I have a set of 8 coordinates that outline a pit. I have been asked to calculate it's volume. I have input the coordinates, and have produced a 3D image of the pit. I was hoping to be able to convert the object (the pit) that I have created to a solid, so I could then determine the volume, although it is proving to be difficult.
how I could calculate the volume of this pit?
I have an irregular 3D solid, a slab with an opening, and I want its coordinates. However, Autocad provides coordinates only for a simple 3D face.
I plan to use 'Xedges' to get its all edges first, and then get coordinates of these lines.
I have a mesh box here, and I need this mesh box had shape like the form I drew with polylines. there is a picture of it. I tryed mesh modeling,but no luck, because I need exactly the shape (of mesh box), that is drawn with polyline
View 1 Replies View RelatedI have a inuniform shape and I want to get the volume of it. How to get the volume of a solid shape?
View 1 Replies View RelatedI´d like to do something like that, convert a internal volume in a solid and delete the external solid.
[URL]
calculate the volume.I attached here my dwg file. I never done this before and I want to know the correct answer when I want my land to be levelled at 6m.How much volume to fill and the land to be removed.
View 9 Replies View RelatedThere are points in different levels i wanna make the surfer with this points and project the surfer on the down surfer(that makes with other points) after that make an enclosed Volume and finally Calculate the Volume between this 2 surfer. How its possible to Calculate?
View 8 Replies View RelatedI am trying to calculate muck away for work, and I have drawn the site plan in millimetres for accuracy. However when I try to calculate the volume I get this value: 3.6293E+12. I am guessing that it is saying this due to the fact its in millimetres, and I am trying to calculate a large area and convert in into metres squared. What this value means?
View 1 Replies View RelatedThen I need to extrude it, but when I extrude, it's shallow. So this 2D polygon need to have face. I've tried 3DFACE but then I need to add faces manually. Is there any way to just specify this polygon and have it faced?
View 9 Replies View RelatedI have a problem when calculating the volume of a design plan, the slope of the land, the design had to be made so as not to slide trap. How it makes grading a trap,
View 2 Replies View RelatedIs it possible to calculate the volume in this elbow for liquid?
View 1 Replies View RelatedI'm trying to work out a way to calculate the fill volume difference for a proposed landscaping plan (images attached) and how to model and calculate the amount of fill required to do the job.
Site-Plans-4-Recovered.jpgSite-Plans-4-Recovered2.jpg
I need information on how to create a 3D Solid Model from wireframe and surfaces using AutoCAD 2013.
View 7 Replies View RelatedHow to calculate in a table the volume of cut and fill between the stations, The horizontal and vertical alignments are generated along with their sections. I’m wondering if there is a tool that summarize the volume of cut and fill between the stations in a table.
View 3 Replies View RelatedWith command massprop I can get many interesting data about 3d object, but where can I set material that my object is made of. Lets say I need to calculate volume and mass of my object which is made of aluminium, what are my options?
View 3 Replies View RelatedI have a curved piece of acrylic in a design that is a section of a cone with 2 holes in it (for a structure to pass through), I need to try and flatten it for CNC matching.
View 1 Replies View RelatedI use Civil 3D 2011 and I am new to it. I have created a natural ground surface from survey points. Now i want to create a finished surface with a specific slope in a specific direction at a specific elevation and then to calculate cut and fill volume.
I can create a flat surface at a specific elevation. How to tilt this surface to a specific slope along a specific direction.
At my job site, they is about 20meter height of uneven rock surface in the excavation pit.
To calculate the volume ,I need to include this uneven rock surface wall.
For doing so,The sharp edge will displays in the cross section.
Because the uneven surface, I cannot create the surface with normal step.The TIn line will joins horizontally,not in vertical direction as is intended.
AutoCAD Civil3D 2014
Inter(R)Core(TM) i7-3770 cpu@3.40GHZ
RAM 8.00GB
64-Bit window7
QuadroK6000
Having a surface, and then applying a building pad, how can i discover the volume of excavation?
View 1 Replies View RelatedHow can I create the irregular shape?
View 3 Replies View RelatedHow to calculate Column quantity and gross volume.
View 8 Replies View RelatedI should design a Silicone model for a Breast Cancer Survivor. My problem is the Irregular Geometric Shape of silicone. I tried "Sphere"/ "Loft" commands,but I didn't get my desired outcome! I also drew the 2D base by "Spline"; however,"Extrusion" was not a good option to make it look like a 3D silicone!
View 9 Replies View RelatedI need to divide irregular shapes into equal parts. For example, the attached shape needs to be divided into 10 equal parts. Parametres could be set such as all dividing lines are horizontal.
I need to do this in autocad (2013) if possible.
The closest discussion I found on this was at [URL] ......
I am trying to create a 3D meshed surface from an irregular shaped solid I created using firstly a SPLINE, FILLET, PEDIT, and EXTRUDE. I have a solid in the basic shape now, but I am trying to create a meshed top and bottom (x, y, z,) to change the contours of those surfaces. I have looked at 3DMesh but it asks for (n,M,) coordinates like it is a regular shaped surface (square, rectangle) where one can calculate the required even spacing needed.
My goal is to create in CAD something like a fine art carved piece of wood, with irregular shaping and no straight planes or surfaces.
I have included a basic picture in JPEG format for your review. This is the item from which I am trying in ACAD 2010 to construct into a usable adjustable form so I may parametric for my needs.
How could make big size pipe with irregular section shape by using Civil 3D?
View 5 Replies View RelatedHow could make big size pipe with irregular section shape by using Civil 3D?
View 3 Replies View RelatedI work with maps, and i hatched a area, with a irregular shape, now i want to know this area, how can i proceed?? I already selected all area and clicked on properties to see Geometry information, acumulative... Did the List Comand.. and nothing.
View 9 Replies View Relatedif this is easy, but how do I calculate the volume of concrete needed to pour a cast-in-place spiral stair?
View 1 Replies View RelatedI have a.3ds file imported into Civil 3d. The object imported as a polymesh in Civil 3d. I need the solid 3d object to do some edit like slice or union and subtract.
The question is "How can I import .3ds into Civil 3d as a solid objects or hoe can i convert polymesh to solid?"
I need finding the volume of a solid (not the amount a solid can hold) in Autocad 2011 for Mac.
View 1 Replies View RelatedHow can i convert some solid bodies to a single solid.
View 8 Replies View Related