AutoCAD LT :: Metric To Imperial Dimensions
Apr 19, 2012How do you change the dimension units from default decimal to feet and inches with ACLT 2013?
View 4 Replies
ADVERTISEMENT
AutoCAD 2010 :: How To Enter Imperial Dimensions Into Metric Drawing
Oct 18, 2011I am using 2012 and i would like to enter my dimensions in imperial into a metric drawing with autocad doing an automatic conversion. So let's say i write this:
12'-8-1/2"
Autocad has to take it like that into the metric drawing then, he has to convert this to 3873.5 mm. Is there a code i can put into some autocad file to make this software work like that?
AutoCAD Inventor :: ILogic For Converting Dimensions Imperial To Metric Form
Jul 29, 2012ilogic for converting dimensions imperial to metric form in sketch, part and assembly level
I have one task in this total models(parts and assemblies) having imperial dimensions but customer wants total dimensions in metric form with rounded value.
mean while all the dimensions directly convert to metric form dimensions are having many decimal places but customer wants ronded value like for example <1.5 is 2 and >1.5 is 1 like this. one more example is 2.56 is 3 and 2.46 is 2 like this.
AutoCAD Inventor :: Convert Imperial To Metric In Assembly / Part Level Sketch Dimensions
May 14, 2012I need converting imperial dimensions into metric in assembly as weell as part level sketches dimensions.
Any solution for converting all imperial dimensions to metric dimensions in whole assembly constraint level and as well as part level sketch dimensions. Any macros or any ilogic rules?
AutoCad :: Converting Imperial To Metric / Metric To Imperial
Jul 12, 2012To convert from imperial to metric multiply the length, in inches, by 25.4 (the number of millimeters per inch).
Example: 3 inches converted to millimeters is 3*25.4 or 76.2mm.
To convert from metric to imperial multiply the length, in millimeters, by 0.03937 (the number of inches in a millimeter). For greater accuracy use 0.03937008.
Example: 100 millimeters converted to inches is 100*0.03937 or 3.937 inches.
AutoCAD Inventor :: Conversion Imperial To Metric
May 14, 2012I have one problem like conversion in this project involving things are converting total imperial dimensions in to metric while converting all the dimensions required in single precision like 15/16'' as .9375 mm but he need approximate value like 1 . I have large assembly how to maintain over all dimensions and how to change internal dimensions in simple ways.
View 6 Replies View RelatedAutoCAD Civil 3D :: Imperial To Metric Conversion?
Apr 5, 2012We use Civil 2012.Under Drawing Utilities>Drawing Settings we change International Foot to US Survey Foot. The problem is this setting appears to be per drawing. Is there a way to set it up to remember this setting....system variable I can set in the acadoclisp?
View 5 Replies View RelatedAutoCAD 2013 :: How To Switch Between Imperial And Metric
Nov 20, 2013When in a drawing how do you switch between Imperial and Metric. It seems like it would be such a simple process? When I try to go to Options > User Preferences > Scale List Edit and change it, I then hit apply get back into options and it is switched back to Imperial ? I am basically trying to get this scale list format 1:10, 1:20, etc. instead of 1/4"=1'0", 1/2"=1'-0", etc.
View 8 Replies View RelatedAutoCAD Architecture :: Switched From Metric To Imperial
Jan 11, 2012I have been working on a drawing for a client in the Metric template, everything displayed in metric, measures in metric, etc. Then this morning when I opened the file, the measurements have switched to imperial. The profile is still the metric one, and when I enter a value for a line length it is clearly using metric because it goes where I expect it to go, however the numbers displayed onscreen are in imperial. Is there an easy way to get this to switch back to displaying in Imperial?
View 1 Replies View RelatedAutoCad 2D :: Imperial Vs Metric Linetype Files?
Jan 23, 2014I just spent a bunch of hours creating custom line types using imperial measurements which is the format we use most often with our drawings. Once in awhile we do work in metric and I am wondering if I need to redo the entire line type .lin file using metric values.
View 3 Replies View RelatedAutoCad :: Metric Drawing In Imperial Template?
Aug 1, 2011I have copied building from metric drawing to imperial template the template i use. Now I want to dimension it but impeial dimension are not equivalent to metric,which should be because building stays the same size, i can scale the building but i want to know if there is way to overcome this issue without scaling the building
View 1 Replies View RelatedAutoCad 2D :: Scale Metric DXF File To Imperial
Jun 20, 2013I'm working on a project for work where we were given DXF files for a drawing. So I attached this file into AutoCAD at a scale factor of 1. The drawing was originally drawn in metric at 1:200. However, I am working in an imperial file with many other drawings in it as well. How can I scale this drawing up to the right scale in imperial in model space?
View 9 Replies View RelatedAutoCAD 2013 :: Metric And Imperial Screws To Be Drawn
Nov 9, 2012I have students working on the assignment below. They want both the Imperial and Metric screws to be drawn. Is there a way to draw both on drawing? When we change our units to metric when we draw our 14mm line it is still drawing it 14" long.
[URL] ....
