Replies View Relatedis there a way to associate a stretch action with the length of an attribute value (i.e. # of characters in the string) or is this something left to vlisp?
View 1 Replies View RelatedI'm trying to finally utilize iLogic and all of its functionality (after using the basic features of inventor for the past 3 or so years) and I was wondering if there was a way to use iLogic (or some other feature for inventor) to resize text in a title block field of an IDW based on the length of the text entered (i.e. if the part's name was "Cam Retainer" the text height would be .12, but if its part name was "Spacer Cam Retainer Bushing" the text height would shrink down to .085 or something) so that it would still fit nicely into the text block?
View 3 Replies View RelatedHow do you change the dimension units from default decimal to feet and inches with ACLT 2013?
View 4 Replies View RelatedI have one problem like conversion in this project involving things are converting total imperial dimensions in to metric while converting all the dimensions required in single precision like 15/16'' as .9375 mm but he need approximate value like 1 . I have large assembly how to maintain over all dimensions and how to change internal dimensions in simple ways.
View 6 Replies View RelatedWe use Civil 2012.Under Drawing Utilities>Drawing Settings we change International Foot to US Survey Foot. The problem is this setting appears to be per drawing. Is there a way to set it up to remember this setting....system variable I can set in the acadoclisp?
View 5 Replies View RelatedWhen in a drawing how do you switch between Imperial and Metric. It seems like it would be such a simple process? When I try to go to Options > User Preferences > Scale List Edit and change it, I then hit apply get back into options and it is switched back to Imperial ? I am basically trying to get this scale list format 1:10, 1:20, etc. instead of 1/4"=1'0", 1/2"=1'-0", etc.
View 8 Replies View RelatedI have been working on a drawing for a client in the Metric template, everything displayed in metric, measures in metric, etc. Then this morning when I opened the file, the measurements have switched to imperial. The profile is still the metric one, and when I enter a value for a line length it is clearly using metric because it goes where I expect it to go, however the numbers displayed onscreen are in imperial. Is there an easy way to get this to switch back to displaying in Imperial?
View 1 Replies View RelatedI just spent a bunch of hours creating custom line types using imperial measurements which is the format we use most often with our drawings. Once in awhile we do work in metric and I am wondering if I need to redo the entire line type .lin file using metric values.
View 3 Replies View RelatedI have copied building from metric drawing to imperial template the template i use. Now I want to dimension it but impeial dimension are not equivalent to metric,which should be because building stays the same size, i can scale the building but i want to know if there is way to overcome this issue without scaling the building
View 1 Replies View RelatedI'm working on a project for work where we were given DXF files for a drawing. So I attached this file into AutoCAD at a scale factor of 1. The drawing was originally drawn in metric at 1:200. However, I am working in an imperial file with many other drawings in it as well. How can I scale this drawing up to the right scale in imperial in model space?
View 9 Replies View RelatedI have students working on the assignment below. They want both the Imperial and Metric screws to be drawn. Is there a way to draw both on drawing? When we change our units to metric when we draw our 14mm line it is still drawing it 14" long.
[URL] ....
We have some machines which seem to work in imperial maesurement a dn others which work in metric. it is frustrating when trying to insert a map block that is metric and is inserting into a drawing which is set up as imperial. We have tried using the - dwgunits to change to mm, and then using insunits , insunitsdef source and insunitsdeftarget to 0, this works when the PC is currentyl in use. when shut down and restarted it reverts back to imperial setting.
Am i right in thinking this is something that needs to be done at the software installation stage to make it default to metric everytime?
I need to update metric numbers on a older CAD file to imperial numbers. Right now it is all single line text. Any way to easily convert single line text to some format that could then be converted from metric to imperial? I have stationing, pipe sizes (in milimeter), inverts, etc.
View 7 Replies View RelatedAutoCAD 2010
Wondering if there's a way to enter imperial units in command line of a metric drawin and have it convert imperial to metric.
IE. I'm constantly taking field site dimensions in imperial and it'd be useful if i didn't have to do conversion every time.
Rather than scaling down the model which i have in imperial to metric, is there a way to have my dimension inputs in metric without converting it manually? Btw, if version matters i am using P&ID 2009
View 9 Replies View RelatedI'm trying to determine what my base units are in any drawing that i'm in (In modelspace). Essentially i want to either just read out the current base unit, or simply determine metric or imperial...or even both. I've been browsing through the forums and i've found a few examples, but nothing too detailed. Here is what i have so far, i have a feeling i'm on the write track. Is it possible to read out the value of "PlotPaperUnits"?
namespace UNITTEST {
public class UNITS {
[Autodesk.AutoCAD.Runtime.CommandMethod("UNITS")]
public void UNITSCOMMAND() {
Document doc = Autodesk.AutoCAD.ApplicationServices.Application.DocumentManager.MdiActiveDocument;
[Code] ..........