AutoCAD 2010 :: Drawing Units Imperial / Metric
Sep 13, 2013We have some machines which seem to work in imperial maesurement a dn others which work in metric. it is frustrating when trying to insert a map block that is metric and is inserting into a drawing which is set up as imperial. We have tried using the - dwgunits to change to mm, and then using insunits , insunitsdef source and insunitsdeftarget to 0, this works when the PC is currentyl in use. when shut down and restarted it reverts back to imperial setting.
Am i right in thinking this is something that needs to be done at the software installation stage to make it default to metric everytime?
AutoCAD Civil 3D :: Converting Metric To Imperial Stationing
Aug 19, 2013I need to update metric numbers on a older CAD file to imperial numbers. Right now it is all single line text. Any way to easily convert single line text to some format that could then be converted from metric to imperial? I have stationing, pipe sizes (in milimeter), inverts, etc.
View 7 Replies View RelatedAutoCad 2D :: Entering Imperial Units In Metric Drawing
Apr 15, 2011AutoCAD 2010
Wondering if there's a way to enter imperial units in command line of a metric drawin and have it convert imperial to metric.
IE. I'm constantly taking field site dimensions in imperial and it'd be useful if i didn't have to do conversion every time.
AutoCad 2D :: Metric Dimension Inputs In Imperial Model?
Feb 20, 2013Rather than scaling down the model which i have in imperial to metric, is there a way to have my dimension inputs in metric without converting it manually? Btw, if version matters i am using P&ID 2009
View 9 Replies View RelatedAutoCAD .NET :: Determine Current Units (Metric Or Imperial)
Mar 22, 2012I'm trying to determine what my base units are in any drawing that i'm in (In modelspace). Essentially i want to either just read out the current base unit, or simply determine metric or imperial...or even both. I've been browsing through the forums and i've found a few examples, but nothing too detailed. Here is what i have so far, i have a feeling i'm on the write track. Is it possible to read out the value of "PlotPaperUnits"?
namespace UNITTEST {
public class UNITS {
[Autodesk.AutoCAD.Runtime.CommandMethod("UNITS")]
public void UNITSCOMMAND() {
Document doc = Autodesk.AutoCAD.ApplicationServices.Application.DocumentManager.MdiActiveDocument;
[Code] ..........
AutoCad :: Any Comparative Scale Factor Between Metric And Imperial?
Oct 3, 2012I'm new to autocad and came from Metric system country. now I have hard time switching to Imperial system.
1- is there any comparative scale factor between metric and imperial? for instance 1:20, 1:50, 1:250 and so on, compare to what in imperial?.
2 - in the unit dialogue box, if i use metric i only can choose Decimal not any other options like Architectural , engineering..etc. right?
3- if I want to draw in cm or m not millimeter I mean input my distance in cm or m while drawing how to do it?
4- if I want to open a metric drawing in a imperial model space how to switch from M to inch.
AutoCad :: Dynamic Block - Change Imperial To Metric
May 30, 2012I have this block with u-bolts , i don't use imperial and would like to change it to metric , how can this be done?
View 5 Replies View RelatedAutoCad :: Scale Factor Haywire - Imperial To Metric
Sep 20, 2011I have created a project in a metric template, then found that the scale factor is haywire. Is there some way to rest the template with out loosing my work or changing anything other than the physical line properties?
Second, I have loaded the same file onto another students file who's scale factor is A OK and metric. My file LOOKS fine but when i start to add lines or dimension all the properties are imperial.
AutoCAD Civil 3D :: Setting Up Metric DWT Starting With Custom Imperial DWT
Jun 18, 2012I'm setting up some Civil 3D Metric dwt's & we work in Imperial units and have all of our dwt's set up for Imperial units. I'm looking for best practice tips on how to approach this task? Ideally I'd like to use what we have and not re-invent the wheel if that's possible & just convert the needed settings from Imperial to Metric.
After some experimenting it seems merely changing the "Edit Drawing Settings" Drawing Units, Ambient Settings and ddunits etc. this only gets a portion of the unit settings switched throughout the dwt.
I'm unable to switch the "Default Scale List" under Options>User Preferences>Default Scale List from Imperial to Metric as it keeps reverting to Imperial.
Additionally as I view the contents of the "Label Style Composer" of random C3d Label Styles I see inches as a unit etc. (Is there a way to globally convert these style unit settings to Metric)?
Something that seems like it should be fairly straight forward is proving to be anything but...
C3D 2012 SP3 & C3D 2014 SP1
Win 7 Professional 64 Bit
AutoCAD 2013 :: Batch Conversion From Imperial To Metric Not Working
Jul 29, 2013I need to convert a large number of drawings from Imperial to Metric (I have copied that drawings and intend to save as a metric set, so I'll be overwriting (and possible appending "-METRIC" to the file name.) So I wrote a batch file to collect the drawings then apply a conversion (autocad) script.
I also created a script to close the drawings that would run after a batch (i.e. subdirectory (say 20 drwgs)).
If I open the drawings manually and run the scripts, they work fine, however I have been unable to automate the procedure.
Batch to collect files:
SET ACAD2013PATH="C:Program FilesAutodeskAutoCAD 2013"
FOR /R c:ACADCrosby-Converted_to_Metric est %%f in (*.dwg) do start /wait %ACAD2013PATH%acad.exe%%f /b c:ACADscale-imperial-to-metric.scr
start /wait %ACAD2013PATH%acad.exe c:ACADCloseACAD.scr
[code]...
AutoCad 2D :: Scaling Attributed Block - Imperial / Metric Conversion
Nov 11, 2013I have the drawing I'm working on, who's scale is set to "unitless". I'm attempting to insert a series of attributed blocks (containing titleblock information) into the paperspace of my drawing. The attributed block is also set to unitless.
Two of these blocks require editing to suite the drawing, the other two are to be edited at a later date by a third party.
Everything HAD been working fine, however, it appears the wheels have fallen off ~ I'm now experiencing a periodic error where, I insert a block to the 0,0 at a scale of 1 (as per procedure) but the block comes in at a fraction of the correct scale. I have to scale the block up by 25.4. (The imperial / metric conversion.) (Note, I'm working in Metric)
Even stranger - its not happening on all blocks. Just the two that have to be edited "in house".
I've checked measureinit within the blocks and it is set to metric. I'm limited in my ability to purge / audit the drawings as they don't want template information deleted from the drawing - but I don't know what other system variables i should be looking at.
I'm using CivilCad 2012 with Windows 7,
AutoCad 2D :: Inserting Units / Metric / Imperial / Dynamic /Annotative
Apr 18, 2013There wasn't a metric template so I created one. I've also been working on setting up Annotative and Dynamic Blocks. Mostly we work in Imperial and so the blocks were drawn in Imperial units.
When I insert some of my Annotative Blocks (Section marks and Labels, etc.), some insert scaled up 25.4 (which is what I want) and others don't.
Take the attached examples:
SOIL-Gravel.dwg is not Annotative. Insunits is set to 1
NOTE-title.dwg is Annotative. Insunits is set to 1.
I notice on my Insert Dialog Box that the Block Unit Factor changes from 25.4 (SOIL) to 1
(NOTE).
For some reason NOTE-Section Cut (Annotative) inserts at 25.4, but the Dynamic Parameters fail to scale up.
I've played around with INSUNITSDEFSOURCE and INSUNITSDEFTARGET, but neither seem to change. I understand they only work if INSUNITS of the block is 0. Which I have also toggled.
AutoCAD Dynamic Blocks :: Copy Metric And Convert It To Become Imperial?
Jan 12, 2013Why is there no dynamic block for the Imperial Hex Nut in the tool palettes?
Can I copy the Metric and convert it to become Imperial?
Where do I change Metric to Imperial in this dynamic block?
AutoCAD 2013 :: Convert Units From Metric Mm To Imperial Feet / Inches
May 2, 2013I received a .dwg file from S. Korea with dimensions and units all in the metric mm and I need the units to be in feet and inches. Is there a command to switch dimensions and units to imperial feet and inches?
Rather than changing units in command UNITS Inches and Architectural, and SCALE 25.4, is there any other way to switch metric to imperial systems. Scaling somewhat does the trick but, provided dimensions remain in mm.
AutoCAD Inventor :: ILogic Rule To Switch Units In Drawing Between Imperial To Metric
Apr 22, 2013I would like a few rules to be triggered once the new drawing template is opened.select sheet size, I have been given a rule that already works, basically the rule selects a border and title block based on sheet size selection.
trigger = iTrigger0iLogicForm.Show("BorderChange", FormMode.Modal)iLogicVb.UpdateWhenDone = TrueIf Parameter("BorderSize") = "A0" Then ActiveSheet.ChangeSize("A0", MoveBorderItems := True)ActiveSheet.TitleBlock = "MJTD A0"ActiveSheet.Border = "MJTD A0.
[code]....
I would also like a rule to let me annotate in metric or imperial. this is where I require assistance. I am not sure the best way to achieve this rule. My programming is very basic.I have found some links here, but I can't seem to make them work in the drawing environment. Also these rules seems to change the units of an already created .ipt.
Rule #1 Link
Rule #2 Link
I am just looking for a rule to select either .in or mm from the styles library(i think) , before I even place a base view. Regardless of the original units used to make the model.
AutoCAD Visual LISP / AutoLISP :: Scaling DWGs From Imperial To Metric And Back Again?
Oct 24, 2013I'm looking for a routine that I can choose to scale by 25.4 (Imperial to Metric) or .039370079 (Metric to Imperial).
We just got a CNC Machine that works with metric and people keep asking me to make changes in bothe formats.
I'm using CAD 2014.
Revit :: Indicate Alternate Units Imperial / Metric?
Feb 13, 2009Is it possible to indicate alternate units, imperial/metric?
View 3 Replies View RelatedRevit :: Change Project Units To Metric From Imperial
Jul 25, 2013I have just downloaded Revit 2014 and I can change my project units to metric from imperial but all my families are still in imperial, I was wondering how to change those to Metric too.
View 9 Replies View Related